• Title/Summary/Keyword: Hexapod Walking Robot

검색결과 18건 처리시간 0.024초

빠른 보행이 가능한 6족 로봇 (A Hexapod Robot that can Walk Fast)

  • 서현세;성영휘
    • 전기학회논문지
    • /
    • 제62권4호
    • /
    • pp.536-543
    • /
    • 2013
  • In this paper, we propose a new type of hexapod robot that can walk fast. Most of the conventional hexapod robots are either rectangular type of hexagonal type. Those robots have drawbacks in the speed and stability of walking. The proposed robot has six legs, one fore leg, one hind leg, two left legs and two right legs. The proposed robot forms relatively wide supporting polygons along the walking direction, so it can walk very fast stably. We implemented the proposed hexapod robot and showed the feasibility of the robot by 3+3 walking experiment and 2+4 walking experiment.

관절고착고장에 대한 육각 보행 로봇의 내고장성 걸음새 생성 (Fault-Tolerant Gait Generation of Hexapod Robots for Locked Joint Failures)

  • 장정민
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제54권3호
    • /
    • pp.131-140
    • /
    • 2005
  • Fault-tolerant gait generation of a hexapod robot with crab walking is proposed. The considered fault is a locked joint failure, which prevents a joint of a leg from moving and makes it locked in a known position. Due to the reduced workspace of a failed leg, fault-tolerant crab walking has a limitation in the range of heading direction. In this paper, an accessible range of the crab angle is derived for a given configuration of the failed leg and, based on the principles of fault-tolerant gait planning, periodic crab gaits are proposed in which a hexapod robot realizes crab walking after a locked joint failure, having a reasonable stride length and stability margin. The proposed crab walking is then applied to path planning on uneven terrain with positive obstacles. i.e., protruded obstacles which legged robots cannot cross over but have to take a roundabout route to avoid. The robot trajectory should be generated such that the crab angle does not exceed the restricted range caused by a locked joint failure.

6족 보행 로봇에서의 최적 머니퓰레이션 (Optimal Manipulation for a Hexapod Walking Robot)

  • 서현세;성영휘
    • 융합신호처리학회논문지
    • /
    • 제16권4호
    • /
    • pp.168-174
    • /
    • 2015
  • 보행 로봇의 궁극적인 목적은 원하는 장소로 이동한 후에 적절한 작업을 수행하는 데 있다. 보행 로봇이 임의의 작업을 수행하기 위해서는 보행을 위한 다리뿐만 아니라 별도의 머니퓰레이터를 갖추고 있어야 하지만 작업의 난이도가 높지 않은 특정 작업을 수행하는 데에는 굳이 머니퓰레이터를 갖추지 않더라도 보행에 사용하는 다리를 이용하여 작업을 수행할 수도 있다. 다리를 가지고 이동하는 보행 로봇 중에서 6족 보행 로봇은 안정적이고 빠른 보행이 가능한 장점이 있으며 다리의 수가 상대적으로 많으므로 로봇의 보행 및 정지 시 균형 유지를 용이하게 할 수 있고 균형 유지에 사용되지 않는 여분의 다리를 이용하여 특정 작업을 수행할 수 있는 장점이 있다. 본 연구에서는 6족 보행 로봇이 3차원 공간상에서 주어지는 공의 위치로 이동하여 공을 잡는 작업을 여유자유도 로봇 문제로 재구성하고 이를 해석하여 최적해를 구하는 방법을 제안한다.

지능형 6족 보행 로봇의 개발 (Development of an Intelligent Hexapod Walking Robot)

  • 서현세;성영휘
    • 융합신호처리학회논문지
    • /
    • 제14권2호
    • /
    • pp.124-129
    • /
    • 2013
  • 6족 보행 로봇은 2족 또는 4족 보행 로봇에 비하여 안정적인 보행이 가능한 장점이 있다. 따라서 6족 보행 로봇은 이러한 보행의 안정성을 기반으로 다양한 지능적인 동작을 수행하기에 유리한 구조이다. 본 논문에서는 전형적인 6족 보행 로봇과는 달리 로봇의 진행 방향에 대하여 전후 다리와 좌우에 각각 한 쌍의 다리를 갖는 6족 보행 로봇을 제안하고 제안된 로봇을 사용하여 다양한 지능형 동작을 수행한다. 26개의 모듈형 모터를 사용하여 로봇 기구부를 구성하고 호스트 PC, DSP 주제어기, AVR 보조 제어기, 스마트폰/스마트패드로 구성되는 제어기를 구현한다. 구현된 로봇은 스테레오 카메라, 적외선 센서, 초음파 센서, 접촉 센서 등 다양한 센서 데이터를 사용하여 비평탄면 보행, 공차기, 원격 제어 및 3차원 모니터링 등 다양한 지능형 동작을 수행할 수 있음을 실험을 통하여 검증한다.

