• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.399-405
• /
• 2005

In this study, we investigated the gas chromatography (GC) and pulsed flame photometric detection (PFPD) system for the analysis of four major reduced S compounds including hydrogen sulfide ($H_2S)$; methyl mercaptan ($CH_3SH$); dimethyl sulfide (DMS); and dimethyl disulfide(DMDS) contained in environmental samples. To analyze these compounds in high concentration range (above ppb level), we developed a high mode analytical setting with the loop-injection system. By contrast, we also established a low mode setting for the analysis of low concentration samples (ppt-level samples from ambient air) by the combination with thermal desorption unit(TDU). Comparative analysis of both settings revealed that relative detection properties of four S compounds are systematic enough. The results of high mode analysis indicated that the patterns were systematic among compounds: H2S exhibited the lowest sensitivity, while DMBS showed the strongest one. The results were also compared in terms of sensitivity reductions for all compounds by dividing slope ratios between low and high mode system. Although low mode system exhibited significant reductions on the order of a few tens times, their detection characteristics were highly consistent as it was shown in the high mode setting. To learn more about absolute and relative relations between two different modes of S analysis, future studies may have to be directed to cover more complicated nature of GC/PFPD performance. Hydrogen sulfide($H_2S$) was over in summer about low level of olfactory sense 410 ppt, Methyl mercaptan(C$H_3SH$) was over in apring and summer about low level of olfactory sense 70, Dimethyl sulfide(DMS) was not over in four season about low level of olfactory sense 2,200 ppt. Carbon disulfide($CS_2$) was not over in four deason about Tow level of olfactory sense 210,000, Dimethyl disulfide(DMDS) was not over in summer about low level of olfactory sense2,000.

• Journal of Environmental Science International
• /
• v.11 no.6
• /
• pp.577-582
• /
• 2002

Selective catalytic reduction and selective non-catalytic reduction processes are mainly used to treat nitrogen oxidants generated from fossil-fuel combustion. Especially, the selective non-catalytic reduction process can be operated more economical and designed more simply than the selective catalytic reduction. For this reason, many researchers carried out to increase the removal efficiency of nitrogen oxidants in the condition of low oxygen concentration by using the selective non-catalytic reduction process. However, this study was flue gas contained high oxygen concentration of 20(v/v%) with ammonia as a reducing agent. Moreover, it carried out experiment with many factors that are reaction temperature, retention time, initial NO concentration, NSR(normalized stoichiometric ratio). It was determined optimal operating conditions to improve NO removal efficiency with SNCR process. The De-NOx efficiency was increased with NSR, initial NO concentration and retention time increasement. This study has NO removal efficiency over 80% in the high oxygen concentration as well as low oxygen concentration. The injection of reducing agent may be considered for SNCR process and facility operation in 850$\^{C}$ of optimal condition.

• Journal of Medicine and Life Science
• /
• v.16 no.1
• /
• pp.31-33
• /
• 2019

Hypercalcemia is often seen in patients, but most of them showed mild to moderate hypercalcemia. The severe hypercalcemia with a blood calcium level of 14.0 mg/dL or more is known to be associated mainly with malignant tumors. Because this is emergency status, most clinicians tried to decrease serum calcium level to near normal range to improve symptoms related to hypercalcemia. A 71-year-old female patient visited the emergency room with dizziness and general weakness. Her serum calcium level was very high (15.6 mg/dL), but serum PTH, 25-OH vitamin D, and PTH related peptide were normal. We can exclude hyperparathyroidism, familial hypocalciuric hypercalcemia, other connective tissue diseases, and hypercalcemia due to malignant tumors as a cause of severe hypercalcemia. Conclusively, we diagnosed as severe hypercalcemia due to high-dose vitamin D injections treated one week ago. High dose vitamin D injections have recently been shown to increase the frequency of prescription as the various causes and the clinicians needed to carefully monitor the serum calcium levels in the patients after treating with high dose vitamin D.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.3
• /
• pp.411-416
• /
• 1993

