• Textile Coloration and Finishing
• /
• v.19 no.5
• /
• pp.8-16
• /
• 2007

The dye-resist effect of reactive dye-resist agents in reactive dyeing of silk was investigated. The dichlorotriazine-based dye-resists achieved a higher effectiveness than others since they make a charge barrier of diffusion in the silk fiber periphery due to high reactivity of dichlorotriazine group. Similarly, in the case of hetero-multifunctional dye-resist agent, the dye-resist agent containing both a dichlorotriazine and an ${\alpha}$-bromoacrylamide reactive groups achieved better resist effectiveness than those containing both a monochlorotriazine and an ${\alpha}$-bromoacrylamide groups. Also, their resist effectiveness was improved by increasing the number of sulfonate groups in the dye-resist agents and the number of reactive groups in the reactive dyes applied to them.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.4
• /
• pp.129-141
• /
• 2018

In this paper, two different flight training devices were constructed to verify the effectiveness of a pilot training system based on a Virtual Reality Head Mount Display. VFR Flight Procedure and IFR Flight Procedure were conducted by high level pilots with Commercial Pilot Licence. Flight data and pilot's visual data for each flight procedure were extracted, compared and analyzed with two training systems. Finally, the effectiveness of the training systems based on the VR HMD was demonstrated by assessing the given mission and the flight results.

• Journal of Distribution Science
• /
• v.17 no.7
• /
• pp.65-76
• /
• 2019

Purpose - The purpose of this study is to investigate economical ventilation effectiveness to reduce hazardous materials exposure and damage of workers by analyzing exposure amount of noxious substances under various ventilation conditions of nail salon for indoor environments. Research design, data, and methodology - This study was carried out with cooperation of Nail shop located in SeongNam city to involve an analysis of the environmental impact indoor air quality, pollutant exposure and economical cost-effectiveness in the nail workplace. The hazardous substances were PM-10(Particulate Matter-10㎛), VOCs(Volatile Organic Compounds) and Formaldehyde, which are the major materials of nail workplace. Results - PM-10 is reduced by about 60% with air cleaner, forced artificial ventilation by 32%, and natural ventilation by about 12%. TVOCs and Formaldehyde showed similar efficiency (80~100%) after natural ventilation and ventilation after 60 minutes. The removal efficiencies of VOCs and formaldehyde were similar to those of natural ventilation and mechanical ventilation system. However, in case of dust, natural ventilation was reduced by artificial ventilation system due to inflow of external dust during natural ventilation. Conclusions - If the pollution degree of outdoor air is not high, air volume is high, and natural ventilation is performed when the air conditioning and heating system is not operated. Even at the end of the work, it keeps operating for 60 minutes to remove the pollutants generated. Results of this analysis demonstrated that the worker environment can be improved by adopting institutional legislation and guidelines for ventilation.

• Journal of Agricultural Extension & Community Development
• /
• v.17 no.1
• /
• pp.75-101
• /
• 2010

This study tried to analyze the learning effectiveness of multi-media based class by comparing with traditional classroom method. The "Basic Agricultural Technology" course that is one of the required courses of agricultural high school was selected and its contents were digitalized on MS Powerpoint for multi-media based class. The thirty students were sampled for each experimental and control groups. The homogeneity and learning achievement of sample groups were tested for experiment. Same teacher took the classes of two groups and delivered same contents of course. Only difference between two groups was the delivery method, one is traditional classroom teaching method and the other was the multi-media based class. The learning achievements and satisfaction of sample were post-tested in order to analyze the learning effectiveness by comparing two teaching methods. The results showed that there was a significant difference between experimental and control group in learning achievement after ANCOVA controlled pre-test as covariance(F=5.08, p<.05). It means that the learning achievement of multi-media based class was higher than that of traditional classroom group. The results also showed that a significant difference in students’ satisfaction between two groups (t=5.57, p<.001). This study concluded that using multi-media in class could produce more learning achievements and satisfaction of students than traditional classroom method.

• Korean Journal of Child Studies
• /
• v.34 no.5
• /
• pp.43-59
• /
• 2013

The purpose of this study was to develop a Career Group Counseling Program to increase the career maturity, career-identity and career-decision self-efficacy of high school students, and to examine the effectiveness of such a program. In order to evaluate the effectiveness of the program thus developed, an experimental group which was exposed to the program and a control group without exposure to the program were compared. The program was administered over eight weekly sessions, each session lasting ninety minutes. The subjects in this study consisted of twenty four students. The experimental group and a control group were organized with twelve students in each. For the purpose of data processing, SPSS 16.0 was used to analyze the statistical results. The Career Maturity Scale, the Identity Scale, and Career Decision-Making Self-Efficacy Scale were used in a pre-test, post-test, and follow-up test. The findings of this study were as follows : The treatment group exhibited a significant statistically increasing degree of career maturity, career-identity and career-decision self-efficacy levels in comparison to the control group. The results of the study indicated the effectiveness of this newly developed Career Group Counseling Program on increasing career maturity, career-identity and career-decision self-efficacy levels.

• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.179-188
• /
• 2012

PURPOSES: The aim of this study is to analyze overloading control effectiveness of enforcing overweighted vehicles using HS-WIM (High-Speed Weigh-in-Motion) at main lane of expressway. METHODS: To analyze the weight distribution statistically, HS-WIM system should has an appropriate weighing accuracy. Thus, the weighing accuracy of the two HS-WIM systems was estimated by applying European specifications and ASTM (American Standards for Testing and Materials) for WIM in this study. Based on the results of accuracy test, overweight enforcement system has been operated at main lanes of two expressway routes in order to provide weight informations of overweighted vehicle in real time for enforcement squad. To evaluate the overloading control effectiveness with enforcement, traffic volume and axle loads of trucks for two months at the right after beginning of the enforcement were compared with data set for same periods before the enforcement. RESULTS: As the results of weighing accuracy test, both WIM systems were accepted to the most precise type that can be useful to applicate not only statistical purpose but enforcing on overweight vehicles directly. After the enforcement, the rate of overweighted trucks that weighed over enforcement limits had been decreased by 27% compared with the rate before the enforcement. Especially, the rate of overweighted trucks that weighed over 48 tons had been decreased by 91%. On the other hand, in counterpoint to decrease of the overweighted vehicle, the rate of trucks that weighed under enforcement limits had been increased by 7%. CONCLUSIONS: From the results, it is quite clear that overloading has been controlled since the beginning of the enforcement.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.1
• /
• pp.7-14
• /
• 2017

This study carried out a numerical analysis of the effects of hot waste water supply on the performance of a Type II absorption heat pump. There are two types of hot waste water supply, regular series flow and reverse series flow. Also it investigated the interaction between each type of flow and heat exchange solutions. As the effectiveness of heat exchange solutions increase, the steam generation and (COP) increase as well. If the effectiveness of a heat exchange solution is lower than 0.566, the steam generation rate of the reverse flow is lower than that of the regular series flow. A high effectiveness of heat exchange solution is therefore required to make a larger amount of steam in reverse series flow than with ordinary series flow. The COP difference between the two types of flow decreases with the increasing effectiveness of the heat exchange solution. Thus, a reverse flow type absorption heat pump can match the high steam generation rate and COP of the ordinary flow type when a highly effective heat exchange solution is applied.

• Journal of Korean Academy of Nursing Administration
• /
• v.9 no.3
• /
• pp.415-427
• /
• 2003

Purpose: The purpose of this study was to investigate the degree and pattern of knowledge management process, and to identify the relationship between knowledge management process and organizational effectiveness in clinical nurses. Method: Participants were 665 regular clinical nurses who had worked for over 1 year in general units of 9 tertiary medical hospitals including 2 national university hospitals, 5 university hospitals, and 2 hospitals founded by business enterprises. Data were collected from March to May 2003 through questionnaires. Four structured instruments were used to collect the data: Knowledge Management Process Scale(Jeong, Lee, Lee, & Kim, 2003), cCommitment Questionnaire(Mowday, Steers, & Porter, 1979), General Satisfaction Scale(CooK, Hepworth, Wall, & Warr, 1981), and one for general characteristics. The data were analyzed using factor analysis, reliability analysis, descriptive analysis, cluster analysis, one-way ANOVA, Scheffe test, correlation analysis with the SPSS for Windows 10.0 program. Result: 1) The average score for knowledge management process in nurses was $3.08{\pm}.54$ on a 5-point Likert scale. In order from highest mean score, the elements of knowledge management process, were Knowledge $Utilization(3.35{\pm}.57)$, Knowledge $Sharing(3.07{\pm}.58)$, Knowledge $Creation(2.99{\pm}.63)$, and Knowledge $Storage(2.91{\pm}.82)$. 2) Four knowledge management patterns for nurses, which were derived from cluster analysis, were inactivate pattern, delayed pattern, activate pattern, and high-activate pattern of knowledge management. 3) The degree of knowledge management process activation and 4 elements of knowledge management process, Knowledge Creation, Knowledge Storage, Knowledge Sharing, and Knowledge Utilization, were significantly correlated with nurses' organizational commitment and job satisfaction(p=.000). 4) The nurses' organizational commitment and job satisfaction showed significant differences according to the knowledge management patterns derived from cluster analysis of high-activate pattern, activate pattern, delayed pattern, inactivate pattern(p=.000). Conclusion: These results suggest that there are four knowledge management patterns for nurses, and knowledge management process positively affects the nurses' organizational commitment and job satisfaction. From the above findings, knowledge management process is empirically verified as a useful and effective method to increase organizational effectiveness, and develop the organization.

