• The Korean Journal of Pain
• /
• 제29권3호
• /
• pp.197-201
• /
• 2016

Because of its anatomical location and function, the costotransverse (CTRV) joint can be a source of thoracic back pain. In this retrospective observational study, we evaluated the clinical effectiveness of the CTRV joint injection in thoracic back pain patients with suspected CTRV joint problems. We enrolled 20 thoracic back pain patients with localized tenderness that was provoked by the application of pressure on the affected CTRV joints. We injected it with 0.5 ml of a ropivacaine and triamcinolone mixture at each level. The mean pre-injection pain score decreased by 37.9% ($7.2{\pm}1.5$ to $4.5{\pm}1.7$, P < 0.001) two weeks after CTRV joint injection. In addition, 70% of patients reported an excellent or good level of satisfaction. We demonstrated that an ultrasound-guided injection of the CTRV joint reduced patients' pain scores and led to a high level of satisfaction at short-term follow-ups in patients with suspected CTRV joint problems.

• 기본간호학회지
• /
• 제25권4호
• /
• pp.231-239
• /
• 2018

Purpose: This study was done to understand nursing students' exposure of needlestick and sharp injuries (NSSI), level of anxiety as well as experience of practicing injection with human beings during Fundamentals of Nursing (FN) practice. Methods: Data consisted of self-report questionnaires completed by 571 nursing students who had completed an injection practice in FN. The questionnaire included questions on general characteristics, exposure to NSSI, experience of practicing injections with human beings, level of anxiety and other experiences. Data were analyzed using descriptive statistics and content analysis. Results: Of the students, 17.5% experienced NSSI and 83.2% performed invasive injection procedures in the FN practice. The level of anxiety was 4.62-6.46/10 points when injecting a classmate and 1.27-1.93/10 points when using manikins. The feeling most often reported was worried about making a mistake that could hurt my classmate (57.2%). Conclusion: Nursing students are exposed to NSSI and experience a high degree of anxiety in invasive injection practice. These results indicate that it is necessary to develop and implement standardized NSSI prevention and anxiety reduction programs in FN.

• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.57-64
• /
• 2010

Metal Injection Molding (MIM) is attractive because it produces consistent, complex-geometry components for high-volume, high-strength, and high-performance applications. Also MIM using in optical communication field, display field, and semi-conductor field is a cost-effective alternative to metal machining or investment casting parts. It offers tremendous single-step parts consolidation potential and design flexibility. The objective of this paper is to study the suitability of design, flow analysis, debinding and sinterin processes, and capability analysis. The suitable injection conditions were 0.5~1.5 second filling time, 11.0~12.5 MPa injection pressure derived from flow analysis. The gravity of the product is measured after debinding an sintering. The maximum and minimum gravity levels are 7.5939 and 7.5097. the average and standard deviation are 7.5579 and 0.0122; when converted into density, the figure stands at 98.154%. According to an analysis of overall capacity, PPM total, which refers to defect per million opportunities(DPMO), stands at 166,066.3 Z.Bench-the sum of defect rates exceeding the actual lowest and highest limits-is 0.97, which translates into the good quality rate of around 88.4% and the sigma level of 2.47.

• Molecules and Cells
• /
• 제22권2호
• /
• pp.189-197
• /
• 2006

Prolactin (PRL) is a pituitary hormone involved in various physiological processes, including lactation, mammary development, and immune function. To further investigate the in vivo and comparative endocrine roles of PRL, mouse PRL cDNA fused to the cytomegalovirus promoter, was introduced into muscle by direct injection. Previously we studied the function of rat PRL using the same protocol. PRL mRNA was detected in the muscle following injection by RT-PCR and subsequent Southern blot analysis. PRL was also detected and Western blot analysis revealed a relatively high level of serum PRL. In the pCMV-mPRL-injected female mice, the estrous cycle was extended, especially in diestrus stage and the uterus thickening that was shown in normal estrous stage was not observed. In the pCMV-mPRL-injected male mice, new blood vessels were first found at 5 weeks of age and fully developed blood vessels were found after 8 weeks in the testis. The number of Leydig cells increased within the testis and the testosterone level in serum was observed high. Finally, the number of white blood cells (WBCs) increased in the pCMV-mPRL-injected mice. The augmentation of WBCs persisted for at least 20 days after injection. When injection was combined with adrenalectomy, there was an even greater increase in number of WBCs, especially lymphocytes. This increase was returned normal by treatment with dexamethansone. Taken together, our data reveal that intramuscularly expressed mouse PRL influences reproductive functions in female, induces formation of new blood vessels in the testis, and augments WBC numbers. Of notice is that the Leydig cell proliferation with increased testosterone was conspicuously observed in the pCMV-mPRL-injected mice. These results also suggest subtle difference in function of PRL between mouse and rat species.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.380-380
• /
• 2010

Currently, organic light-emitting diodes (OLEDs) have been proven of their readiness for commercialization in terms of lifetime and efficiency. In accordance with emerging new technologies, enhancement of light efficiency and extension of application fields are required. Particularly inverted structures, in which electron injection occurs at bottom and hole injection on top, show crucial advantages due to their easy integration with Si-based driving circuits for active matrix OLED as well as large open area for brighter illumination. In order to get better performance and process reliability, usually a proper buffer layer for carrier injection is needed. In inverted top emission OLED, the buffer layer should protect underlying organic materials against destructive particles during the electrode deposition, in addition to increasing their efficiency by reducing carrier injection barrier. For hole injection layers, there are several requirements for the buffer layer, such as high transparency, high work function, and reasonable electrical conductivity. As a buffer material, a few kinds of transition metal oxides for inverted OLED applications have been successfully utilized aiming at efficient hole injection properties. Among them, we chose 2 nm of $WO_3$ between NPB [N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] and Au (or Al) films. The interfacial energy-level alignment and chemical reaction as a function of film coverage have been measured by using in-situ ultraviolet and X-ray photoelectron spectroscopy. It turned out that the $WO_3$ interlayer substantially reduces the hole injection barrier irrespective of the kind of electrode metals. It also avoids direct chemical interaction between NPB and metal atoms. This observation clearly validates the use of $WO_3$ interlayer as hole injection for inverted OLED applications.

