• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• 전자공학회논문지 IE
• /
• 제46권3호
• /
• pp.12-18
• /
• 2009

본 논문은 LED 디스플레이 시스템에서 균일하고 부드러운 영상표출을 위하여 각각의 Red, Green, Blue LED의 휘도를 조절하여 흰색보정을 유지할 수 있는 프로세서를 설계하였다. 이 프로세서는 일반적인 LED소자의 특성곡선을 근거로 "a"를 고유특성 값, "b"를 사용시간에 따른 휘도보정 값, "X"를 구동전류 값, "Y"를 휘도 값이라 할 때, "Y=aX+b"로 설정되는 휘도 특성함수에 의하여 각 픽셀의 휘도에 따른 구동 전류 값을 산출하여 휘도를 보정하고, 또한 장시간 사용 시 LED소자의 휘도 저하 문제를 해결하기 위하여 "b"값을 조절하여 LED 디스플레이 시스템의 전체 평균 휘도 값을 상향시킬 수 있도록 구현하였다.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.15-21
• /
• 2004

광속구(integrating sphere photometer), 분광기(monochromator)등을 이용하여 노랑색(Y), 녹색(G), 백색(W)의 SMD(surface mounted device)형태의 HB LED(high brightness light emitting diode)에 대한 광속(luminous flux, LF), 상관 색온도(correlated color temperature, CCT), CIE 색도좌표(chromaticity coordinate CC)등 광특성을 실험하여 그 결과치를 비교 분석하였고, 백색 LED에 대해서는 연색지수를 고찰하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1433-1434
• /
• 2008

LED has gained its importance in the projection display market from very compact, micro-projectors to potentially high output, desktop systems. In both of these systems, the output levels are less than desirable. This paper describes practical recycling and multiplexing systems that provide brightness increases, and allow projectors to achieve outputs beyond its current levels.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.243-247
• /
• 2009

A Radioactive constraint of the nuclear fuel assembly irradiated by neutron during normal operation cycle of the nuclear power plant is typically on the order of about 3 kGy/h. In order to inspect nuclear fuel assembly using a VT (vision technology) system, the light such as halogen lamp is used. As the halogen lamp has lower color temperature than the sun light, the objects under halogen lamp illumination are seemed to be tinted with red. In this paper, high brightness LED is considered to be used as the light source of VT system. The high brightness LED, which is a key light source of the VT system, have been gamma irradiated at the dose rate of 4 kGy/h during two hours up to a total dose of 8 kGy. The radiation induced color-center in the LED housing cap made of plastics materials is observed.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.593-600
• /
• 2010

In this paper, High brightness LED (light-emitting diodes) driver IC (integrated circuit) using new current sensing circuit is proposed. This LED driver IC can provide a constant current with high current precision over a wide input voltage range. The proposed current-sensing circuit is composed of a cascode current sensor and a current comparator with only one reference voltage. This IC minimizes the voltage stress of the MOSFET (metal oxide semiconductor field effect transistor) from the maximum input voltage and has low power consumption and chip area by using simple-structured comparator and minimum bias current. To confirm the functioning and characteristics of our proposed LED driver IC, we designed a buck converter. The LED current ripple of the designed IC is in ${\pm}5%$ and a tolerance of the average LED current is lower than 2.43%. This shows much improved feature than the previous method. Also, protections for input voltage and operating temperature are designed to improve the reliability of the designed IC. Designed LED driver IC uses 1.0 ${\mu}m$ X-Fab. BiCMOS process parameters and electrical characteristics and functioning are verified by spectre (Cadence) simulation.

• 디지털융복합연구
• /
• 제12권4호
• /
• pp.311-318
• /
• 2014

본 논문은 의료영상시스템, 공장자동화 시스템에서 핵심기술인 정확한 검사와 계측을 위하여 보다 선명하고 안정정인 환경을 제공하기 위한 조명으로 고휘도 LED를 이용한 조명광원의 제어기를 개발하였다. 고휘도 LED 전용드라이버를 장착하여 정전류 방식으로 안정된 전원을 공급하도록 설계하고, 32비트 ARM 프로세서 코어를 사용하여 화상처리 시 필수적인 요소인 광량을 256단계로 나누어 리모트 컨트롤 및 외부 인터페이스가 가능하도록 하여 볼륨의 저항 값 오차로 인하여 발생되는 밝기 값의 부정확을 방지하고 디지털화함으로써 빛의 재현성을 개선하였다. 아나로그 전원에 비하여 조광 범위가 넓고 낮은 레벨에서도 조광이 가능하도록 설계 하였으며 또한 RS-485 통신기능을 추가하여 외부장치로부터 데이터를 받아 사용자가 광량조절 및 ON/OFF 제어가 가능하도록 개발 하였다.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1087-1092
• /
• 2007

We developed the 4-channel Light Medical Therapy Apparatus for Skin Injury Cure using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity and reservation. In this paper, the designed device was used to find out how high brightness LED light affects the skin injury of SD-Rat(Sprague-Dawley Rat). In the experiment, $1\;cm^2$ wounds on the skin injury of SD-Rat(Sprague-Dawley Rat) were made. Light irradiation group and none light irradiation group divided, each group was irradiated one hour a day for 14 days. In result, compared with none light irradiation group, the lower incidence of inflammation and faster recovery was shown in light irradiation group.

• 조명전기설비학회논문지
• /
• 제26권9호
• /
• pp.8-17
• /
• 2012

This paper proposes high performance control of light emitting diode(LED) drive system for liquid crystal display(LCD) backlight. The CCFL(cold cathode fluorescent lamp)was used to a conventional LCD backlight. Due to improvement on luminous efficiency, long life and wide color gamut, LED has gradually substituted for CCFL as backlight. The backlight using LED is necessary to use many LED. For that reason, the LED backlight is using a lot of LED driving circuits. The many LED driving circuit is generated a current deviation between LED. Eventually, it is caused brightness deviation between LED. Therefore, this paper improves the current deviation using transformer and balancing capacitor to solve this problem. Also, for accurate and uniform brightness control, this paper is applied the artificial intelligent control to a dimming control. This paper is compared with conventional system, and validity of this paper proves through that result.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.218-220
• /
• 2008

This paper describes buck converter's MOSFET driver for high-brightness LED strings. The power driving high-side MOSFET is supplied from the power source of control circuit part. The practical considerations and future work are also described.