• The Journal of Korean Society for School & Community Health Education
• /
• v.6
• /
• pp.35-48
• /
• 2005

The age of the very first smoking is a significant indicator of life-long health status. Smoking prevention intervention was actively conducted based in middle and high schools with the support of the Korean Act for Health Promotion since 1998. These governmental supports became large and various smoking prevention programs were developed and conducted in diverse standards and perspectives. This study made a comprehensive descriptive literature review on smoking prevention educational programs for youth in Korea to identify the intervention quality and effectiveness of them for future smoking prevention program development. A total of 28 peer-reviewed journal articles published between May, 1995 and May 2005 (for the last 10 years) were finally included in this review process. The study participants should be adolescences in middle or high schools in Korea and the intervention types of the review studies should be smoking prevention or cessation educational programs. The outcomes of the reviewed studies were reanalyzed by the participants' characteristics, theory basement, evaluation design, intervention period, evaluation outcomes, and program effectiveness Most smoking intervention programs were not specified by sex and smoking status. Largely most intervention programs focused on male students although female students' smoking percent is increasing including both smokers and nonsmokers. Based on the school grades, the large percents of smoking intervention were conducted to the first grade of middle school and the first grade of high school. Almost 70% of the reviewed studies did not apply any health behavior change theories and the Transtheoretical model and social cognitive theory were utilized in 7 studies among the last reviewed 30%. The theory-based intervention studies had greater effectiveness than the non-theory based studies. More than 90% had quasi-experimental evaluation design and the effectiveness of the non-experimental designed study seemed over estimated than the quasi-experimental or experimental designed studies. More than 60% of the reviewed studies made their education for less than j days, over a short period and the evaluation factors were knowledge and attitude in general which can be obtained in short intervention period. Therefore, smoking intervention programs for youth in Korea need to be modified in terms of research design such as the intervention period, intervention-evaluation design, theory-based approach, and population-focused intervention specification.

• Elastomers and Composites
• /
• v.55 no.4
• /
• pp.306-313
• /
• 2020

To investigate the reinforcing effects of functional fillers in nitrile rubber (NBR) materials, high-structure carbon black (HS45), coated calcium carbonate (C-CaCO3), silica (200MP), and multi-walled carbon nanotubes (MWCNTs) were used as functional filler, and carbon black (SRF) as a common filler were used for oil-resistant rubber. The curing and mechanical properties of HS45-, 200MP-, and MWCNT-filled NBR compounds were improved compared to those of the SRF-filled NBR compound. The reinforcing effect also increased with a decrease in the particle size of the fillers. The C-CaCO3-filled NBR compound exhibited no reinforcing effect with increasing filler concentration because of their large primary particle size (2 ㎛). The reinforcing behavior based on 100% modulus of the functional filler based NBR compounds was compared by using several predictive equation models. The reinforcing behavior of the C-CaCO3-filled NBR compound was in accordance with the Smallwood-Einstein equation whereas the 200MP- and MWCNT-filled NBR compounds fitted well with the modified Guth-Gold (m-Guth-Gold) equation. The SRF- and HS45-filled NBR compounds exhibited reinforcing behavior in accordance with the Guth-Gold and m-Guth-Gold equations, respectively, at a low filler content. However, the values of reinforcement parameter (100Mf/100Mu) of the SRF- and HS45-filled NBR compounds were higher than those determined by the predictive equation model at a high filler content. Because the chains of SRF composed of spherical filler particles are similarly changed to rod-like filler particles embedded in a rubber matrix and the reinforcement parameter rapidly increased with a high content of HS45, the higher-structured filler. The reinforcing effectiveness of the functional fillers was numerically evaluated on the basis of the effectiveness index (��SRF/��f) determined by the ratio of the volume fraction of the functional filler (��f) to that of the SRF filler (��SRF) at three unit of reinforcing parameter (100Mf/100Mu). On the basis of their effectiveness index, MWCNT-, 200MP-, and HS45-filled compounds showed higher reinforcing effectiveness of 420%, 70%, and 20% than that of SRF-filled compound, respectively whereas C-CaCO3-filled compound exhibited lower reinforcing effectiveness of -50% than that of SRF-filled compound.