We assessed effects of ovine luteinizing hormone (oLH) and follicle-stimulating hormone (oFSH) on the granulose and theca layers from the four largest follicles, $F_1-F_4$ of hens which had been hypophysectomized 12 h before expected ovulation. Ovine LH (0.4 mg), oFSH (0.4 mg) or oLH in combination with oFSH (0.4 mg each) was injected intravenously 6 h after hypophysectomy. Progesterone, testosterone and $estradiol-17{\beta}$ levels of the granulose and theca layers which were removed 6 h after hormone injection, were measured by radioimmunoassay. Progesterone contents of $F_1-F_3$ granulosa layer at 12 h after hypophysectomy were much lower than those of control hens. This reduced progesterone level was restored partially by the injection of oLH alone for $F_1$, while no follicles responded to oFSH treatment. In contrast, the injection of oLH in combination with oFSH resulted in high progesterone content of the granulose layer from all four follicles. Progesterone content of the theca layer was negligible in all treatments. Simultaneous injection of oLH and oFSH also elevated $estradiol-17{\beta}$ level accumulating in the theca layer from all follicles, of which much higher concentrations of $estradiol-17{\beta}$ were observed when comparison were made to each of their corresponding controls. No appreciable change in testosterone contents of two layers was observed in the present experiments. These results suggest that oFSH augments function of oLH to stimulate the production of progesterone in the granulose layer and $estradiol-17{\beta}$ in the theca layer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.19-25
• /
• 2008

In this study, we fabricated Organic Thin Film Transistors(OTFTs) with $C_{60}$ hole injection layer between organic semiconductor(pentacene) and metal electrode, and we compared the electrical characteristics of OTFTs with/without $C_{60}$. When the $C_{60}$ hole injection layer was introduced, the mobility and the threshold voltage were improved from 0.298 $cm^2/V{\cdot}s$ and -13.3V to 0.452 $cm^2/V{\cdot}s$ and -10.8V, and the contact resistance was also reduced. When the $C_{60}$ is inserted, the hole injection was enhanced because the $C_{60}$ prevent the unwanted chemical reaction between pentacene and Au. Furthermore, we fabricated the OTFTs using Al as their electrodes. When the OTFTs were made by only aluminum electrode, the channel were not mostly made because of the high hole injection barrier between pentacene and aluminum, but when the $C_{60}$ layer with an optimal thickness was applied between aluminum and pentacene, the device performances were obviously enhanced because of the vacuum energy level shift of Al and the consequent decrease of the hole injection barrier which was induced by the interface dipole formation between $C_{60}$ and Al. The mobility and $I_{ON}/I_{OFF}$ current ratio of OTFT with $C_{60}/Al$ electrode were 0.165 $cm^2/V{\cdot}s$ and $1.4{\times}10^4$ which were comparable with the normal Au electrode OTFT.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.11
• /
• pp.1761-1769
• /
• 2007

This experiment was conducted to determine the extent to which susceptibility to cortisol-induced follicle shutdown is influenced by fleece phentotype. Twenty Finewool (10 sheep low fibre diameter, low coefficient of fibre diameter-LL and 10 low fibre diameter, high coefficient of variation of fibre diameter-LH) and twenty Strongwool (10 low fibre diameter, low coefficient of variation of fibre diameter-HL and 10 high fibre diameter and high coefficient of variation of fibre diameter-HH) sheep of 9 months of age were individually penned in an animal house and were injected intramuscularly with an aqueous suspension of hydrocortisone acetate at a rate of 1.42 mg/kg body weight for a period of two weeks. Fibre diameter was measured from clipped tattooed patch wool samples. Follicle activity was measured by histological changes in skin biopsies taken weekly. Blood samples were collected at two-week intervals and plasma cortisol measured. Increased plasma cortisol concentration significantly (p<0.05) reduced clean wool production and mean fibre diameter dropped to its lowest level four weeks after commencement and two weeks after the cessation of cortisol injection. Elevation of plasma cortisol concentration significantly (p<0.0001) increased the percentage of inactive follicles two weeks after injection started. High fibre diameter groups (Strongwool sheep; i.e. HL+HH) had significantly (p<0.0001) higher percentage of follicle shutdown than low fibre diameter groups (Finewool sheep; i.e. LL+LH). Average percentage of shutdown follicles for Finewool (LL+LH) and Strongwool (HL+HH) Merino sheep was $9.8{\pm}0.9$ and $13.5{\pm}0.9$ respectively. Shutdown of primary follicles was more pronounced in Finewool than Strongwool sheep. There was no significant effect of coefficient of variation of fibre diameter on propensity to follicle shutdown induced by exogenous cortisol. It is concluded that elevation in plasma cortisol concentration is inhibitory to the normal activity of follicles in Strongwool sheep but that variation in fibre diameter has little or no effect.

