• 대한약침학회지
• /
• 제16권3호
• /
• pp.23-29
• /
• 2013

Objectives: Dyslipidemia in diabetes mellitus is a significant risk factor for the development of cardiovascular complications. The aim of this study was to evaluate the effect of the ethyl-acetate fraction of an ethanolic extract from Streospermum suaveolens on lipid metabolism in streptozotocin (STZ)-induced diabetic rats. Methods: Diabetes was induced by intraperitonial injection of STZ (50 mg/kg). Diabetic rats were treated with an ethyl-acetate fraction orally at doses of 200 and 400 mg/kg daily for 14 days. On the $15^{th}$ day, serum lipid profiles, such as total cholesterol (TC), triglycerides (TG), low-density lipoprotein (LDL), and high-density lipoprotein (HDL), were estimated in experimental rats. The atherogenic (AI) and the coronary risk (CRI) indices were also evaluated. Results: The ethyl-acetate fraction at doses of 200 and 400 mg/kg significantly (P < 0.001) and dose-dependently reduced serum cholesterol, triglycerides and LDL, but increased HDL towards near normal levels as compared to diabetic control rats. The fraction also significantly (P < 0.001) lowered the atherogenic index (AI) and coronary risk index (CAI) in a dose-dependent manner. Conclusion: The present study demonstrated that the ethyl-acetate fraction of Stereospermum suaveolens exhibits a potent antihyperlipidemic activity in hyperglycemic rats and suggests that the plant may have therapeutic value in treating the diabetic complication of hyperlipidemia.

• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.59-68
• /
• 2023

Currently, yellow phosphor of Y3Al5O12:Ce3+ (YAG:Ce) fluorescent material is applied to a 450~480nm blue LED light source to implement a white LED device and it has a simple structure, can obtain sufficient luminance, and is economical. However, in this method, in terms of spectrum analysis, it is difficult to mass-produce white LEDs having the same color coordinates due to color separation cause by the wide wavelength gap between blue and yellow band. There is a disadvantage that it is difficult to control optical properties such as color stability and color rendering. In addition, this method does not emit purple light in the range of 380 to 420nm, so it is white without purple color that can not implement the spectrum of the entire visible light spectrum as like sunlight. Because of this, it is difficult to implement a color rendering index(CRI) of 90 or higher, and natural light characteristics such as sunlight can not be expected. For this, need for a method of implementing sunlight with one LED by using a method of combining phosphors with one light source, rather than a method of combining red, blue, and yellow LEDs. Using this method, the characteristics of an artificial sunlight LED device with a spectrum similar to that of sunlight were demonstrated by implementing LED devices of various color temperatures with high color rendering by injecting phosphors into a 405nm deep blue LED light source. In order to find the spectrum closest to sunlight, different combinations of phosphors were repeatedly fabricated and tested. In addition, reliability and mass productivity were verified through temperature and humidity tests and ink penetration tests.

• 한국결정성장학회지
• /
• 제25권1호
• /
• pp.35-38
• /
• 2015

LED는 소비전력 절감, 사용수명 증가, 발광 파장 변화를 통한 다변적 적용이 가능하여 에너지 효율 증대의 대안으로 각광받고 있으며, 조명뿐만 아니라 디스플레이 백라이트, 차량용 헤드라이트 등 다양한 분야에 적용되고 있다. 현재 백색 LED를 구현하는 데에는 청색 LED와 황색 형광체를 혼합하는 방식이 주로 활용되며, 황색 형광체로는 YAG : $Ce^{3+}$가 많이 이용된다. 기존에는 형광체를 epoxy resin과 혼합하여 LED chip 위에 도포하여 경화시키는 패키징 방식을 주로 사용하였다. 하지만 페이스트 기반 패키징 방식은 열에 의한 형광체의 특성 저하와 효율 감소 문제를 일으킨다. 이러한 문제를 해결하기 위해 형광체 플레이트를 이용한 remote 방식이 이용되고 있지만, 플레이트 내부 전반사로 인한 광 효율 손실 또한 해결해야 할 문제이다. 본 연구에서는 플레이트 측면을 Ag로 코팅함으로써 플레이트 내부의 전반사에 의한 광 효율 손실을 해결하고자 하였다.

