• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.88-91
• /
• 2003

Electromagnetic interference shielding and near-infrared cutoff filters for plasma display panel application were designed and fabricated by radio frequency magnetron sputtering. Three types of the filters were prepared: the basic structure of type A consisted of [$TiO_2$ Ti Ag $TiO_2$]; type B, of [$TiO_2$ ITO Ag $TiO_2$]; type C, of [$TiO_2$ ITO Ag ITO $TiO_2$]. Ti and ITO layers deposited on Ag layers were employed as barriers to prevent the oxidation and the diffusion of Ag film into the adjacent oxide layers. Optical, electrical, chemical, and structural properties were investigated, and the result shows that the filters with the ITO barrier layers provided an enhancement in transmittance in the visible owing to a lower absorption of ITO layers than Ti layers. Type C filter showed better optical and electrical performances and smoother surface roughness than Type B and C filters: the average sheet resistance was as low as 1.51 $\Omega\Box$ (where $\square$ stands for a square film), the peak transmittance in the visible was as high as 78.2 %, and the average surface roughness was 1.48 nm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.5
• /
• pp.845-851
• /
• 2008

A simple RMRAC (Robust Model Reference Adaptive Control) scheme for the PMSM (Permanent Magnent Synchronous Motor) is proposed in the synchronous frame. A current control of PMSM is the most inner loop of electro-mechanical driving systems and it requires a fast and simple control law to play a foundation role in the control hierarchy. In the proposed synchronous current model, the input signal is composed of a calculated voltage by proposed adaptive laws and real system disturbance. The gains of feed-forward and feedback controllers are estimated by the proposed modified Gradient method respectively, where the system disturbances are assumed as filtered current tracking errors. After the estimation of the system disturbances from the tracking errors, the corresponding voltage is fed forward to control input voltage to compensate for the disturbances. The proposed method is robust against high frequency disturbance and has a fast dynamic response. It also shows a good real-time performance due to it's simplicity of control structure. Through the simulations and real experiments, efficiency of the proposed method is verified.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.538-548
• /
• 2003

We studied effects by Re$_2$O$_3$(R=Dy, Gd, Ho) addition on the properties of Mn-Zn ferrite. The doping concentration range from 0.05 wt% to 0.25 wt%. All samples were prepared by standard fabrication of ceramics. With increasing the rare earth oxides, specific density and initial permeability increased on the whole. But, the tendencies such as upper result had the measured value on limitation and characteristics saturated or decreased properties after that. In case of excessive addition of additive beyond some level, initial permeability properties of ferrite have gone down in spite of anomalous grain. With increasing the content of additive, both the real and imaginary component of complex permeability and the magnetic loss (tan$\delta$) increased. Because the increased rate of real component had higher than imaginary component, magnetic loss increased none the less for increasing the real component related with magnetic permeability. But, the magnetic loss of ferrite doped with the rare earth oxides was lower than that of Mn-Zn ferrite at any rate. The small amount of present rare earth oxides in Mn-Zn ferrite composition led to enhancement of resistivity in bulk, and more so in the grain boundary. It was seem to be due to the formation of mutual reaction such as between iron ions and rare earth element ions.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.143-148
• /
• 1999

This study was conducted to elucidate the effects of ascorbic acid and dehydroascorbic acid on somatic embryogenesis from the cultured cells of carrot. Ascorbic acid in culture medium merely stimulated the proliferation of non-embryogenic cells but dehydroascorbic acid in medium induced embryogenic cells from non-embryogenic cells accompanying the inhibition of cell proliferation. Ascorbic acid in medium inhibited somatic embryogenesis from embryogenic cells while dehydroascorbic acid in medium enhanced somatic embryogenesis from the cells as well as non-embryogenic cells. This enhancement was limited to globular embryos and the maturation to cotyledonary embryos was inhibited by dehydroascorbic acid treatment. From the above results it is suggested that carrot callus cultures on medium containing dehydroascorbic acid could quickly induce embryogenic cells. In addition after brief culture of embryogenic cells on development medium containing dehydroascorbic there by acid the subculture of the cells to MS basal medium resulted in the high frequency production of somatic embryos.

• Korean Journal of Materials Research
• /
• v.13 no.4
• /
• pp.271-278
• /
• 2003

Conventional backlight for liquid crystal display (LCD) uses mercury which leads to environmental pollution. In this study, characteristics of AC coplanar type mercury-free plasma flat lamp have been studied. Pollution-free Xe-He is adopted as a discharge gas system. Since the Xe gas has a lower efficiency in generating vacuum ultraviolet (VUV) than mercury, the improvement of luminance and luminous efficiency in the Xe gas system is very important. The electrode, dielectric, and phosphor layers constituting lamp are formed on the bottom glass by the screen printing method. The effects of pulse shape, on-time, and pulse frequency on the luminance and luminous efficiency have been examined. For Xe(5%)-He gas, the lamp exhibits higher efficiency with sharper pulse shape, higher peak voltage, and shorter pulse on-time (up to 2 $\mu\textrm{s}$). Higher efficiency and lower consumption of power were obtained at 30 kHz than at 60 kHz. The collision of ion to bottom electrodes is a dominant factor to raise the lamp temperature. Therefore the high voltage and low current discharge system is necessary for reduction of the lamp temperature as well as for enhancement of the luminous efficiency.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.11
• /
• pp.963-971
• /
• 2000

