• 대한금속재료학회지
• /
• 제56권11호
• /
• pp.835-843
• /
• 2018

In this work, we report a delta rosette strain sensor based on highly stretchable silver nanowire (AgNW) percolation piezoresistors. The proposed rosette strain sensors were easily prepared by a facile two-step fabrication route. First, three identical AgNW piezoresistive electrodes were patterned in a simple and precise manner on a donor film using a solution-processed drop-coating of the AgNWs in conjunction with a tape-type shadow mask. The patterned AgNW electrodes were then entirely transferred to an elastomeric substrate while embedding them in the polymer matrix. The fabricated stretchable AgNW piezoresistors could be operated at up to 20% strain without electrical or mechanical failure, showing a maximum gauge factor as high as 5.3, low hysteresis, and high linearity ($r^2{\approx}0.996$). Moreover, the sensor responses were also found to be highly stable and reversible even under repeated strain loading/unloading for up to 1000 cycles at a maximum tensile strain of 20%, mainly due to the mechanical stability of the AgNW/elastomer composites. In addition, both the magnitude and direction of the principal strain could be precisely characterized by configuring three identical AgNW piezoresistors in a delta rosette form, representing the potential for employing the devices as a multidimensional strain sensor in various practical applications.

• 반도체디스플레이기술학회지
• /
• 제17권2호
• /
• pp.1-5
• /
• 2018

Elastic resistive pressure sensor is fabricated by a direct spray coating of silver nanowires (AgNWs) on uncured polydimethylsiloxane (PDMS) and an additional coating of a conductive polymer, poly(3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT:PSS). To improve the sensitive and stability, we have fabricated sandwich-structured AgNW/polymer sensor where two AgNW/polymer-coated PDMS films are laminated with the conducting surfaces contacted by pressure lamination. It shows a resistance decrease upon loading due to the formation of dense network of AgNWs. It is demonstrated that the sandwich-structured AgNW/polymer sensor exhibits very high sensitivity ($2.59kPa^{-1}$) and gauge factor (37.8) in the low pressure regime. It can also detect a subtle placement and removal of a weight as low as 3.4 mg, the corresponding pressure of which is about 5.4 Pa. It is shown that the protrusion of AgNWs from PDMS is suppressed substantially by the over-coated PEDOT:PSS layer, thereby reducing hysteresis and rendering the sensor more stable.

• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.116-130
• /
• 2019

This study investigates passenger-authored online reviews of airline services using social network analysis to compare the differences in customer perceptions between full service carriers (FSCs) and low cost carriers (LCCs). While deriving words with high frequency and weight matrix based on the text analysis for FSCs and LCCs respectively, we analyze the semantic network (betweenness centrality, eigenvector centrality, degree centrality) to compare the degree of connection between words in online reviews of each airline types using the social network analysis. Then we compare the words with high frequency and the connection degree to gauge their influences in the network. Moreover, we group eight clusters for FSCs and LCCs using the convergence of iterated correlations (CONCOR) analysis. Using the resultant clusters, we match the clusters to dimensions of two types of service quality models ($Gr{\ddot{o}}nroos$, Brady & Cronin (B&C)) to compare the airline service quality and determine which model fits better. From the semantic network analysis, FSCs are mainly related to inflight service words and LCCs are primarily related to the ground service words. The CONCOR analysis reveals that FSCs are mainly related to the dimension of outcome quality in $Gr{\ddot{o}}nroos$ model, but evenly distributed to the dimensions in B&C model. On the other hand, LCCs are primarily related to the dimensions of process quality in both $Gr{\ddot{o}}nroos$ and B&C models. From the CONCOR analysis, we also observe that B&C model fits better than $Gr{\ddot{o}}nroos$ model for the airline service because the former model can capture passenger perceptions more specifically than the latter model can.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권1호
• /
• pp.40-44
• /
• 2019

This study investigates mixtures of water and cryoprotectant agents (CPAs) to store high-grade cold energy. Although water is an ideal material for a cold thermal storage (CTS) due to its high specific heat, undesirable volume expansion may cause structural stresses during freezing. The volume expansion can be alleviated by adding the CPAs to water. However, the CPA aqueous solutions not only have different thermal properties but also transit to amorphous state different from pure water. Therefore, these characteristics should be considered when using them as material of the CTS. In experiments, glycerol and dimethyl sulfoxide (DMSO) are selected as the candidate CPA. The volume expansion of the solution is measured by an in-situ strain gauge in low temperature region. The specific heat capacity of the solution is also measured by differential scanning calorimetry (DSC). Both the amount of volume expansion and the specific heat capacity of the CPA aqueous solution decrease in the case of higher concentration of CPA. These characteristics should be contemplated to select optimal aqueous solution for CTS for liquid air energy storage system (LAES). The CPA solutions have advantages of having wide temperature range to utilize the latent heat of water and higher sensible heat of the CPA. The CPA solutions which can satisfy the allowable stress of the structure are determined. Consequently, among the CPA solutions investigated, DMSO 20% w/w solution is the most suitable for the CTS.