• 디자인학연구
• /
• 제6권1호
• /
• pp.11-22
• /
• 1993

The purpose of this study was to provide basic information for establishment of a desirable design promotion policy drive by research and analysis of recognition to design by consumers (including students) and designers and their level, merchandise evaluation evaluation and obstructing factors in revitalization of designs. To implement such purpose as referred to hereinabove, research was made by introduction of questionaires which were distributed to 500 persons of consumers group and 350 individuals of registered designers in Seoul, and for analysis of the data, density and percentage (%) were obtained by use of SAS Package and the dispersed analysis and correlationship were added for necessary parts. The result of study is summarized as follows; (l)The consumers remind the design as costume (21%) and molding (20%), and the designers remind it as creativity (27%) & molding (14%) respectively and the reminding of design by the two groups was indicated very simi lar. (p < 0.001) (2)As per the recogni tion of roles by the designers the research has highly indicated as contribution to improving living standards or development of economy & industry, and also indicated that it creates excessive consumption with sti$$\mu$ative manner. (3)The design reacts as an important parameter in selecting cri teria of merchandises and deciding factors for purchasing and also, in enhancement of competitive power of merchandise impact of design (2.36) was regarded very high. (4)The Korean-made home appliances in image is assessed as vulnerable than that of Japanese products, and the product designing level is also shown difference from advanced countries (1.36), but has indicated as somewhat better than those competitive nations (0.51) (5)The satisfaction to design policy of the Gov't is very low (1.69) and they recommended for new establishment of Policy undertaking department within the Gov't and indicated reasearch & development of design as the major issue. In regard to the above I'd like to emphasize the design industry $$\mu$t be dealt with the national level as a whole in order to promote thereof.

• 한국세라믹학회지
• /
• 제51권6호
• /
• pp.533-538
• /
• 2014

Today, silicon and epoxy resin are used as materials of conversion lenses for white LEDs on the basis of their good bonding and transparency in LED packages. But these materials give rise to long-term performance problems such as reaction with water, yellowing transition, and shrinkage by heat. These problems are major factors underlying performance deterioration of LEDs. In this study, in order to address these problems, we fabricated a conversion lenses using glass, which has good chemical durability and is stable to heat. The fabricated conversion lenses were applied to a remote phosphor type. In this experiment, the conversion lens for white LED was coated on a glass substrate by a screen printing method using paste. The thickness of the coated conversion lens was controlled during 2 or 3 iterations of coating. The conversion lens fabricated under high heat treatment temperature and with a thin coating showed higher luminance efficiency and CCT closer to white light than fabricated lenses under low heat treatment temperature or a thick coating. The conversion lens with $32{\mu}m$ coating thickness showed the best optical properties: the measured values of the CCT, CRI, and luminance efficiency were 4468 K, 68, and 142.22 lm/w in 20 wt% glass frit, 80 wt% phosphor with sintering at $800^{\circ}C$.

• 한국식품영양과학회지
• /
• 제44권12호
• /
• pp.1771-1778
• /
• 2015

본 연구에서는 고지방식이로 비만 유도된 쥐를 대상으로 10주간 옻식초를 급여하였을 때 비만에 미치는 영향을 알아보고자 하였다. 옻식초는 무독화된 옻을 이용하여 알코올 발효 후 아세트산 발효를 거쳐 제조하였으며, 흰쥐를 일반식이(normal chow diet)와 고지방식이(fat 60 %kcal) 섭취군으로 나누어 12주 동안 비만 유도를 한 후 총 5군으로 나누었다. 일반식이와 정제수를 음용한 CON군, 고지방식이와 정제수를 음용한 OB-DW군, 고지방식이와 1% 아세트산을 음용한 OB-AA군, 고지방식이와 1% 옻식초를 음용한 OBRV군, 고지방식이와 0.1% 카페인 용액을 음용한 OB-CF군으로 나누어 총 10주 동안 해당 식이와 실험시료를 공급하였으며, 연구 종료 후 체중, 지방 무게, 지방구 크기 및 개수, 혈액과 간 조직의 지질 profile, 지방조직의 glycerol-3-phosphate dehydrogenase와 lipoprotein lipase(LPL) 효소 활성을 분석하였다. 그 결과 OB-DW군과 비교하여 OBRV군에서 체중 증가량과 식이효율이 유의적으로 감소하였고, 혈중 총 콜레스테롤과 중성지방 함량, 심장동맥경화지수(CRI), LPL 활성이 유의적으로 감소하였으며, 또한 혈중 유리지방산과 분변 중성지방의 함량이 유의성 있게 증가하였다(P<0.05). 항비만 효과를 살펴보기 위해 비만 흰쥐에게 옻식초를 음용시켰을 때 혈청이나 간의 지질 함량을 개선시키고 지질 배설을 증가시켜 부작용 없이 식품소재로서 비만을 일부 개선시키는 효과를 규명하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권6호
• /
• pp.737-743
• /
• 2014

