Organic photovoltaics (OPVs) have attracted significant interest in an interdisciplinary research field for the decades as a next-generation photovoltaic device due to their unique advantages. One of requirements for OPVs having high power conversion efficiency is the favorable energy level alignment between the electrode/organic and organic/organic interfaces to manage the exciton dissociation and improve the charge transport. In this review, strategies to enhance the OPV performance by controlling the energy level alignment are discussed. The insertion of an exciton blocking layer leads to the efficient dissociation of photogenerated excitons at the donor/acceptor interface enhancing the short-circuit current density. The choice of a donor having a high ionization energy and an acceptor having a low electron affinity increases the open-circuit voltage. The insertion of an appropriate work function modifier which reduces the charge injection barrier removes the S-kink in current density-voltage characteristics of OPVs and improves the fill factor. This review would give a valuable guide to design the efficient OPV structure.
The study was carried out on the biochemical characters of Cd-BP(II) after isolation and purification of the protein from the liver of rat ip injection with Cd. A continued study has been doing whether Cd-BP(II) could be induced by Cd or by the other metals such as Zn and Cu. Antisera were made against the antigen of Cd-BP(II) from New Zealand white rabbits. We carried out g-globulin purification, then Ouchterlony test and gel immunodiffusion test. Cd-BP(II) was also found in normal tissues of rat. It was induced up to a considerable level by Cd, whose induced level was higher than that Cu or Zn treatment. The level of induction by Cu or Zn pretreatment plus Cd treatment was lower than that by single treatment of Cu or Zn. Such a result was presumably related to the Cd toxicity.
Song, Zhigang;Zhu, Lixian;Zhao, Tong;Jiao, Hongchao;Lin, Hai
Asian-Australasian Journal of Animal Sciences
/
v.22
no.10
/
pp.1400-1406
/
2009
The effects of dietary copper (Cu) supplementation in broiler chickens challenged with a single injection of Salmonella typhymurium lipopolysaccharide (LPS) on the antioxidant capacity and plasma levels of ceruloplasmin (Cp) were evaluated. The broiler chickens were provided with a basal diet or diets supplemented with 8 and 50 mg/kg Cu from 1d of age. At 25d of age, 48 chickens with similar body weight were selected from each diet. Half of the chickens in each dietary treatment were injected intraperitoneally (i.p.) with LPS (1 mg/kg body weight). The other half was injected with saline, serving as the control. Body weight gain and feed consumption were significantly suppressed by LPS challenge during the first 12-h after injection, regardless of dietary Cu levels. Feed efficiency was reduced by LPS injection during the 72-h experimental period. Dietary Cu levels had no significant effect (p>0.05) on the plasma ceruloplasmin concentrations in chickens injected with saline. In contrast, high dietary level of Cu elevated plasma Cp levels in chickens with LPS challenge. Short-term LPS challenge had no significant effect on the antioxidant ability of broilers, as indicated by superoxide dismutase, ferric reducing/antioxidant power and the thiobarbituric acid reacting substances in the plasma. The result suggests that high dietary Cu level (as much as 50 mg/kg supplementation) is favorable for coping with short-term LPS challenge through upregulating plasma Cp levels.
If any of the set parameters such as the environment temperature, mold temperature are not maintained at a consistent level, the fail rate of injection molding products is increased. The price of the injection molding machine is very high, so in order to maximize the utilization of the machine that is required the production of a number of different products with minimum fail rate using a single machine. To prevent the defect products by an inspection process with perfect quality is very important to minimizing production of defect products in the molding process. Vision inspection systems are widely utilized in various manufacturing industries for quality assurance purposes. The vision inspection system consists of CCD camera and lighting system to capture the image of the subject of inspection, an image comparison algorithm using to determine the pass/fail of the products, and mechanical devices for the operation of the whole system. This research focuses on the development of the vision inspection system to process the inspection of an automobile parts. We developed a mechanical devices for the inspection of the injection molding products and an image comparison algorithm to determine the pass/fail result of the inspection based on the molding image and the accepted product image.
In order to study the effect of croton oil on the mucous cell in the mice intestin the experimental animals were injected with 0.1gm body weight of croton oil through intraperitoneally. They were sacrificed by ether anesthesia and obtained from distal small intestine and duodenum and colon, and fixed in 10% meutral formal. After embedded in paraffin, sectioned in 5 micro thickness, and stained with P.A.S (Periodic Acid Schiffis) reaction. The average number of the mucous cell was counted in each specimen over 20 fields under 450 magnification. The following results were obtained; 1) An average number of mucous cell began rapidly increase from 15 min and reached high average number after injection of croton oil of mucous cell from 30-60 min after injection. 2) An average number of mucous cell rapidly increase after injection of croton oil and were not reduced normal level by time lapsed 48 hrs. 3) The mucous cell showed with tape of time after injection of croton oil. A type and B type decrease and showed recovery C type decrease and recovery. 4) According to the above findings, it is presumed that croton oil accelerate secretion of mucin of the mucouse cell and production of mucin in growing mucous cell.
Temperature and injection current dependence of elctroluminescence(EL) spectral intensity of the $In_{0.27}Ga_{0.73}N/GaN$ multi-quantum-well(MQW) have been studied over a wide temperature and as a function of injection current level. EL peaks also show significant broadening into higher photon energy region with the increase of injection current. This is explained by the band-filling effect. When temperature is slightly increased to 300 from 15 K, the EL emission peak showed red-blue-red shift. It can be explained by the carrier localization by potential fluctuation of multiple quantum well and band-gap shrinkage as temperature increase. It is found that a temperature-dependent variation pattern of the EL efficiency under very low and high injection currents show a drastic difference. This unique EL efficiency variation pattern with temperature and current is explained field effects due to the driving forward bias in presence of internal(piezo and spontaneous polarization) fields.