• 한국정보통신학회논문지
• /
• 제23권11호
• /
• pp.1364-1370
• /
• 2019

건축물이나 교량, 터널과 같은 구조물의 붕괴를 측정하기 위하여 기울기 센서를 사용하고 있으며 최근에는 사용성이 편리하고 가격이 저렴하여 MEMS(Micro-Electro-Mechanical System) 센서를 사용한 기울기 센서를 많이 사용하고 있으나 측정 범위가 한정되어 있어 360도 전 방위에 대해 고정밀도를 가지지는 못하고 있다. 이것은 MEMS 센서가 갖는 오프셋과 스케일 오차 때문이다. 본 논문에서는 MEMS 센서가 갖는 기계적 오차를 줄이기 위하여 정밀도가 높은 각도 계산을 위한 알고리즘을 제시하였고 MEMS 센서 모듈과 전송 모듈을 제작하여 교정 전 센서 모듈의 각도 정확도와 교정 후 각도 측정 정확도를 비교하여 교정 알고리즘의 효과를 제시하였으며, 실험 결과 제안 기술을 적용하였을 때 360도 전 방위에 대해 ±0.015도의 정밀도를 가짐을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제31권1호
• /
• pp.1-6
• /
• 2024

거미는 진동감각기관을 통하여 미세한 진동까지도 감지해낸다. 뛰어난 진동 감지 능력을 활용해 먹이나 포식자가 발생시키는 진동을 감지하여 공격을 계획하거나 위협을 파악하며 생존에 활용한다. 본 논문은 거미의 진동감각기관을 모사하여 개발된 초민감 진동압력센서에 대해 기술한다. 거미가 진동을 감지하는데 사용하는 감각기관에 위치한 작은 틈에 착안하여 센서에 균열을 생성하였고, 균열의 깊이를 제어하여 외부로부터 오는 압력이나 진동을 매우 민감하게 감지할 수 있는 센서를 개발하였다. 이 센서는 10 N의 인장응력을 적용하여 2%의 변형률에서 게이지 계수가 16000에 도달한다. 이는 높은 신호대잡음비를 가져 정확하게 원하는 진동을 인식할 수 있는 소자로서 외력(압력, 진동)과 생체 신호측정 등 다양한 평가를 통해 센서의 높은 민감도를 증명하였다. 이를 통하여 생체모사 기술을 활용한 새로운 센서의 개발 및 다양한 산업 분야로의 응용 가능성을 제시한다.

• Clinical Endoscopy
• /
• 제57권1호
• /
• pp.89-95
• /
• 2024

Background/Aims: In stereomicroscopic sample isolation processing, the cutoff value (≥4 mm) of stereomicroscopically visible white cores indicates high diagnostic sensitivity. We aimed to evaluate endoscopic ultrasound-guided tissue acquisition (EUS-TA) using a simplified stereomicroscopic on-site evaluation of upper gastrointestinal subepithelial lesions (SELs). Methods: In this multicenter prospective trial, we performed EUS-TA using a 22-gauge Franseen needle in 34 participants with SELs derived from the upper gastrointestinal muscularis propria, requiring pathological diagnosis. The presence of stereomicroscopically visible white core (SVWC) in each specimen was assessed using stereomicroscopic on-site evaluation. The primary outcome was EUS-TA's diagnostic sensitivity with stereomicroscopic on-site evaluation based on the SVWC cutoff value (≥4 mm) for malignant upper gastrointestinal SELs. Results: The total number of punctures was 68; 61 specimens (89.7%) contained stereomicroscopically visible white cores ≥4 mm in size. The final diagnoses were gastrointestinal stromal tumor, leiomyoma, and schwannoma in 76.5%, 14.7%, and 8.8% of the cases, respectively. The sensitivity of EUS-TA with stereomicroscopic on-site evaluation based on the SVWC cutoff value for malignant SELs was 100%. The per-lesion accuracy of histological diagnosis reached the highest level (100%) at the second puncture. Conclusions: Stereomicroscopic on-site evaluation showed high diagnostic sensitivity and could be a new method for diagnosing upper gastrointestinal SELs using EUS-TA.