본 논문에서는 기존 1kW 할로겐 탐조등을 대체하기 위한 고출력 LED 탐조등에 관하여 기술하였다. 설계사양은 KDS 6230-1046-1과 KS V 8469를 기준으로 하였으며, 요구 광도 800,000cd를 만족시키기 위하여 지향각 $6^{\circ}$의 렌즈를 사용하였다. 시제작 LED 탐조등의 방열은 공랭식으로써 팬이나 히트파이프를 사용하지 않았다. 시험결과, 시제작 LED 탐조등의 소비전력은 148W로 1kW 할로겐 탐조등에 비해 85% 절감되었으며, 중심광도는 945,000cd로써 KS V 8469를 만족하였다. 광효율은 기존 탐조등보다 4.7배 향상되었으며, 지향각, 색온도 및 연색성은 각각 $5.4^{\circ}$, 5,500K, 70이었다. LED 탐조등의 외함 온도는 $60^{\circ}C$ 이하이고, SMPS 주변 온도는 $50^{\circ}C$ 이하로 IEC 60092-306을 만족하였다.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.443-454
• /
• 2013

콜로이드 실리카와 가용성 실리카를 이용하여 나트륨이 첨가되지 않은 다양한 금속이온 첨가 MCM-41 촉매를 제조하였다. 전이금속 이온인 $V^{5+}$, $Co^{2+}$ 및 $Ni^{2+}$이 MCM-41에 첨가되었을 경우 기공벽 내의 실리콘 이온과 등방치환을 하여 실리카 기공벽 내에서 독립된 단일 활성점을 형성하여 우수한 환원 및 활성 내구성을 보였다. 수소 승온 환원법을 이용하여 Co-MCM-41 촉매의 기공 곡률 반경효과에 대해 검토해 본 결과, 적절한 환원 처리와 기공 크기 및 pH 조절에 따라 코발트 금속입자의 크기를 1nm 이하의 범위에서 조절할 수 있었으며, 이 미세 금속 입자들은 표면 금속이온들과의 결합으로 인해 상당한 고온 안정성이 있음을 발견하였다. 완전 환원 후에도 비정형 실리카의 부분 덮힘으로 인해 금속 입자들의 표면 이동 및 뭉침 현상이 현저히 저하되는 것을 볼 수 있었다. 이들 촉매의 반응 예로 금속 입자 크기에 민감한 단일층 탄소 나노튜브의 합성을 Co-MCM-41을 이용하여 실시하였고, 금속 입자의 안정성 시험반응으로 Co 및 Ni-MCM-41을 이용한 CO 메탄화 반응, V-MCM-41을 이용한 메탄올 및 메탄의 부분 산화반응 및 기공곡률 반경이 촉매활성에 미치는 영향 등을 살펴보았다.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 춘계학술발표대회
• /
• pp.76-76
• /
• 2001

The objective of this study was to optimize the vitrification method of in vitro produced bovine embryos. Thus, in vitro produced embryos at 8 cell, morula and blastocyst stages were vitrified on electron microscope grids (EM grids) or in open pulled straws (OPS) with EG5.5 (5.5 M ethylene glycol, 1.0 M sucrose and 10% FBS in m-DPBS medium) freezing solution and their survival rates after thawing were compared. The embryos on EM grids or in OPS were briefly exposed to EG5.5 freezing solution and plunged directly into liquid nitrogen within 30 to 35 sec. Post-thawed embryos were serially diluted in 0.5, 0.25 and 0.125 M sucrose in m-DPBS, each for 1 min, and then cultured in CRI aa medium supplemented with 10% FBS. Embryonic survival rate was assessed as re-expanded and hatched rates of those embryos after warming. The rates of re-expansion embryos did not significantly different between EM grid (8 cell: 42.10%, morula: 66.66% and blastocyst: 77.08%) and OPS (8 cell: 47.36%, morula: 61.90% and blastocyst: 83.33%) methods. In addition, the hatched rates in EM grid (8 cell: 31.57%, morula: 57.14% and blastocyst: 72.91%) were similar to those in OPS (8 cell. 34.21%, morula: 50.00% and Blastocyst: 77.08%). Interestingly, even at the same blastocyst stage, the in vitro survival of day 7 embryos (EM grid: 79.48 and OPS: 87.18%) was higher than those of day 8 embryos (EM grid: 72.10 and OPS: 82.06%). The total cell number of blastocyst developed in vitro after vitrification was examined with Hoechst 33342 staining to compare the embryo quality among different treatment groups. The total cell number of blastocyst was not significantly different between vitrified groups (EM grid: 162.4$\pm$8.0 and OPS: 158.4$\pm$7.1) and unvitrified control (168.0$\pm$5.6). These results indicate that both vitrification containers can provide the high rate of embryo survival. Moreover, the OPS container may not need a cap to protect the container from floating after immersion in L$N_2$. Therefore, this study suggest that bovine embryos can be cryopreserved easily, effectively and successfully by vitrification method using EM grid or OPS with EG5.5 freezing solution. In the future, the Pregnancy rate would be investigated after transfer of our vitrified embryos into the appropriated recipients.