• Preventive Nutrition and Food Science
• /
• 제1권1호
• /
• pp.69-74
• /
• 1996

Capsaicin(CAP) is a pungent ingredient of hot pepper that has been used as a spicy food additive, pre-servative, and medicine. In this study, the effect of CAP on L-ascorbic acid(AsA)level in various tissues as well as its urinary excretion. and drug-metabolizing enzyme activity in rats were investigated. Rats fed AsA-deficient diets for 17days were injected intraperitoneally with 1mg of CAP in 0.5ml of ethanol-Tween 80-saline(20 :10 : 70, v/v/v). Control rats received the equal volume of the same solution without CAP. Urine was collected for 3 day after the CAP injection, and after 5 days tissues were removed; their AsA contents were measured by high performance liquid chromatography combined with and electrochemical detector. In addition, hepatic microsomal ethoxyresorfin O-deethylase(EROD) activity as measured. Urinary AsA excretion changed significantly following CAP injection. One and two days after CAP injection, the urinary AsA increased 2-and 3-fold in the CAP injected group, compared to the control, but the contents of adrenal glands and brain were lower than those of the control Dehydroascorbic acid contents in adrenal glands of the CAP injected group were higher than that of the control These results suggested that a single large dose of CAP could temporarily cause the redistribution of AsA in tissues accompanying by its urinary excretion, by affecting probably a biological system including mixed function oxygenase system(MFOS)

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.269-274
• /
• 2001

This research covers the development of new technique for composite injection molding of high stiffness Sabot. An analysis of polymer resin is performed by means of making test specimen mold and doing test with accordance of ASTM test guidelines. Structural analysis and simulation of injection molding process are carried out in order not only to estimate but also to predict the characteristics of molding stresses what both product and structure of mold may have. For structural analysis software, Moldflow and LS-dyna are used and universal test machine is utilized for evaluating performance of sabot. Cases of adopting this material to sabot are not announced yet in domestic academic world. In addition to that, materials for polymer-metal mixed injection molding are imported on the whole due to deficient level of domestic technology. Therefore, this new developed injection molding technique using PEI material can make it available to ensure the technology of making mold, injection and design. Finally, this technique may be applicable to another sabot having different radius of warheads from now on.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.1-8
• /
• 2020

In this study, the optimal design of the multi-cavity mold layout and packing pressure for the automobile TCU connector cover is determined based on the injection molding analysis and the desirability function method for multi-characteristic optimization. The design characteristics to be optimized are the warpage and sink marks of the product, the scrap of the feed system, and the clamping force. The optimal design is determined by performing injection molding analysis and desirability analysis for design alternatives defined by a complete combination of five mold layouts and six-level packing pressure. The optimal design shows that the desirability values for individual characteristics are quite high and balanced, and the resulting values of individual characteristics are satisfactorily low.

• 폴리머
• /
• 제35권1호
• /
• pp.1-6
• /
• 2011

사출성형은 고온의 수지를 고압으로 금형에 충전하고 냉각하여 제품을 만드는 공정으로 큰 온도차이와 고압에 의해 성형품에 잔류응력이 형성된다. 이러한 잔류응력은 시간이 지남에 따라 이완되면서 제품에 변형을 일으켜 형상 품질을 저하시킨다. 본 연구에서는 광탄성 장치를 이용하여 투명한 사출성형품의 잔류응력을 측정하는 방법을 연구하였다. 빛은 전자파처럼 진행하는데 편광필름을 통과하면 하나의 파장만이 진행하게 된다. 그 파장이 시편을 통과하면서 시편에 존재하는 잔류응력 때문에 복굴절이 형성되고 두 번째 편광필름을 통과하면서 다양한 색의 패턴을 보이게 된다. 이 색의 패턴을 이용하여 사출성형으로 제작된 사각평판의 잔류응력을 정량적으로 측정하였다. 또한 컴퓨터 해석을 통해 사출성형품의 광학적 특성을 예측하였으며 실험과 비교하였다.

• Nuclear Engineering and Technology
• /
• 제31권5호
• /
• pp.476-485
• /
• 1999

In order to evaluate the gravity-injection capability to maintain core cooling after a loss-of-shutdown-cooling event during shutdown operation, the plant conditions of the Yong Gwang Units 3&4 were reviewed. The six cases of possible gravity-injection paths from the refueling water tank (RWT) were identified and the thermal-hydraulic analyses were performed using the RELAP5/MOD3.2 code. The core cooling capability was significantly dependent on the gravity-injection path, the RCS opening, and the injection rate. In the cases with the pressurizer manway opening higher than the RWT water level, the coolant was held up in the pressurizer and the system pressure continued increasing after gravity-injection. The gravity injection eventually stopped due to the high system pressure and the core was uncovered. In the cases with the injection path and opening on the same leg side, the core cooling was dependent on whether the water injected from the RWT passed the core region or not. However, in the cases with the injection path and opening on the different leg side, the system was well depressurized after gravity-injection and the core boiling was successfully prevented for a long-term transient. In addition, from the sensitivity study on the gravity-injection flow rate, it was found that about 54 kg/s of injection rate was required to maintain the core cooling and the core cooling could be provided for about 10.6 hours after event with that injection rate from the RWT. Those analysis results would provide useful information to operators coping with the event.