스테레오 비전을 이용한 6 족 로봇의 장애물 회피를 위한 국소맵 빌딩 및 경로생성에 관한 연구 (A Study on Stereo Vision-based Local Map Building and Path Generation for Obstacle Avoidance of the Hexapod Robot)

  • 노경곤;김진걸
    • 한국정밀공학회지
    • /
    • 제27권7호
    • /
    • pp.36-48
    • /
    • 2010
  • This paper is concerned with stereo vision-based approach to detect obstacles and to generate the path of destination from the start. The hexapod robot in the experiment is cable of walking by legs and driving by wheels simultaneously. The hexapod robot operates under the driving mode normally, and it changes driving mode to walking mode to overcome obstacles using its legs. Disparity map, which is the correlation between two images taken by stereo camera, is employed for calculation of the distance between the robot and obstacles. When the obstacles information is extracted from the disparity map, the potential field algorithm is applied to create the obstacle-avoidance path. Simulator, based on OpenGL, is developed to generate the graphical path, and the experimental results are shown for the verification of the proposed algorithm.

고령자 보행 지원을 위한 지능형 6족 로봇 (Intelligent Hexapod robot for the support walking of the aged)

  • 이상무;김상훈
    • 한국HCI학회:학술대회논문집
    • /
    • 한국HCI학회 2008년도 학술대회 1부
    • /
    • pp.534-539
    • /
    • 2008
  • 본 논문은 시력이 떨어지고 보행이 불편한 고령자의 이동을 지원하는 지능형 6족 이동 로봇에 대한 연구이다. 센서 및 소형카메라를 장착한 6족 지능형 이동 로봇은 다양한 보행 및 회전, 이동 속도 조절 등의 이동 능력과 다양한 센서를 이용한 장애물 회피, 위협 상황 인식, 경사보행, 물체영역의 인식 및 추적 등의 기능을 가지며, 로봇에 연결된 선을 이용해 고령자의 보행을 유도한다. 로봇의 안정된 보행을 위한 모터의 제어방법, 센서 및 영상인식을 통한 로봇의 환경인식, 그에 따른 로봇의 지능적이고 능동적인 대응, 감지된 환경정보를 신속하게 무선통신을 통해 필요한 고령자 또는 보호자에게 전송하는 방법 등을 구현하였다. 한 다리에 3자유도를 가진 18관절 6족 로봇으로 구현되어 비평탄 지형에서도 안정된 보행구현은 물론 다양하고 부드러운 동작을 취할 수 있으며 강력한 구동 능력을 위해 디지털 슈퍼토크 서보모터를 사용하였고, 위험 상황 인식을 위해 3축 가속도 센서, PIR(초전)센서, 불꽃센서, 연기센서, 적외선, 초음파 거리감지 센서, 조도센서, 터치센서, 온도/습도 센서, 음성인식센서와 카메라를 통한 영상인식 등을 센서 융합에 의해 구현함으로써 상황인식의 정확도를 높이고 고령자들의 길안내 시 위험을 조기에 예측하여 전달하는 에이전트 역할을 수행하도록 설계되었다.

  • PDF

6족 보행로봇에 관한 기초연구 (A Basic Study of Hexapod Walking Robot)

