• Journal of Power Electronics
• /
• v.13 no.2
• /
• pp.197-205
• /
• 2013

In energy injection resonant AC-AC converters, due to the low frequency effect of the AC input envelope and the low energy injection losses requirement, the constant and steady control of the high frequency AC output envelope is still a problem that has not been solved very well. With the aid of system modeling, this paper analyzes the mechanism of the envelope pit on the resonant AC current. The computing methods for the critical damping point, the falling time and the bottom value of the envelope pit are presented as well. Furthermore, this paper concludes the stability precondition of the system AC output. Accordingly, an optimal control method for the AC output envelope is put forward based on the envelope prediction model. This control method can predict system responses dynamically under different series of control decisions. In addition, this control method can select best series of control decisions to make the AC output envelope stable and constant. Simulation and experimental results for a contactless power transfer system verify the control method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.313-321
• /
• 2014

A low-power low-cost polar transmitter for EDGE is designed in $0.18{\mu}m$ CMOS. A differential delta-sigma modulator (DSM) tunes a three-terminal voltage-controlled oscillator (VCO) to perform RF phase modulation, where the VCO tuning curve is digitally pre-compensated for high linearity and the carrier frequency is calibrated by a dual-mode low-power frequency-locked loop (FLL). A digital intermediate-frequency (IF) pulse-width5 modulator (PWM) drives a complementary power-switch followed by an LC filter to achieve envelope modulation with high efficiency. The proposed transmitter with 9mW power dissipation relaxes the time alignment between the phase and envelope modulations, and achieves an error vector magnitude (EVM) of 4% and phase noise of -123dBc/Hz at 400kHz offset frequency.

• Phonetics and Speech Sciences
• /
• v.4 no.3
• /
• pp.119-125
• /
• 2012

This paper describes a new algorithm for encoding spectral shape and envelope in the generic mode of G.718 super-wide band (SWB). In the G.718 SWB coder, generic mode coding and sinusoidal enhancement are used for the quantization of modified discrete cosine transform (MDCT)-based parameters in the high frequency band. In the generic mode, the high frequency band is divided into sub-bands and for every sub-band the most similar match with the selected similarity criteria is searched from the coded and envelope normalized wideband content. In order to improve the quantization scheme in high frequency region of speech/audio signals, the modified generic mode by the improvement of the generic mode in G.718 SWB is proposed. In the proposed generic mode, perceptual vector quantization of spectral envelopes and the resolution increase for spectral copy are used. The performance of the proposed algorithm is evaluated in terms of objective quality. Experimental results show that the proposed algorithm increases the quality of sounds significantly.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.679-688
• /
• 2011

A new discrete-amplitude pulse width modulation (DAPWM) scheme for a high-efficiency linear power amplifier is proposed. A radio frequency (RF) input signal is divided into an envelope and a phase modulated carrier. The low-frequency envelope is modulated so that it can be represented by a pulse whose area is proportional to its amplitude. The modulated pulse has at least two different pulse amplitude levels in order that the duty ratios of the pulse are kept large for small input. Then, an RF pulse train is generated by mixing the modulated envelope with the phase modulated carrier. The RF pulse train is amplified by a switching-mode power amplifier, and the original RF input signal is restored by a band pass filter. Because duty ratios of the RF pulse train are kept large in spite of a small input envelope, the DAPWM technique can reduce loss from harmonic components. Furthermore, it reduces filtering efforts required to suppress harmonic components. Simulations show that the overall efficiency of the pulsed power amplifier with DAPWM is about 60.3% for a mobile WiMax signal. This is approximately a 73% increase compared to a pulsed power amplifier with PWM.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.413-422
• /
• 2022

In this paper, the fault analysis of the momentum wheel, which is a high-speed rotary machinery of 'Control Moment Gyro' for medium and large satellite, was described. For fault diagnosis, envelope spectrum analysis was performed using Hilbert transformation method and signal demodulation method to find the impact signals periodically generated from amplitude modulated signals. Through this, the fault of the momentum wheel was diagnosed by analyzing whether there was a harmonic component of the rotational frequency and a bearing fault frequency in a specific frequency band with a high peak.