• 한국해안·해양공학회논문집
• /
• 제32권2호
• /
• pp.135-145
• /
• 2020

해양에서의 파랑관측은 부이나 압력계 등을 이용하여 수면변위를 관측하는 직접관측방법과 Radar를 이용하여 관측하는 원격관측방법으로 구분된다. 직접관측방법은 정확도가 높지만, 악기상 시 파손 및 유실 위험이 크며 외해 설치 시 많은 유지 보수비용이 필요하다는 단점을 가지고 있다. 반면 Radar와 같은 원격관측방법은 장비를 육지에 계류하여 유지관리가 용이하지만 직접관측방법과 비교하면 정확도가 다소 낮은 단점이 있다. 본 연구에서는 원격파랑관측자료의 품질을 개선하기 위해 독도에 설치되어 운영 중인 MIROS Wave and Current Radar(MWR) 관측자료의 수집 및 분석을 하였으며, 이를 기상청에서 운영 중인 해양파고부이(CWB)의 관측자료와 비교하였다. 그리고 MWR 관측자료의 품질을 개선하기 위해 1) MIROS사에서 개발한 필터(Reduce Noise Frequency, Phillips Check, Energy Level Check)의 복합적인 사용(최적필터; Optimal Filter), 2) OOI(Ocean Observatories Initiative)에서 개발한 Spike Test 알고리즘(Spike Test) 그리고 3) 유의파고-주기 관계식을 이용한 새로운 필터(H-Ts QC)를 사용하여 신뢰도가 낮은 이상자료(Noise; 시계열 자료 중 급격하게 자료가 발산하여 정상자료가 아닌 것으로 판단되는 자료)의 제거 및 보정을 수행하였다. 결과적으로 3가지의 품질관리기법을 적용한 MWR의 파랑관측자료는 유의파고에 대해서는 일정 부분 신뢰도를 가지지만 유의파주기에서는 여전히 오차가 존재하며 이에 대한 개선이 요구된다. 또한, MWR의 파랑관측자료는 3 m 이상의 고파랑에서는 CWB와 다소 양상이 달라지는 한계가 발생하므로 이를 위한 장기간의 원격파랑관측 자료의 수집과 분석, 그리고 필터 개발 등에 관한 지속적인 연구가 필요하다.

• 한국강구조학회 논문집
• /
• 제27권2호
• /
• pp.251-260
• /
• 2015

단부판 접합부는 다양한 형태로 보-기둥 모멘트 접합부에 적용되고 있다. 이러한 단부판 접합부는 단부판의 두께 및 길이, 고장력 볼트의 개수 및 직경, 고장력볼트의 게이지 거리, 고장력볼트의 지레작용력, 용접부의 치수 및 길이 등에 따라서 상이한 거동특성, 강성 및 강도, 에너지소산능력의 변화를 나타낸다. 따라서 이 연구는 단부판의 두께 변화에 따른 인장측에 체결된 고장력볼트의 지레작용력 및 축방향 인장강성을 파악하고, 단부판의 거동특성에 영향을 미치는 이러한 변수들을 예측하기 위한 해석모델을 제안하기 위하여 진행하였다. 이를 위하여 이 연구에서는 단부판의 두께만을 변수로 선택하여 비보강 확장단부판 접합부에 대한 3차원 비선형 유한요소해석을 수행하였다.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.406-413
• /
• 2023

This study used optical and scanning electron microscopy to analyze the surface oxidation phenomenon that accompanies a γ'-precipitate free zone in a directional solidified CM247LC high temperature creep specimen. Surface oxidation occurs on nickel-based superalloy gas turbine blades due to high temperature during use. Among the superalloy components, Al and Cr are greatly affected by diffusion and movement, and Al is a major component of the surface oxidation products. This out-diffusion of Al was accompanied by γ' (Ni₃Al) deficiency in the matrix, and formed a γ'-precipitate free zone at the boundary of the surface oxide layer. Among the components of CM247LC, Cr and Al related to surface oxidation consist of 8 % and 5.6 %, respectively. When Al, the main component of the γ' precipitation phase, diffused out to the surface, a high content of Cr was observed in these PFZs. This is because the PFZ is made of a high Cr γ phase. Surface oxidation of DS CM247LC was observed in high temperature creep specimens, and γ'-rafting occurred due to stress applied to the creep specimens. However, the stress states applied to the grip and gauge length of the creep specimen were different, and accordingly, different γ'-rafting patterns were observed. Such surface oxidation and PFZ and γ'-rafting are shown to affect CM247LC creep lifetime. Mapping the microstructure and composition of major components such as Al and Cr and their role in surface oxidation, revealed in this study, will be utilized in the development of alloys to improve creep life.