• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.512-513
• /
• 2008

The study examined what effects 100kHz PWM LED light irradiation causes to bone marrow cells of SD-Rat when LED characterized cheap and safe is used onto the light therapy by replacing the low 1evel laser. We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Consequent1y, the current value could be controlled by the change of 1eve1 in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of Rat bone marrow cells was verified in 100kHz PWM LED light irradiation group as compared to non-irradiation group.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.581-582
• /
• 2010

광 의료 분야 중 저출력레이저 치료에 사용되는 레이저와 같은 특정 파장을 발생하고 레이저보다 안정적으로 사용이 가능한 고휘도 LED를 조사하여 광 의료 분야에 적용할 수 있는 시스템을 개발하였다. 광조사 시스템은 마이크로 컨트롤러, FPGA, TLC5941 및 고휘도 LED를 이용하여 설계 및 제작하였으며 광조사 시간, 강도, 주기 등 세포 증식에 영향을 칠 수 있는 다양한 변수들의 제어가 가능하도록 하였다. 또한 세포 배양에 사용되는 인큐베이터 내부의 조사가 용이하도록 탈부착이 가능한 모듈화 된 LED를 설계 제작하여 세포 증식에서 발생 가능한 생물학적 변수를 최소화하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.560-563
• /
• 2006

LED is promising for the application of specialty illumination. Thiscolor management system, V-core, with LED light sources and the structure of V-core for LCoS projector has been proposed to improve the primary saturation, uniformity and contrast. We designed the high efficient LED modules for high brightness requirement. The LED module can operate in narrow-direction indicator, $12^{\circ}$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.261-263
• /
• 2004

This paper studies the lighting pattern control of a high-brightness LED warning light. The driving circuit for the warning light is composed of a full-wave rectified circuit and of a control circuit using a micro-controller (AT89c2051). The micro-controller is programmed in a suitable manner to accomodate a number of variable lighting patterns and to adjust the blinking speed. To reduce the total number of LEDs installed a special consideration is made to the bundled pattern in a lamp module which is lit simultaneously. The resultant LED warning light has merits not only over the conventional incandescent warning light on the energy saving aspect but also over some other LED-type ones in the market.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.294-298
• /
• 2000

As the LED or LCD technology has been developed, if we use LED or LCD pannel, more wide color range coluld be obtained as CRT monitor. Specially, full color LED display is developed by high brightness blue LED. It can be applicable to display pannel with a long-life, wide visible angle and high brightness. A display pannel shows the images of CRT monitor performed by the main computer. Graphic application in the main computer is therefore more important in the market. Conventional 3D STUDIO, one of graphic softwares, has difficulties in manipulating and understanding the specific terminology so that one may need more time to learn it. We, therefore, developed graphic application which can recycle the conventional 3D images by creating or editing the image easily.

• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.255-260
• /
• 2023

In order to spread LED lighting, LED lighting technology directly driven by alternating current (AC) commercial power has recently been introduced. Since current does not flow at a voltage lower than the threshold voltage of the LED, a non-conductive section occurs in the current waveform, and the higher the threshold voltage of the LED, the more discontinuous current waveforms are generated. In this paper, multi-LED modules are connected in series so that the threshold voltage can be adjusted according to the number of LED modules. A small number of LED modules are driven at a low instantaneous rectified voltage, and a large number of LED modules are driven at a high instantaneous rectified voltage to lengthen the overall lighting time of AC-LED lighting, thereby minimizing the luminance deviation of AC-LED lighting. In addition, the load current flowing through the LED module is adjusted to be the same as the design current even at the maximum rectified voltage higher than the design voltage, so that the light brightness of the LED module is kept constant. Therefore, even if the rectified voltage applied to the LED module changes, the AC-LED lighting in which the light brightness is constant and the luminance deviation is minimal has been realized.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 춘계학술대회 논문집
• /
• pp.10-11
• /
• 2008

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage. And then, each experiment was performed to irradiation group and non-irradiation group for bone marrow cells. MIT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590nm transmittance of ELISA reader. As a result, the cell increase of bone marrow cells was verified in irradiation group as compared to non-irradiation group.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.480-480
• /
• 2007

This paper performed the basic study for developing the light therapy equipment for medical treatment. We developed the equipment for medical therapy using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, and to control the change of output value, TLC5941 was used. Control stage is divided into 4 step by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and the output of a high brightness LED could be controlled, stage by stage.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2017년도 추계학술대회
• /
• pp.220-221
• /
• 2017

초기의 LED(light emitting diode)는 광 출력이 낮아 각종 기계장치의 Table 시용 소자로 많이 사용되었으나, LED 기술의 발달로 고출력 고휘도로 색 Table 현이 가능하게 되었다. 따라서 교통 신호등, 대형 전광판, 자동차Table 시과 같은 디스플레이로 사용하고 있으며, 높은 광량을 요구하는 백열등, 형광등과 같은 실내외 조명에서도 LED가 사용되고 있다. 항로Table 지에 사용되는 등명기 또한 전구에서 LED로 교체되었으며, 초기의 해상용 LED 등명기는 다수의 LED를 사용하여 제작되었다. 하지만 고출력 LED의 개발로 광학 설계만 새롭게 한다면 소수의 LED만을 사용하더라도 해상용 LED 등명기에서 요구하는 광도 및 배광을 만족시킬 수 있다.

• 전자공학회논문지D
• /
• 제35D권6호
• /
• pp.79-91
• /
• 1998

Escape cone 개념에 바탕을 둔 구조 해석을 통해 고휘도 LED의 설계 이론을 확립하였다. 확립된 설계이론에 근거하여 최근까지 개발된 중요한 고휘도 LED의 구조들을 비교/분석하였으며, 각각의 구조에서 출력결합효율을 대략적으로 계산하였다. Ohmic전극 영역에서의 광자 손실이 매우 심각한 것으로 알려진 AlGaAs 또는 InGaAIP LED의 경우, window layer(WL)와 transparent substrate(TS)를 활용하게 되면 전극에 의한 광자의 차폐효과가 크게 감소되어 발광효율이 크게 개선된다. 청색으로부터 녹색까지 상당히 넓은 영역에 걸친 발광특성을 갖는 InGaN LED 경우의 중요한 차이점의 하나는 WL를 사용하지 않으면서도 괄목할만한 발광효율을 얻어 낼 수 있다는 사실인데, 그 원인은 GaN와 같은 넓은 bandgap을 갖는 반도체의 경우 ohmic 전극에서의 광자의 손실이 상대적으로 미미하며 그 결과로 전극에 의한 광자의 차폐현상이 상대적으로 큰 문제가 되지 않기 때문인 것으로 분석된다.