• Wind and Structures
• /
• v.16 no.1
• /
• pp.61-91
• /
• 2013

An analytical model of internal pressure response of a leaky and quasi-statically flexible building with a dominant opening is provided by including the effect of the envelope external pressure fluctuations on the roof, in addition to the fluctuating external pressure at the dominant opening. Wind tunnel experiments involving a flexible roof and different building porosities were carried out to validate the analytical predictions. While the effect of envelope flexibility is shown to lower the Helmholtz frequency of the building volume-opening combination, the lowering of the resonant peak in the internal and net roof pressure coefficient spectra is attributed to the increased damping in the system due to inherent background leakage and envelope flexibility. The extent of the damping effects of "skin" flexibility and background leakage in moderating the internal and net pressure response under high wind conditions is quantified using the linearized admittance functions developed. Analytical examples provided for different combinations of background leakage and envelope flexibility show that alleviation of internal and net pressure fluctuations due to these factors by as much as 40 and 15% respectively is possible compared to that for a nominally sealed rigid building of the same internal volume and opening size.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.27-33
• /
• 2013

Helmet Mounted Display(HMD) has great advantages on the navigation and mission symbologies for the pilot's forward looking display and, therefore, has been remarkably drawing attention as the up coming display of the next generation aircraft. The essential technology to process the Line of Sight-Foward(LOS-F) data in real-time is to estimate exact helmet situation and position. In this paper, we research a acoustic helmet tracking technique. For the reason that mechanical acoustic noises might interfere with Helmet Tracking System(HTS) and unnecessary acoustic noises are inevitable when using acoustic technique, this approach has not been adapted. In order to overcome this problem. We propose that acoustic wave of which the wave length is longer than audio frequency and, especially, we used beating signal envelope which is composed of two close high frequency.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1771-1772
• /
• 2006

In this paper, we considered multiple faults detection on a coaxial cable through Time-Frequency Domain Reflectometry (TFDR). It is well known that TFDR has high resolution accuracy for detecting and estimating the fault detection on a coaxial cable. This approach was based on time-frequency signal analysis and utilized a chirp signal multiplied by a Gaussian time envelope. The Gaussian envelope provided time localization, while the chirp allowed one to excite the system interest. We carried out experiments with 10C-FBT coaxial cable having either one or two faults. The result shows TFDR can be extended to detect multiple faults with high accuracy on a coaxial cable.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.6
• /
• pp.381-387
• /
• 2010

Both timbral features and spatial features are important in the assessment of multichannel audio coding systems. The prediction model, extending the ITU-R Rec. BS. 1387-1 to multichannel audio coding systems, with the use of spatial features such as ITDDist (Interaural Time Difference Distortion), ILDDist (Interaural Level Difference Distortion), and IACCDist (InterAural Cross-correlation Coefficient Distortion) was proposed by Choi et al. In that model, ITDDistswere only computed for low frequency bands (below 1500Hz), and ILDDists were computed only for high frequency bands (over 2500Hz) according to classical duplex theory. However, in the high frequency range, information in temporal envelope is also important in spatial perception, especially in sound localization. A new model to compute the ITD distortions of temporal envelopes in high frequency components is introduced in this paper to investigate the role of such ITD on spatial perception quantitatively. The computed ITD distortions of temporal envelopes in high frequency components were highly correlated with perceived sound quality of multichannel audio sounds.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.197-204
• /
• 2013

In this paper, we propose a new method for artificial bandwidth extension of narrow-band signal in frequency domain. In the proposed method, a narrow-band signal is decomposed into excitation signal and spectral envelope, which are extended independently in frequency domain. The excitation signal is extended such that low-band harmonic structure is maintained in high band, and the spectral envelope is extended based on sub-band energy using NMF. Finally, the spectral phase is determined based on signal correlation between frames in time domain, resulting in the final wide-band signal. The subjective evaluation verified that the wide-band signal generated by the proposed method has a higher quality than the original narrow-band signal.