• 복합신소재구조학회 논문집
• /
• 제6권1호
• /
• pp.38-44
• /
• 2015

In this paper, a finite element dynamic simulation study was performed to gain an insight about the blast wall test details for the offshore structures. The simulation was verified using qualitative and quantitative comparisons for different materials. Based on in-depth examination of blast simulation recordings, dynamic behaviors occurred in the blast wall against the explosion are determined. Subsequent simulation results present that the blast wall made of high energy absorbing high manganese steel performs much better in the shock absorption. In this paper, the existing finite element shock analysis using the LS-DYNA program is further extended to study the blast wave response of the corrugated blast wall made of the high manganese steel considering strain rate effects. The numerical results for various parameters are verified by comparing different material models with dynamic effects occurred in the blast wall from the explosive simulation.

• 소성∙가공
• /
• 제25권2호
• /
• pp.124-129
• /
• 2016

Recently, global railway car makers are competing desperately in developing high-speed railway vehicles. Ensuring passenger safety during a crash is essential. The design and the manufacturing of energy absorbing components are becoming more and more important. A deformation tube is a typical passive energy absorbing component for railway cars. In the current study the slab method was used to predict the energy absorbing capability of a deformation tube during the early design stage. The usefulness of the prediction method is verified through the comparisons between the results of FE simulations and those of the prediction method.

• 한국지반환경공학회 논문집
• /
• 제10권6호
• /
• pp.49-60
• /
• 2009

본 연구는 기존의 낙석방지울타리에 적용되는 와이어로프를 경강선으로 대체하고 소재 및 체결부에 대한 실내성능실험과 더불어 현장에서의 수직낙하시험을 통해 전체적인 에너지 흡수능력을 평가하여 새로운 낙석방지울타리를 개발하는데 있다. 12단 경강선 적용 낙석방지울타리의 수직낙하시험 결과, 국내 낙석방지울타리에 기준으로 적용되는 흡수에너지인 50kJ 이상의 에너지를 흡수하는 것으로 나타났다. 또한 경강선 단수가 12단에서 16단으로 증가함에 따라 에너지 흡수능력도 향상되었다. 이러한 새로운 낙석방지울타리를 도로공사 절취사면 현장에 성공적으로 적용하였다. 그 결과, 시공성은 기존에 비해 별차이가 없는 것으로 나타났으나 미관상 전체적으로 심플하고 깨끗한 이미지를 연출할 수 있었다. 경제성 분석결과에 있어서는 전체 건설비용에 있어 기존 대비 약 20% 정도 절감되는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제87권4호
• /
• pp.297-304
• /
• 2023

Targeted introduction of explosion-resisting and energy-absorbing materials and optimization of explosion-resisting composite structural styles in underground engineering are the most important measures for modern engineering protection. They could also improve the survivability of underground engineering in wartime. In order to test explosion-resisting and energy-absorbing effects of high-performance equal-sized-aggregate (HPESA) concrete, the explosive loading tests were conducted on HPESA concrete composite plates by field simple explosion craters. Time-history curves of the explosion pressure at the interfaces were obtained under six conditions with different explosion ranges and different thicknesses of the HPESA concrete plate. Test results show that under the same explosion range, composite plate structures with different thicknesses of the HPESA concrete plate differ significantly in terms of the wave-absorbing ability. Under the three thicknesses in the tests, the wave-absorbing ability is enhanced with the growing thickness and the maximum pressure attenuation index reaches 83.4%. The energy attenuation coefficient of the HPESA concrete plate under different conditions was regressively fitted. The natural logarithm relations between the interlayer plate thickness and the energy attenuation coefficient under the two explosion ranges were attained.