Cha, Byung Su;Song, Chul Ki;Cho, Woo Hyun;Yang, Won Ock;Lee, Ho Seong
Journal of the Korean Society of Manufacturing Process Engineers
/
v.21
no.5
/
pp.67-76
/
2022
The customer demand for diverse colors in home appliances has increased. However, this has led to issues for manufacturers, such as ensuring cost effectiveness and high-level quality control. To resolve these issues, production engineers utilize computer-aided engineering (CAE) tools for injection-molding processes and assess the suitability of process parameters for products manufactured using the in-mold labeling method. CAE can solve various problems in manufacturing processes, thereby increasing production efficiency and decreasing manufacturing cost. In addition, it can be used analyze customer complaints related to surface defects, such as part differences and irregular spacing between parts, and ultimately reduce product returns. In this study, CAE was used to solve quality problems and implement the most economical manufacturing process.
Chaung, Seung-Kyo;Choi, Min-Jung;Park, Jin Hee;Kim, Hyun-Ju;Song, Kyeong-Yae
Journal of Korean Academy of Fundamentals of Nursing
/
v.24
no.4
/
pp.277-285
/
2017
Purpose: The purpose of this study was to identify occurrence of needle stick and sharp injuries(NSI) among students, level of faculty stress, and necessity of informed consent when students practice injection skills in fundamentals of nursing practice (FNP). Methods: Data were collected using self-reporting questionnaires and 74 faculty members who teach FNP responded it. Questionnaires included general characteristics, experiences of NSI, stress level, and informed consent. Data were analyzed using frequency, percent and paired t-test. Results: Of 74 faculty members, 51.4% experienced NSI 3~4 times or more during their FNP classes. Major procedures causing NSI during FNP were 'breaking the neck of ampules', 'disposing of used items', and 'inserting needles'. The stress level of faculty was higher and more than doubled when training with human beings compared to manikins. Most faculties (86.5%) agreed to the necessity of informed consent so that the safety of faculty and students could be protected and to provide enough information even though only 10.8% of faculty in this study got informed consent. Conclusion: Because there is high risk in every procedure of NSI, faculty has a high level of stress during injection practice in FNS. Therefore, it is necessary to develop a standard NSI precaution program for junior nursing students and discuss informed consent.
Kim, Kidong;Suh, Dong Hoon;Cheong, Hyun Hoon;Yoon, Sang Ho;Lee, Taek-Sang;No, Jae Hong;Kim, Yong-Beom
Clinical and Experimental Reproductive Medicine
/
v.41
no.1
/
pp.33-36
/
2014
Objective: To estimate the failure rate of medical treatment and to identify variables associated with treatment failure in patients with tubal pregnancy and an initial serum level of human chorionic gonadotropin (HCG) over 10,000 IU/L. Methods: The inclusion criteria were tubal pregnancy diagnosed using ultrasonography, primary treatment of intramuscular methotrexate injection at one of the four institutions between January 2003 and December 2011, a serum HCG level within two days before treatment >10,000 IU/L, and follow-up data to determine treatment success or failure. Exclusion criteria were other primary treatments besides intramuscular methotrexate injection. The clinicopathologic data of 36 patients were collected and analyzed. Results: Medical treatment failed and surgery was performed in 19 (53%) patients. In univariable analysis, age, parity, and size of the gestational sac were associated with treatment failure, but none of the variables were associated with treatment failure in multivariable analysis. The failure rate in the subgroup with age<33 years and size of gestational sac ${\geq}1.1cm$ was significantly higher than those of the other subgroups (82% vs. 41% [mean of the other subgroups], respectively). Conclusion: Patients with a serum HCG level >10,000 IU/L who received medical treatment had a high failure rate. Among them, patients aged<33 year and with a gestational sac ${\geq}1.1cm$ had an extremely high failure rate.
Journal of Advanced Marine Engineering and Technology
/
v.39
no.9
/
pp.911-917
/
2015
The objective of this work focuses on the analysis of injection rate and macroscopic spray behavior characteristics with injection pressures as well as combustion and exhaust emission characteristics with injection timing and injection pressure by using a common rail single-cylinder diesel engine. The injection rate was measured by applying the Bosch method, and macroscopic spray behavior characteristics were analyzed with a constant-volume vessel and a high-speed camera. In addition, combustion and emission characteristics were analyzed in a common-rail single-cylinder diesel engine with precise control of fuel injection timing and pressure. For injection pressures of 30MPa and 50MPa, the injection rate was higher at 50 MPa, and the spray development (penetration) was also higher in the same elapsed time. The peak in-cylinder pressure and rate of heat release showed a tendency to decline as injection timing was delayed, and the peak in-cylinder pressure and rate of heat release were slightly higher for higher injection pressures. Higher injection pressures also reduced the mean effective pressure, while the indicated mean effective pressure and torque increased as injection timing was delayed to TDC. Nitrogen oxides had a peak level at injection timings of $BTDC20^{\circ}$(30MPa) and $BTDC15^{\circ}$(50MPa); carbon monoxide emissions were reduced by delaying injection timing from $BTDC30^{\circ}$.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.