• Asian-Australasian Journal of Animal Sciences
• /
• 제32권12호
• /
• pp.1907-1913
• /
• 2019

Objective: Homoacetogens play important roles in the production of acetate in the large intestine of monogastric mammals. However, their diversity in the porcine large intestine is still unknown. Marker gene analysis was performed to assess the effects of energy level on the diversity and population densities of homoacetogens in porcine feces. Methods: Crossbred pigs were fed high or low energy-level diets. The high-intake (HI) diet was sufficient to allow a daily gain of 1.2 kg. The low-intake (LI) diet provided 0.6 times the amount of energy as the HI diet. Genetic diversity was analyzed using formyltetrahydrofolate synthetase gene (FHS) clone libraries derived from fecal DNA samples. FHS DNA copy numbers were quantified using real-time polymerase chain reaction. Results: A wide variety of FHS sequences was recovered from animals in both treatments. No differences in FHS clone libraries between the HI and LI groups were found. During the experimental period, no significant differences in the proportion of FHS copy numbers were observed between the two treatment groups. Conclusion: This is the first reported molecular diversity analysis using specific homoacetogen marker genes from the large intestines of pigs. There was no observable effect of feed intake on acetogen diversity.

• 한국수소및신에너지학회논문집
• /
• 제25권3호
• /
• pp.219-226
• /
• 2014

In HI decomposition, $Pt/Al_2O_3$ has been studied by several researchers. However, after HI decomposition, it could be seen that metal dispersion of $Pt/Al_2O_3$ was greatly decreased. This reason was expected of platinum loss and sintering, which platinum was aggregated. Also, this decrease of metal dispersion caused catalytic deactivation. This study was conducted to find the condition to minimize platinum sintering and loss. In particular, heat treatment atmosphere and temperature were examined to improve the activity of HI decomposition reaction. First of all, although $Pt/Al_2O_3$ treated in hydrogen atmosphere had low platinum dispersion between 13 and 18%, it was shown to suitable platinum form that played an important role in improving HI decomposition reaction. Oxygen in the air atmosphere made $Pt/Al_2O_3$ have high platinum dispersion even 61.52% at $500^{\circ}C$. Therefore, in order to get high platinum dispersion and suitable platinum form in HI decomposition reaction, air heat treatment at $500^{\circ}C$ was needed to add before hydrogen heat treatment. In case of 5A3H, it had 51.13% platinum dispersion and improved HI decomposition reaction activity. Also, after HI decomposition reaction it had considerable platinum dispersion of 23.89%.

• 한국치위생학회지
• /
• 제10권3호
• /
• pp.531-540
• /
• 2010

Objectives : In this study, following the cavity restorations with low copper conventional alloy, high copper admixed one and high copper unicompositional one, which are used the most frequently in a clinical setting at the present, to experiment the time-dependent changes of strength, bubbles were examined. Besides, to examine the detrimental effects of mercury contained in dental amalgam, the amount of mercury release was evaluated. Methods : As dental amalgams which were used herein, [BESTALOY], [Hi-Aristaloy 21] and [Sybraloy] were selected for a low-copper conventional amalgam, a high-copper admixed one and a high-copper unicompositional one in the corresponding order. The formation of bubbles and the weight ratio of mercury release were evaluated using a field emission scanning electron microscope (FE-SEM). Thus, the following results were obtained: Results : 1. The time-dependent amount of mercury release reached a statistical significance in three types of alloys, which was shown in such a descending order as [BESTALOY], [Hi-Aristaloy 21] and [Sybraloy]. 2. A low-copper conventional type, BESTALOY is a cutting type and it was found to have an increased formation of fine bubbles. In the remaining two types, [Hi-Aristaloy 21] (a high-copper admixed alloy) and [Sybraloy] (a high-copper unicompositional alloy), the time-dependent changes in the formation of bubbles was negligible. Conclusions : Accordingly, this type of mercury release from amalgam alloy denotes the difference in the weight ratio of total constituents between after 24 hours and after two weeks. But further studies are warranted to examine the amount of mercury release which is detrimental to human bodies. Besides, a low-copper conventional alloy is a cutting type and it was characterized by the abundant formation of bubbles in a time-dependent manner. This implies that the strength of amalgam is impaired, which should be considered in selecting the appropriate amalgam alloy in a clinical setting.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2005년도 추계 총회 및 학술발표회
• /
• pp.119-123
• /
• 2005

The thermochemical splitting of water has been proposed as a clean method for hydrogen production. The IS process is one of the thermochemical water splitting processes using iodine and sulfur as reaction agents. HI decomposition procedure to obtain hydrogen is one of the key operations in the process, because equilibrium conversion of HI is low (22% at $450^{\circ}C$). The silica membranes prepared by CVD. method were applied to the decomposition reaction of HI vapor. The permeation characteristics of hydrogen and nitrogen belong to the Knudsen flow pattern.

• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.279-286
• /
• 2020

In this article, we develop a reactive distillation (RD) column configuration for the production of hydrogen. This RD column is in the HI decomposition section of the sulphur - iodine (SI) thermochemical cycle, in which HI decomposition and H₂ separation take place simultaneously. The section plays a major role in high hydrogen production efficiency (that depends on reaction conversion and separation efficiency) of the SI cycle. In the column simulation, the rigorous thermodynamic phase equilibrium and reaction kinetic model are used. The tuning parameters involved in phase equilibrium model are dependent on interactive components and system temperature. For kinetic model, parameter values are adopted from the Aspen flowsheet simulator. Interestingly, there is no side reaction (e.g., solvation reaction, electrolyte decomposition and polyiodide formation) considered aiming to make the proposed model simple that leads to a challenging prediction. The process parameters are determined on the basis of optimal hydrogen production as reflux ratio = 0.87, total number of stages = 19 and feeding point at 8th stage. With this, the column operates at a reasonably low pressure (i.e., 8 bar) and produces hydrogen in the distillate with a desired composition (H₂ = 9.18 mol%, H₂O = 88.27 mol% and HI = 2.54 mol%). Finally, the results are compared with other model simulations. It is observed that the proposed scheme leads to consume a reasonably low energy requirement of 327 MJ/kmol of H₂.