• The Journal of Korean Medicine
• /
• v.37 no.3
• /
• pp.47-61
• /
• 2016

Objectives: The objective of this research is to develop new animal-experimental model for Sasang Constitutional Medicine, especially for partial Taeyangin(one of four constitution which has good pulmonary function and poor hepatic function) by AAP intraperitoneal injection, and to estimate from the viewpoint of obesity and lipid metabolism. Methods: The C57bl/6J mice was divided into 4 groups ; Normal group, AAP group, High-Fat-Diet(HFD) group, and HFD+AAP group. 200mg AAP was injected intraperitoneally to the AAP group twice a week for six weeks, and HFD group was fed with 60%-High-fat Diet for six weeks. HFD+AAP group got both AAP injection and 60%-High-fat Diet at the same time for the same period. In this period, We measured the weight and Food Efficiency Ratio(FER, %) once a week. After six weeks, We conducted the blood chemical test from the groups, and extracted the fat tissue to measure weight. Results & conclusion: In the liver function test, two AAP groups had higher AST and ALP, and normal LDH. The blood level of creatinine from all groups were normal. The rate in weight was lesser by 7.8% in HFD+AAP group, and had lesser FER than HFD group. Also They had lesser Total cholesterol and LDL cholesterol, and had more HDL cholesterol than HFD group. HFD+AAP group hadmore glucose in serum and lesser Insulin-like Growth Factor 1(IGF-1) than HFD group.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.9
• /
• pp.1209-1214
• /
• 2000

Objectives : The measurement of resistance to cerebrospinal fluid outflow($R_o$) can clearly delineate cerebrospinal fluid dynamics in patients with ventricular dilatation and can help in selecting patients to undergo shunt placement. With regards to type of infusion method, bolus injection is known to be more practical and safer than continuous infusion. The purpose of this study was to obtain $R_o$ of normal adults using lumbar bolus injection method. Material and Methods : Twenty adults aged 25 to 52 years were studied using lumbar bolus injection method. Fifteen patients with hemifacial spasm and five with cerebral concussion underwent $R_o$ measurement under propofol general anesthesia and local anesthesia, respectively. Results : The mean values of $R_o$ determined 1 minute and 2 minutes after bolus injection were $4.8{\pm}1.7$ and $4.4{\pm}1.6mmHg/ml/min$, respectively. There was no significant difference of $R_o$ between propofol general anesthesia group and local anesthesia group. Two patients showed $R_o$ greater than 6mmHg/ml/min. One patient revealed unexpectedly high level of $R_o$ due to severe spinal stenosis. Conclusion : Mean Ro in this study was higher than that of Shapiro's study. Borderline Ro near 6mmHg/ml/min should be regarded with caution and compared with clinical symptoms and results of other studies. Patients with severe spinal stenosis should be evaluated with caution.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.65-72
• /
• 2011

In this study, the numbers, sizes of particles from a single cylinder direct injection spark-ignition (DISI) engine fuelled with gasoline and LPG are examined over a wide range of engine operating conditions. Tests are conducted with various engine loads (2~10bar of IMEP) and fuel injection pressures (60, 90, and 120 bar) at the engine speed of 1,500 rpm. Particles are sampled directly from the exhaust pipe using rotating disk thermodiluter. The size distributions are measured using a scanning mobility particle sizer (SMPS) and the particle number concentrations are measured using a condensation particle counter (CPC). The results show that maximum brake torque (MBT) timing for LPG fuel is less sensitive to engine load and its combustion stability is also better than that for gasoline fuel. The total particle number concentration for LPG was lower by a factor of 100 compared to the results of gasoline emission due to the good vaporization characteristic of LPG. Test result presents that LPG for direct injection spark ignition engine help the particle emission level to reduce.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.587-594
• /
• 2016

Various surface treatments and thin film coating processes on the surface of injection die steel have been developed to extend the life. Most of previous studies were mainly focused on investigating the wear and static bonding behavior of thin films. In this study complex surface treatments of DLC coating combined with ion nitriding were applied to increase fatigue life and wear resistance. Ion nitriding, DLC coating, and DLC coating following nitriding on the surface of Fe-3.0Ni-0.7Cr-1.4Mn-X steel were investigated to uncover the beneficial effect which is applicable to injection die. The effect of various surface treatments and coating conditions on high cycle fatigue resistance was studied. Surface morphology change during fatigue tests were observed with AFM. Fatigue life of the die steel increased by 10 to 1,000 times at the various level of stress amplitudes in the condition of DLC coating following the ion nitriding for 3 hrs comparing with the only DLC coated condition.