• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.321-324
• /
• 1999

This paper was presented to BaTiO$_3$-SrTiO$_3$(BST) ceramic capacitor in using high voltage. Structural and electrical properties of BST ceramic capacitor were researched in accordance with SrTiO$_3$ contents. As the result of investigation, the BST1 ceramic capacitor was showed to stable dielectric properties between 25 and 85[$^{\circ}C$]. According as frequency was increased, relative permittivity was decreased because inner spontaneous polarizations were decreased. As supplied voltage was increased, relative permittivity of specimen was varied in 3.04 ~3.98[%].

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.339-342
• /
• 1998

A high performance, high-dielectric stripline filter has been developed. The filter consists of planar resonators and its structure is made of high permittivity multilayer ceramic. The performance is distinctive with its attenuation pole. An equivalent lumped circuit is derived to explain the behavior of the attenuation pole quantitatively. A precise design procedure is also described.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.80-80
• /
• 2009

$BaTiO_3$ has high permittivity so that has been applied to dielectric and insulator materials in 3D system-level package integration. In order to achieve excellent performance of device, the $BaTiO_3$ layer should be highly dense. In this study, $BaTiO_3$ thick films were prepared by the inkjet printing method using 4 vol.% $BaTiO_3$ colloidal inks and cured at $28^{\circ}C$ for 5 h after infiltration of polymer resin for non-sintered process using 3 vol.% cyanate ester emulsion ink. From the obtained results. packing density was determined to be improved by overlapping rabbit ears which were generated by coffee ring effect. We also calculated the packing densities of the films and correlated these packing densities to the measured permittivity of the films.

• 한국전자파학회논문지
• /
• 제11권6호
• /
• pp.996-1005
• /
• 2000

본 논문에서는 저유전체의 한 면에 고유전체를 부착하는 기존의 광대역 기법을 개선하여 새로운 광대역 세라믹 유전체 안테나를 제시하였다. 제안한 광대역 기법을 사용하여 광대역 안테나를 설계할 수 있었으며 대역폭의 감소문제를 줄일 수 있었다. 본 논문에서 제안한 세라믹 유전체 안테나의 경우 10dB 반사손실에서 대역폭을 33.9%까지 증가시켰으며 세라믹 유전체 안테나의 특성은 실험치와 유한요소법을 사용한 해석치가 잘 일치함으로써 확일할 수 있엇다. 제안한 세라믹 유전체 모델을 사용하여 PCS 및 IMT-2000 이중대역에서 사용이 가능한 광대역 안테나를 설계, 제작하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.143-146
• /
• 2002

A multilayer two-stage bandpass filter using dissimilar low-temperature cofired-ceramic (LTCC) materials is proposed in this paper. The proposed bandpass filter is composed of ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. Inductive elements are designed in a low permittivity ceramic layer to reduce parasitic effects and loss, while capacitive elements are designed in a high pertimitivity ceramic layer for size reduction. The center frequency of the proposed filter is 1.842 GHz, and the performance of the filter is analyzed and compared with the conventional LTCC filter with single material in terms of integration density, size reduction, and performance improvement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.271-271
• /
• 2010

$BaTiO_3$(BT) has high permittivity so that has been applied to dielectric and insulator materials in 3D system-level package integration. In order to achieve excellent performance of device, the BT layer should be highly dense. In this study, BT thick films were prepared by the inkjet printing method. And these films were cured at $280^{\circ}C$ after infiltration of polymer resin. As a result, we have successfully fabricated not only the inkjet-printed hybrid BT film but also metal-insulator-metal(MIM) capacitor without sintering process. Changes in the dielectric constant of BT hybrid film with particle size and packing density were investigated. The dielectric constant was increased with increasing packing density and particle size. Further, the BT hybrid film using two different size particles had even higher packing density and dielectric constant.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1673-1677
• /
• 2008

본 논문은 UHF 대역의 RFID(Radio frequency identification) 태그의 인식률에 대한 연구이다. RFID 태그 안테나가 고유전율을 가지는 제품에 부착되는 경우에 태그 안테나의 성능 변화 때문에 인식률 저하 문제가 발생 한다. 본 연구에서는 상용화 된 태그 안테나를 도자기 표면에 부착하였을 때 안테나의 전기적인 특성 변화를 살펴보았고 태그 안테나를 튜닝한 후 태그 인식률이 현저히 개선됨을 보였다.

• 한국세라믹학회지
• /
• 제29권3호
• /
• pp.177-182
• /
• 1992

The effect of heat-treatment temperature on the microwave absorbing properties was investigated in Ni0.8Zn0.2Fe2O4 specimens. The composite specimens were prepared by modling and curing the mixture of prereacted ferrite powder and silicone rubber. The measurement of complex permeability and permittivity was made by the reflection/transmission method. The most sensitive material constants with heat-treatment temperature is the imaginary (loss) component of permeability. The higher the heat-treatment temperature, the greater the magnetic loss. The composite specimens with high magnetic loss exhibited superior microwave absorbing properties. The quantitative estimation of microwave absorbing properties were made by plotting the observed material constants on the calculated solution map of impedance-matching.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.323-324
• /
• 2006

저온동시 소결용 세라믹스, LTCC를 사용한 RF/MW용 고유전율 세라믹을 개발하기 위하여 300이상의 고유전율과 낮은 손실 계수를 가지는 것으로 알려진 $Ag(Nb_{1/4}Ta_{3/4})O_3$ 고용체와 $CaTiO_3$, $TiO_2$를 각각 혼합하여 공진주파수의 온도 계수가 0에 가까운 안정된 유전체 특성을 얻고자 하였다. 유전율의 온도 안정성을 도모하기 위해 음의 온도 계수를 갖는 $CaTiO_3$, $TiO_2$와 양의 온도계수를 갖는 $CaTiO_3$ 및 $TiO_2$를 일정 분율로 혼합한 복합체 구조의 시편을 제작하였다. LTCC 소자로의 적용을 위해 3wt.%의 CuO를 첨가하여 소결 온도를 낮추었으며, 소결 시편의 상 분석, 미세구조 및 전기적 특성을 조사하였다.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.340-345
• /
• 2003

B $i_2$ $O_3$-Ti $O_2$ composite dielectric ceramics have been prepared by a conventional solid state ceramic route. The composite ceramics were prepared with starting materials of different origin and the microwave dielectric properties were investigated. The sintered ceramics were characterized by X-ray diffraction, scanning electron microscopy, energy dispersive X-ray microanalysis, Raman and microwave methods. Structural and microstructural analyses identified two separate phases: Ti $O_2$(rutile) and B $i_2$ $Ti_4$0$_{11}$. The separate grains of titania and bismuth titanate were distributed uniformly in the ceramic matrix. The composition 0.88Ti $O_2$-0.12B $i_2$ $Ti_4$ $O_{11}$ was found to have a Q$\times$f of 9300 GHz (measured at a frequency of 3.9 GHz), a temperature coefficient of frequency, $\tau$$_{cf}$ near zero and a high relative permittivity, $\varepsilon$r of 83. The microwave dielectric properties were measured down to 20$^{\circ}$K K. The quality factor increased on cooling the ceramic samples.les.