• 한국공작기계학회논문집
• /
• 제17권1호
• /
• pp.86-91
• /
• 2008

The structural members must be designed to control characteristics of energy absorption for protecting passengers in a car accident. Study on collapse characteristics of structural member is currently conducted in parallel with other studies on effective energy absorption capacity of structural members with diverse cross-sectional shapes and various materials. This study concerns the crashworthiness of the widely used vehicle structural members, square thin-walled tubes, which are excellent in the point of the energy absorption capacity. The absorbed energy, mean collapse load and deformation mode were analyzed for side member which absorbs most of the collision energy. To predict and control the energy absorption, controller is designed in consideration of its influence on height, thickness and width ration in this study. The absorbed energy and mean collapse load of square tubes were increased by $15{\sim}20%$ in using the controller, and energy absorbing capability of the specimen was slightly changed by change of the high controller's height.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.387.1-387.1
• /
• 2016

Transparent materials are necessary for most photoelectric devices, which allow the light generation from electric energy or vice versa. Metal oxides are usual materials for transparent conductors to have high optical transmittance with good electrical properties. Functional designs may apply in various applications, including solar cells, photodetectors, and transparent heaters. Nanoscale structures are effective to drive the incident light into light-absorbing semiconductor layer to improve solar cell performances. Recently, the new metal oxide materials have inaugurated functional device applications. Nickel oxide (NiO) is the strong p-type metal oxide and has been applied for all transparent metal oxide photodetector by combining with n-type ZnO. The abrupt p-NiO/n-ZnO heterojunction device has a high transmittance of 90% for visible light but absorbs almost entire UV wavelength light to show the record fastest photoresponse time of 24 ms. For other applications, NiO has been applied for solar cells and transparent heaters to induce the enhanced performances due to its optical and electrical benefits. We discuss the high possibility of metal oxides for current and future transparent electronic applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.702-705
• /
• 2007

New heteroleptic tris-cyclometalated iridium complex, $Ir(ppy)_2(dpq-5CH_3)$, was prepared, where ppy and $dpq-5CH_3$ represent phenylpyridine and 2(5'-methyl)- 4-diphenylquinoline, respectively. The heteroleptic iridium complex shows high luminescence efficiency by the intramolecular energy transfer from the energy absorbing ppy ligands to the luminescent $dpq-5CH_3$ ligand leading to a decrease on quenching or energy deactivation.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.83-86
• /
• 2001

This paper presents an investigation of the contribution of fibers in energy absorption during impact and the effect of resin types on properties of the high strength polyethylene (Spectra-900 PE) composite. In high strength polyethylene fiber, main impact energy absorbing mechanism was tensile breakage and deformation of fiber. Two types of resin were examined : Unsaturated polyester (UP) and Epoxy. Tensile and 3-point bending test have been performed to investigate the changes of mechanical properties. In tensile and flexural testes, the Spectra Composite prepregged with UP showed higher properties than Spectra Composite prepregged with epoxy.

• 한국재료학회지
• /
• 제10권2호
• /
• pp.171-174
• /
• 2000

본 연구에서는 실리콘 wafer위에 sputtering방법으로 진공증착된 CoNbZr 비정질 박막을 Nd:YAG 레이저로 식각하기 위한 실험을 했는데, 금속의 경우 표면에서 빛의 반사율이 매우 크기 때문에 파장이 $1.06{\mu\textrm{m}}$인 Nd:YAG 레이저의 에너지를 흡수하는 것이 매우 어려우므로 식각이 거의 이루어지지 않았다. 그래서 이러한 문제를 해결하기 위한 새로운 시도로서 본 연구에서는 빛의 흡수율이 좋은 검은색의 polymer막을 금속박막의 표면에 도포하고 이 polymer막 위에 레이저를 조사해서 금속박막의 식각하는 실험을 실시하였다. 기존의 방법으로는 laser power가 332W나 되는데도 식각이 거의 일어나지 않았지만 본 연구의 방법을 이용했을 때는 laser power가 114W로 1/3정도 밖에 안 되는데도 레이저 식각이 비교적 양호하게 이루어졌다. 이는 검은색의 polymer층이 Nd:YAG 레이저 에너지의 흡수 및 전달 층의 역할을 하기 때문인 것으로 생각된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.430-433
• /
• 2005

Laser bonding between similar and dissimilar thermoplastics has been investigated by making use of laser transmission weld technique. Spot welding of two layers of plastic materials has been demonstrated by using of a high-quality diode-laser with 808nm wavelength. Weld areas increases according to power density, exposure time. The results of peel out test show that peel strengths increase with the area of molten plastics. Layers, which have the same chemical properties, have good bonding qualities. A bonding method which dye film is coated on the interface is used for laser bonding between plastics with high transmission for laser wavelength. Laser transmission bonding is worthy of attention because it is not in contact, requires a few tooling devices, allows a flexible energy delivery and produces nearly invisible welds