• 한국광학회지
• /
• 제28권1호
• /
• pp.16-21
• /
• 2017

고광도 섬광에 의하여 사람 눈에 미치는 영향을 체계적으로 이해하는 것은 고섬광의 사용상에나 눈의 보건의학적인 관점에서 큰 가치가 있다. 본 논문에서는 고섬광의 안전지표로서 노출제한거리를 제안하고, 섬광의 특성으로부터 노출제한 노출제한거리를 구하는 방법을 제시한다. 본 연구에서 고려한 고섬광에 대한 노출제한을 결정하는 요인은 망막에서 투영되는 열적 에너지이며 이는 망막의 열적위험을 나타내는 열적유효복사휘도로 표현된다. 고섬광의 노출제한거리는 열적 유효복사휘도 또는 광도와 광원 반경에 거의 비례하나 지속시간에는 거의 의존하지 않는다. 고섬광의 노출제한거리가 지속시간에 비례하지 않는다는 점은 눈에 미치는 영향이 노출되는 시간에 비례할 것이라는 기대와는 다른 중요한 발견으로 생각된다. 본 연구에서 제안된 노출제한거리는 고섬광의 연구개발과 활용에서 뿐만 아니라 눈을 보호하는 보건의학 분야에서도 안전지표로서 중요하게 활용될 것으로 기대된다.

• 대한기계학회논문집B
• /
• 제40권5호
• /
• pp.283-288
• /
• 2016

목표 대상을 치명적이거나 파괴하지 않고 제압할 수 있는 무기를 비살상무기라 하며, 그중 고섬광발생장치는 강한 섬광으로 적의 광학센서를 무력화시키거나 시력을 일시적으로 마비시키는 무기체계이다. 본 연구에서는 고폭화약에 의한 충격파로 인해 발생한 플라즈마를 이용한 폭발형 고섬광발생장치의 형상에 대한 설계 방안을 도출하여 시료를 제작하고 광학센서를 사용한 기초시험을 수행하였다. 또한, 시험결과를 분석하여 설계 변수에 따른 고섬광 효과를 최대화시키는 방안을 도출하고자 한다. 충전가스 종류로 아르곤보다 제논의 경우 2배 가량 광도가 높게 나타났으며, 비활성가스가 광도에 미치는 영향을 알아보기 위한 비교로써 공기보다 제논의 경우 4배 가량 광도가 높게 나타났다. 또한, 화약량이 증가할수록 원주방향으로 전달되는 충격파가 도달할 수 있는 단면적이 증가할수록 광도가 증가함을 알 수 있었으며, 단일기폭보다 이중기폭의 경우 광원이 2배가 되어 광도도 2배됨을 입증하였다.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1225-1230
• /
• 2016

Since a flash light produces enormous amount of photon energy in short time, not only electro-optic and infrared(EO/IR) systems utilized for Intelligence Surveillance Target Acquisition and reconnaissance(ISTAR) activities but also the people of a combat field can be severely influenced by a high flash light bursting in front of them. The people who bumped into a flash could not escape such enormous amount of photon energy, resulting in being blind temporarily or even permanently. In order to investigate the effect of a high flash source on a human eye, it is essential to know how much photon energy be incident into an eye from the flash source. In this paper, the model of irradiated photon energy to individuals from some flashes is proposed. The proposed irradiated photon energy per unit area of retina is based on taking the situation to be modeled as a simple EO system in front of a flash light. The validity of proposed model was proved by the application of the model to human on the surface of the earth with the well known light source, the Sun. The model of this study can be utilized to simulate the retinal intensity and energy of a flash for various conditions such as the illumination levels, the distance from a flash busting site, luminous intensity and time of a flash.

• 한국농공학회논문집
• /
• 제65권3호
• /
• pp.57-67
• /
• 2023

A flash drought is a rapid-onset drought that develops over a short period of time as weather and environmental factors change rapidly, unlike general droughts, due to meteorological abnormalities. Abnormally high evapotranspiration rates and rapid declines in soil moisture increase vegetation stress. In addition, crop yields may decrease due to flash droughts during crop growth and may damage agricultural and economic ecosystems. In this study, Flash Drought Intensity Index (FDII) based on soil moisture data from Gravity Recovery Climate Experiment (GRACE) was used to analyze flash drought. FDII, which is calculated using soil moisture percentile, is expressed by multiplying two factors: the rate of intensification and the drought severity. FDII was developed for domestic flash drought events from 2014 to 2018. The flash drought that occurred in 2018, Chungcheongbuk-do showed the highest FDII. FDII was higher in heat wave flash drought than in precipitation deficit flash drought. The results of this study show that FDII is reliable flash drought analysis tool and can be applied to quantitatively analyze the characteristics of flash drought in South Korea.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.138-138
• /
• 2021

