• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.437-443
• /
• 2010

To be economically profitable, the poultry industry demands an increase in stocking density, which could adversely affect chicken welfare. The current study was performed to investigate the effect of stocking density on stress-related, heat shock protein genes (HSP70 and HSP90), 3-hydroxyl-3-methyl-glutaryl coenzyme A reductase (HMGCR) gene and telomere length in broiler chickens. Seven-day-old broiler chickens were housed at High (0.0578 $m^2$/bird), Standard (0.077 $m^2$/bird) and Low (0.116 $m^2$/bird) stocking densities with 8 replicates each until 35 d of age. The growth performance, such as body weight gain and average daily feed intake, was found to be significantly (p<0.05) higher in the Low density group, but these parameters did not show any difference between the High and Standard groups. Other growth performance, such as feed conversion ratio and final feed intake, showed no difference among the treated groups. The expression levels of HSP70 and HMGCR were found to be elevated with the increase of stocking density. The expression level of these genes was significantly (p<0.05) higher in the High density stocked group compared with the other groups, whereas the expression levels were not significantly different between the Low and Standard groups. The expression levels of HSP90 did not show any significant changes among the treated groups. The telomeric length of the birds housed in High density was reduced significantly (p<0.05) when compared to that of the birds in Low density. These results clearly indicate that birds stocked at high density show physiological adaptive changes indicative of stress at gene transcriptional and telomere levels.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.2
• /
• pp.92-100
• /
• 1995

To increase the capacity of positive electrode materials for matching the high capacity negative electrode materials in alkaline rechargeable batteries, high-density nickel hydroxide powders were made through a continuous process from nickel sulfate reacted with ammonia and sodium hydroxidc. The effect of operating conditions on structure, shape, size distribution, apparent density and tap density of powders were investigated. Crystal structure of nickel hydroxide powder was hcp according to Bravais Lattice. The increase of mean residence time promoted the growth of (101) plane. The shape of powder was nearly spherical. Their size was in the range of $2~50\mu\textrm{m}$. The size distribution of the powders prepared was narrower than that of commercially obtained nickel hydroxide. Apparent density and tap density were 1.6~1.7g/cc and 2.0~2.1g/cc, respectively.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.305-310
• /
• 2001

Within some degree of journal misalignment, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined under the condition of variable density and specific heat. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the effects of variable density and specific heat on shaft misalignment are significant in determining the load capacity of a journal bearing operating at high speed.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.287-292
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of journal bearing at high speed operation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.9
• /
• pp.468-474
• /
• 2003

This paper describes the development of an open frame type high power density switching converter. It is based on the active clamp forward converter with synchronous rectifier, and packaged by using the open frame and multi-layer printed circuit board (PCB) technology to achieve the higher power density. Furthermore, the windings of transformer and inductor are also realized by multi-layer PCB so that it also contributes to achieve higher power density. Through the experiment on the prototype converter of 50[W], it is confirmed that power density of 50[W/i$n_3$] and maximum efficiency of over 91[%] are obtained.

• Journal of ILASS-Korea
• /
• v.8 no.2
• /
• pp.7-15
• /
• 2003

The effects of fuel density and fuel viscosity on spray characteristics were investigated under two different gas turbine fuels and various fuel supply pressure conditions through measurement of SMD, number density and volume flux by using PDPA system in dual orifice injector for gas turbine engines. In this study, we found out that the droplet size and spray structure are strongly depend on fuel density for dual orifice injector. The spray characteristics of high density fuel in dual orifice injector are similar with the characteristics of low density fuel in single orifice injector. The shear region between primary main fuel stream and secondary main fuel stream is examined in low density fuel condition but not exist in high density fuel condition, then this shear region is very important in quality of gas turbine spray. There are worth consideration for the effect of fuel density on spray characteristics in frontal device design to improve combustion efficiency.

• Journal of radiological science and technology
• /
• v.30 no.4
• /
• pp.365-371
• /
• 2007

Recent studies suggest a possible pathogenic linkage between the osteoporosis and atherosclerosis. We investigated the relationship between cardiovascular risk factors, including high sensitivity C-reactive (hs-CRP), hs-CRP and bone metabolism in females. Anthropometric measurements were performed on 300 women, and cardiovascular risk factors, including fasting blood glucose, lipid profiles and hs-CRP. An atherogenic index was calculated using the serum total cholesterol level divided by the high-density lipoprotein cholesterol level. The lumbar spine bone mineral density was measured using dual X-ray abosorptiometry. By bivariate analysis, the lumbar spine BMD showed negative correlations with age, systolic and diastolic blood pressures, serum total cholesterol, high-density lipoprotein cholesterol. The Age, BMI and high-density lipoprotein cholesterol showed significant correlations with the lumbar spine BMD. From linear regression analyses of all the study subjects, age, high-density lipoprotein cholesterol were found to be determinants of the lumbar spine BMD($R^2=0.272$).

• Bulletin of the Korean Chemical Society
• /
• v.30 no.5
• /
• pp.1177-1180
• /
• 2009

• Korean Journal of Environment and Ecology
• /
• v.28 no.5
• /
• pp.516-522
• /
• 2014

This study was conducted to investigate the impact of the anthropogenic factors affecting distribution of the Red-crowned Crane and White-naped Crane wintering in Cheorwon, Korea. Especially, it was investigated that the impact power and its range of the anthropogenic effect to the feeding flock density in cranes due to the paved road, residential area, military facilities and greenhouse density. The Red-crowned Crane and the White-naped Crane showed the similar preference and sensitivity against anthropogenic factors, because correlation of feeding flock density of the Red-crowned Crane and White-naped Crane was similar in the same site. The feeding flock density of the cranes near the residential area was lower than that of area far from the area, and tended to increase within 2.5 km distance. The increasing tendencies of feeding flock density from military facilities and high traffic volume road were similar, but the density in military facilities increased within 0.8 km, and the density from high traffic volume road increased within 2 km. This results suggested that military facilities and the road with high traffic volume made significant influence on foraging densities to the certain range. As the distance from the road with low traffic volume increased, feeding flock density tended to decrease. The area near the low traffic volume road had high feeding flock density because remaining rice grains were preserved by intermittent disturbances in that area. If the density of greenhouse is lower than $40/km^2$, feeding flock density in the low greenhouses density area was higher than high greenhouses density area. However, there was no difference in the feeding flock density if the density of the green houses is higher than $40/km^2$.

• Journal of the Korean Society of Costume
• /
• v.58 no.4
• /
• pp.26-34
• /
• 2008

The purpose of this study was to create a database of information on the mechanical properties of two different waterproof and breathable shell fabric groups(high density woven and PTFE laminate) used for outdoor apparel and to compare and correlate data of their mechanical properties and hand values. The results of this study were as follows; There were no statistically significant differences between two fabric groups in extension, bending and shearing properties. There were statistically significant differences between two fabric groups in MMD, SMD, LC and we values. High density woven fabrics had smoother surface than PTFE laminated fabrics. PTFE laminated fabrics can be compressed easily more than high density woven fabrics but their recovery after compression was not better than high density woven fabrics. There were statistically significant differences between two fabric groups in NUMERI, FUKURAMI. There was statistically significant difference between two fabric groups in total hand value. Total hand value and mean deviation of MIU had a very high and statistically significant negative correlation coefficient.