  • 강동현;민영봉;반전훈구;매전간웅
    • Journal of Biosystems Engineering
    • /
    • 제32권5호
    • /
    • pp.339-347
    • /
    • 2007
  • A hexapod walking robot had been developed for gathering information in the field. The developed robot was $260{\times}260{\times}130$ ($W{\times}L{\times}H$, mm) in size and 14.7 N in weight. The legs had nineteen degrees of freedom. A leg has three rotational joints actuated by small servomotors. Two servomotors placed at ankle and knee played the roles of vertical joint for up and down motions of the leg and the other one placed at coxa played the role of horizontal joint for forward and backward motions. In addition, a servomotor placed at thorax between the front legs and the middle legs played the role of vertical joint for pumping the two front legs to climb stair or inclination. Walking motion of the robot was executed by tripod gait. The robot was controlled by manual remote-controller communicated by an infrared ray. Two controllers were equipped to control the walking of the robot. The sub-controller using PIC microcomputer (Microchips, PIC16F84A) received the 16 bit command signal from the manual remote controller, decoded it to 8bit and transmitted it to the main microcomputer (RENESAS, SH2/7045), which controlled the 19 servomotors using the PWM command signals. Walking speeds were controlled by adjusting the period of command cycle and the stride. Forward walking speed were within 100 cm/min to 300 cm/min. However, experimental walking speed had the error of 4-40 cm/min to compare with the theoretical one, because of slippage of the leg and the circular arc motion of servomotor of coxa.

오프로드 환경에서 효율적인 6족 로봇 보행 시스템 개발 (Development of an Effective Walking System for a Hexapod Robot on Uneven Terrain)

  • 김준우;이기원;이석규
    • 제어로봇시스템학회논문지
    • /
    • 제19권12호
    • /
    • pp.1152-1159
    • /
    • 2013
  • This paper proposes an effective walking system for a hexapod robot on uneven terrain. To overcome the deficiencies of two-pair walking systems, which are effective on even terrain, the use of only three legs changes the steps required for movement. The proposed system receives feedback data from switches attached to the bottom of the legs and gyro sensor to carry out stable walking using the Bezier curve algorithm. From the coordinates of the Bezier curve, which guarantees the circular motion of legs, the motor's angle value can be obtained using inverse kinematics. The angle values are sent to each motor though RS-485 communication. If a switch is pushed by the surface during navigation in the Bezier curve pattern, the robot is designed to change its circular course. Through the changed course, each leg can be located on an optimal surface and the wobble phenomenon is reduced by using a normal vector algorithm. The simulation and experiment results show the efficiency of the proposed algorithm.

교착 회피를 고려한 내고장성 세다리 걸음새 (Fault-Tolerant Tripod Gaits Considering Deadlock Avoidance)

  • 노지명;양정민
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제53권8호
    • /
    • pp.585-593
    • /
    • 2004
  • Fault-tolerant gait planning in legged locomotion is to design gaits with which legged robots can maintain static stability and motion continuity against a failure in a leg. For planning a robust and deadlock-free fault-tolerant gait, kinematic constraints caused by a failed leg should be closely examined with respect to remaining mobility of the leg. In this paper, based on the authors's previous results, deadlock avoidance scheme for fault-tolerant gait planning is proposed for a hexapod robot walking over even terrain. The considered fault is a locked joint failure, which prevents a joint of a leg from moving and makes it locked in a known position. It is shown that for guaranteeing the existence of the previously proposed fault-tolerant tripod gait of a hexapod robot, the configuration of the failed leg must be within a range of kinematic constraints. Then, for coping with failure situations where the existence condition is not satisfied, the previous fault-tolerant tripod gait is improved by including the adjustment of the foot trajectory. The foot trajectory adjustment procedure is analytically derived to show that it can help the fault-tolerant gait avoid deadlock resulting from the kinematic constraint and does not make any harmful effect on gait mobility. The post-failure walking problem of a hexapod robot with the normal tripod gait is addressed as a case study to show the effectiveness of the proposed scheme.

자율 보행 로봇을 위한 내고장성 제어 (Fault Tolerance in Control of Autonomous Legged Robots)

  • 양정민
    • 제어로봇시스템학회논문지
    • /
    • 제9권11호
    • /
    • pp.943-951
    • /
    • 2003
  • A strategy for fault-tolerant gaits of autonomous legged robots is proposed. A legged robot is considered to be fault tolerant with respect to a given failure if it is guaranteed to be capable of walking maintaining its static stability after the occurrence of the failure. The failure concerned in this paper is a locked joint failure for which a joint in a leg cannot move and is locked in place. If a failed joint is locked, the workspace of the resulting leg is constrained, but legged robots have fault tolerance capability to continue static walking. An algorithm for generating fault-tolerant gaits is described and, especially, periodic gaits are presented for forward walking of a hexapod robot with a locked joint failure. The leg sequence and the formula of the stride length are analytically driven based on gait study and robot kinematics. The transition procedure from a normal gait to the proposed fault-tolerant gait is shown to demonstrate the applicability of the proposed scheme.