Flash floods are one of the types of natural hazards which has severe consequences. Flash floods cause high mortality, about 5,000 deaths a year worldwide. Flash floods usually occur in mountainous areas in conditions where the soil is highly saturated and also when heavy rainfall happens in a short period of time. The magnitude of a flash flood depends on several natural and human factors, including: rainfall duration and intensity, antecedent soil moisture conditions, land cover, soil type, watershed characteristics, land use. Among these rainfall intensity and antecedent soil moisture, play the most important roles, respectively. Flash Flood Guidance is the amount of rainfall of a given duration over a small stream basin needed to create minor flooding (bank-full) conditions at the outlet of the stream basin. In this study, the Sejong University Rainfall-Runoff model (SURR model) was used to calculate soil moisture along with FFG in order to identify flash flood events for the Geum basin. The division of Geum river basin led to 177 head-water catchments, with an average of 38 km². the soil moisture of head-water catchments is considered the same as sub-basin. The study has measured the threshold of flash flood generation by GIUH method. Finally, the flash flood events were used for verification of FFG. The results of the validation of seven past independent events of flash flood events are very satisfying.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.366-366
• /
• 2020

The drought is one of the extreme natural disasters observed in any climate zone and it is due to the deficiency in moisture. The flash drought is identified recently as a subdivision of drought and it is an extreme event distinguished by sudden onset and rapid intensification of drought conditions with severe impacts. The main cause for the flash drought is coupled situation due to precipitation deficit and high evapotranspiration. Hence, heat waves plays major role in identification of flash drought. Therefore, this study focused on identifying changes in distribution of heat waves for Korean Peninsula. The daily maximum and minimum temperature data were used in this study. The heat wave, heat wave intensity and heat wave intensity index were derived. The results of the study would be an input for the future studies on identification of flash drought in Korean Peninsula.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.380-385
• /
• 2000

In this study, geometric shape and crack in welded interface of the air cooled heat exchanger Fin-Tube of Dissimilar Meterials was analysed. The object of study is to understand the behavior of Stress Intensity Factor for fin length, flash thickness, flash length, symmetric and asymmetric cracks of comming from the manufacturing process. Stress Intensity Factor was analysed by BEM. Kelvin's solution was used as a fundamental solution in BEM analysis and stress extrapolation method was used to determine Stress Intensity Factor.

• 한국식품영양학회지
• /
• 제11권3호
• /
• pp.267-271
• /
• 1998

Seyferth 시약인 phenyl(tribromomethyl) mercury 및 diazomethane의 식품보존제인 dehydroacetic acid 및 coumarin과의 발암성과 그 반응기작을 분자 구조적 관점에서 알아보기 위하여 UV/vis 조건과 laser flash photolysis 시켰을 때의 결과는 다음과 같다. 1. Diazomethane과 Phenyl(tribromomethyl) mercury와 dehydroacetic acid와 diazomethane과의 반응은 광화학적 분해 반응에서 생성된 : CBr2와 : CH2 카르벤 중간체의 이탈기 효과에 따라 발암성이 크게 나타났다. 2. laser flash photolysis 상에서 반응시켰을 때 식품보존제의 발암성이 UV/vis 상에서의 photolysis 때보다 크게 나타났다.

• 한국분무공학회지
• /
• 제29권2호
• /
• pp.91-97
• /
• 2024

When investigating the droplet, spray, and impact of liquid on a solid plate, backlight imaging has been widely used to understand these phenomena. However, some previous studies have suffered from poor image quality. In this study, various combinations of image processing algorithms, such as white image correction, histogram equalization, CLAHE, Otsu's binarization, and multi-Otsu's binarization, have been applied to flash boiling spray images to enhance image quality for qualitative observation and semi-quantitative spray angle evaluation. To acquire images with high contrast for qualitative observation, applying CLAHE was effective, making small droplets and detailed shapes of the jet noticeable. However, when images were averaged to determine spray angle or penetration length based on intensity, this method induced artifact unphysical patterns, thus requiring careful consideration. Based on the algorithm proposed in this study, the spray angle variation according to injection pressure and temperature has been calculated, showing a reasonable trend.

• 국제학술발표논문집
• /
• The 1th International Conference on Construction Engineering and Project Management
• /
• pp.539-543
• /
• 2005

The research presented in this paper enables real-time 3D modeling to help make construction processes ultimately faster, more predictable and safer. Initial research efforts used an emerging sensor technology and proved its usefulness in the acquisition of range information for the detection and efficient representation of static and moving objects. Based on the time-of-flight principle, the sensor acquires range and intensity information of each image pixel within the entire sensor's field-of-view in real-time with frequencies of up to 30 Hz. However, real-time working range data processing algorithms need to be developed to rapidly process range information into meaningful 3D computer models. This research ultimately focuses on the application of safer heavy equipment operation. The paper compares (a) a previous research effort in convex hull modeling using sparse range point clouds from a single laser beam range finder, to (b) high-frame rate update Flash LADAR (Laser Detection and Ranging) scanning for complete scene modeling. The presented research will demonstrate if the FlashLADAR technology can play an important role in real-time modeling of infrastructure assets in the near future.