• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.217-222
• /
• 1992

An attempt was made to analyze green microstructure of AIN samples prepared by slip casting and dry pressing through Hg-porosimetry. Slip cast samples with narrow pore size distribation and high packing density showed higher sinterability and homogeneous distribution of second phase(s). Hg-porosimetry is and effective way to determine pore structure if "ink bottle" phenomenon does not occur. A comparison study with porosity measurement by quantitative microscopy showed that the effectiveness of Hg-porosimetry measurement could be extended to higher sintered density as long as pores remained open.

• Journal of Energy Engineering
• /
• v.7 no.1
• /
• pp.73-80
• /
• 1998

Zinc titanate sorbents were prepared and regeneration of used sorbents for high temperature desulfurization of fuel gases was studied. Zn/Ti molar ratio of prepared sorbents was 1.5 and quartz fixed-bed reactors with 1 cm and 3 cm diameters were used. Regeneration of zinc titanate sorbents at high temperature is exothermic reaction; that brings about deterioration of sorbents. Therefore, we experimented regeneration reaction of zinc titanate sorbents for the purpose of obtaining the most suitable regeneration conditions by changing experimental parameters such as reaction temperature, oxygen concentration, flow rate and steam content. $H_2S$ and $SO_2$ breakthrough curves were obtained during desulfurization-regeneration. Also, properties of the sorbents before and after regeneration were analyzed using SEM, XRD, Hg-porosimetry and BET method. From such results, we obtained the most suitable regeneration conditions including regeneration temperature of 650$^{\circ}$C, $O_2$ content of 5% and steam content of 10% in the gas stream.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2016

Highly porous polymethyl methacrylate (PMMA) microspheres impregnated by $TiO_2$ powder were prepared by spray drying method. The particle size and the porosity were controlled by optimizing the co-solvent ratio and the polymer concentration. $TiO_2$ powder was impregnated into the microspheres upto 74.6 wt% content based on the weight of the resultant $PMMA/TiO_2$ microspheres. SEM images showed that $TiO_2$ powder was well distributed throughout the inside of the microsphere. EDX mapping showed that the Ti signal was well detected from every part of the microspheres, which was the evidence of the formation of the $PMMA/TiO_2$ composite. Hg porosimetry result showed that the porosity was found to be over 50% regardless of the $TiO_2$ contents. The final product was found to have high oil-absorbing capacity and great hiding power, both of which are key properties in designing the microsphere materials for make-up cosmetics application.