In order to investigate the effects of an electric field on EHD(Electro-hydrodynamic) nucleate boiling hat transfer characteristics in a nonuniform electric field under saturated pool boiling, the basic study has been performed experimentally. In the present study, the working fluid is R-113 and the plate-wire electrode system is used to generate a steep electric field gradient. Boiling parameters are investigated by using a high speed camera. The electric field distribution around a wire is obtained to understand the effect of an electric field on bubble departure/movement. The experimental results show EHD effects are much more considerable when the applied voltage increases. Bubbles depart away from the heated wire in radial direction. It is confirmed that the mechanisms of EHD nucleate boiling are closely connected with the dynamic behavior of bubbles. The boiling parameters are significantly changed by the electric field strength. With increasing applied voltages, the bubble size decreases and the nucleation site density, bubble velocity and bubble frequency increase.

• Journal of the Korean housing association
• /
• v.4 no.2
• /
• pp.33-43
• /
• 1993

The purpose of this study is to support satisfaction for reasonable management method to elevate the enhancement of management attitude and the satisfaction of management state for Multi-family Housing. This study was intended to find out variables which influence on the satifaction and attitude of resident to the management of Apartment, and to investigate variables influencing on the satisfaction and attitude of resident to the management of Apartment. In this study, survey research method is employed. The sample is taken from 336 APT. resident's living in Seoul, from 13th of Sep. to 20th of Sep, in 1993. Used statistica] method are Frequency, Percentage, 1-test, One-way Anova, Duncan-test, Multip]e Regression. The major finding were as follows: 1) The work of management of Multi-family Housing was classified into three type ; a)administration management b) maintenance management c) community-life control. 2) The management attitude of Apartment inhabitant is very high, especially .the attitude of maintenance management is the higest. But they disagree with the raise of management cost necessary to maintenance management. 3) The satisfaction of administration management, maintenance management, community-life control management is all low in the management condition of Apartment.'1'he management method of present Apartment shows a little problem.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.77-78
• /
• 2015

Image Binarization is essential process in the digital image processing for the read out of a one-dimensional barcode. Local threshold method is suitable for binarization of a bar code. However, It has problem that processing time is slower than other binarization algorithm. Also, It's results not appropriate If the image has a noise. In this paper, we propose the modification method for solve these problems. Proposed algorithm help to improve the speed of local thresholding method using average image. Also, we proposed a high frequency filter to one-dimensional barcode for improvement quality of binary image.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.67-69
• /
• 2007

PMSM (Permanent Magnet Synchronous Motor) current control is a most inner loop of electromechanical driving systems and it plays a foundation role in the hierarchy's control loop of several mechanical machine systems. In this paper, a simple RMRAC control scheme for the PMSM is proposed in the synchronous frame. In the synchronous current model, the input signal is composed of as a calculated voltage by adaptive laws and system disturbances. The gains of feed-forward and feed-back controller are estimated by the proposed e-modification methods respectively, where the disturbances are assumed as filtered current tracking errors. After the estimation of the disturbances from the tracking errors, the corresponding voltage is fed forward to control input to compensate for the disturbances. The proposed method is robust to high frequency disturbances and has a fast dynamic response to time varying reference current trajectory. It also shows a good real-time performance duo to it's simplicity of control structure. Through the simulations considering several cases of external disturbances and experimental results, efficiency of the proposed method is verified

• Speech Sciences
• /
• v.11 no.4
• /
• pp.199-206
• /
• 2004

This paper attempts to provide a substantial explanation of different prosodic implementations on segments in English and Spanish, arguing that the phonetic modification invoked by prosody may effectively reflect phonological structure. In English, a high front vowel in accented syllables is acoustically realized as higher F1 and F2 frequencies than in unaccented syllables, due to its more peripheral and sonorous articulation (Harrington et al. 1999). In this paper, an acoustic experiment was conducted to see if such a manner of segmental modification invoked by prosody in English extends to other languages such as Spanish. Results show that relatively more prominent syllables entail higher F1 values as a result of their more sonorous articulation in Spanish, but either front or back vowel does not show a higher F2 or a lower F2 frequency. This is interpreted as an indication that a prosodically prominent syllable entails its vocalic enhancement in both horizontal and vertical dimensions of articulation in English. In Spanish, however, only the vertical dimensional articulation is maximized, resulting in a higher F1. I suggest that this difference may be attributed to the different phonological structures of vowels in English and Spanish, and that sonority expansion alone would be sufficient in the articulation of prosodic prominence as long as the phonological distinction of vowels is well retained.