• 천문학회지
• /
• 제32권1호
• /
• pp.41-53
• /
• 1999

We have carried out high-resolution observations along one-dimensional cuts through the three Galactic super-shells GS 064-01-97, GS 090-28-17, and GS 174+02-64 in the HI 21 cm and CO J=l-0 lines. By comparing the HI data with IRAS data, we have derived the distributions of the $I_{100}$ and $T_{100}$ excesses, which are, respectively, the 100 ${\mu}m$ intensity and 100 ${\mu}m$ optical depth in excess of what would be expected from HI emission. We have found that both the $I_{100}$ and $T_{100}$ excesses have good correlations with the CO integrated intensity W co in all three supershells. But the $I_{100}$ excess appears to underestimate $H_2$ column density N($H_2$) by factors of 1.5-3.8. This factor is the ratio of atomic to molecular infrared emissivities, and we show that it can be roughly determined from the HI and IRAS data. By comparing the $T_{100}$ excess with $W_{co}$, we derive the conversion factor X $\equiv$ N ($H_2$) /$W_{co}{\simeq}$ 0.26 - 0.66 in the three supershells. In GS 090- 28-17, which is a very diffuse shell, our result suggests that the region with N($H_2$) $\le$ $3 {\times} 10^{20} cm^{-2}$ does not have observable CO emission, which appears to be consistent with previous results indicating that diffuse molecular gas is not observable in CO. Our results show that the molecular gas has a 60/100 ${\mu}m$ color temperature $T_d$ lower than the atomic gas. The low value of $T_d$ might be due either to the low equilibrium temperature or to the lower abundance of small grains, or a combination of both.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2315-2320
• /
• 2007

This paper presents an investigative study on the efficacy of a new physical water treatment (PWT) technology using an oscillating electric field to mitigate mineral fouling in heat exchangers. Parallel graphite electrode plates immersed in water were used to generate the electric field directly in water. Artificial hard water at 500 ppm hardness was used in all fouling tests. The inlet temperatures were maintained at 23.5${\pm}$0.5$^{\circ}C$ and 85${\pm}$0.5$^{\circ}C$ for cold and hot water sides, respectively. The results at a cold water-side velocity of 0.3 m/s showed a 16-60% drop in fouling resistances from the baseline test depending on the frequency of the electric field for the PWT-treated cases.

• Journal of Nutrition and Health
• /
• 제39권3호
• /
• pp.219-224
• /
• 2006

This study was performed to determine the effect of soy isoflavones on brain development and function in rats. Forty Sprague-Dawley male rats were provided diets containing different levels of soy isoflavones for 6 weeks; 0 ppm (control), 50 ppm (low isoflavone intake; LI), 250 ppm (medium isoflavone intake; MI) and 500 ppm (high isoflavone intake; HI). Learning ability was evaluated by a Y-shaped water maze and the activity of acetylcholinesterase in brain was assayed after decapitation. Food intake and body weights as well as weights of brain, liver, spleen, heart and kidney showed no significant difference among the four groups, which means 500 ppm of isoflavones is safe. In the water maze test, the frequency of error counted when rats entered one end of the alley without platform was significantly lower in the HI group than in the control group, and the escape latency as swim time taken to escape on the hidden platform was significantly shorter in the HI group than in the LI and control groups. The activity of acetylcholinesterase of the brain was significantly higher in the HI and MI groups than in the control group. Therefore, the results indicate that isoflavones may improve the cognitive function without adverse effects.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1401-1407
• /
• 2002

This paper represents an investigation of the vehicle-to-vehicle distance control system using Hardware-in-the-Loop Simulation(HiLS). Control logic is primarily developed and tested with a specially equipped test vehicle. Establishment of an efficient and low cost development tool is a very important issue, and test vehicle approach is costly and time consuming. HiLS method is useful in the investigation of driver assistance and active safety systems. The HiLS system consists of a stepper motor for throttle control, a hydraulic brake system with an electronic vacuum booster, an electronic controller unit, a data logging computer which are used to save vehicle states and signals of actuator through a CAN and a simulation computer using mathematical vehicle model. Adaptation of a CAN instead of RS-232 Serial Interface for communication is a trend in the automotive industry. Since this environment is the same as a test vehicle, a control logic verified in laboratory can be easily transferred to a test vehicle.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1997년도 Proceedings International Workshop on New Video Media Technology
• /
• pp.95-100
• /
• 1997

In this paper, we report a system specifications of Hi-resolution and four-screen stereo image projection system which was established in VBL(Venture Business Laboratory) at Tokyo Institute of Technology on 3rd July 1996. The system is 3m $\times$ 3m $\times$2.2m rectangular parallelepiped composed of three 150inch side screens and floor. Host computers can generate virtual environment s in real-time and four projecters project these images to the screens. Viewers are, therefore, surrounded by these screens and an illusion of immersion can be created. Because, the views of users are completely covered with the projection images and many kinds of interactive devices can be used in this system. Moreover, many users can have experience the virtual environments at the same time. Usually, this kind of system uses hi-performance graphics workstations for host computers. One is SGI(Silicon Graphics, Inc.) Onyx with 3 Reality Engines. The other system is 4 personal computers. Because hi-performance and low price graphics accelerators for personal computer have been developed in these years, the abilities of VR(Virtual Reality) systems based on personal computers should be investigated.