• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.110-114
• /
• 2006

The high-solid coatings were prepared by blending the synthesized acrylic resin in the previous paper, and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. The $60^{\circ}$ specular gloss, impact resistance, cross-hatch adhesion, and heat resistance of the films proved to be good, and the pencil hardness, drying time, and pot-life proved to be slightly poor. From a viscoelastic measurement using a rigid-body pendulum, curing was accelerated with the Tg value.

• 한국기계가공학회지
• /
• 제13권3호
• /
• pp.35-41
• /
• 2014

Poly(g-glutamic acid) (g-PGA) is a very promising biodegradable polymer that is produced by microorganism of Bacillus subtilis. Because g-PGA is water-soluble, anionic, biodegradable, and even edible, its potential applications have been studied from an industrial standpoint. In this study, we fabricated porous g-PGA foams by means of a freeze-solvent extraction method for tissue-engineering applications. Porous g-PGA foams were chemically cross-linked using a hexamethylene diisocyanate solution. An aqueous basic solution was used to neutralize g-PGA foam for cell culturing. During an in vitro cell culture study, it was observed that primary rabbit ear chondrocytes were well at tached and spread over the surface oft hree-dimensional cross-linkedg-PGA foam. From these results, it is concluded that cross-linkedg-PGA foam is aprom is in gmaterial for tissue-engineering applications, especially those pertaining to the regeneration of human cartilage.

• 통합자연과학논문집
• /
• 제11권2호
• /
• pp.113-120
• /
• 2018

This study was planned to prepare the high strength hydrogel ophthalmic lens containing isocyanate group and nanoparticles. HDI with carbon nanoparticles were used as additives for the basic combination of HEMA, MA and MMA, and the materials were copolymerized with EGDMA as the cross-linking agent and AIBN as the initiator. The mixture was heated at $100^{\circ}C$ for an hour to produce the high performance hydrogel ophthalmic lens by cast mold method. Measurement of the physical characteristics of the produced material showed that the refractive index was in the range of 1.4027~1.4600, water content 25.21~44.01%, contact angle $54.18{\sim}72.94^{\circ}$, visible light transmittance 53.03~92.09%, and tensile strength 0.1024~0.2359 kgf and breaking strength was 0.0872~0.2825 kgf. The results showed an increase of refractive index while the decrease in water content. And also, the breaking strength was highest when the addition ratio of HDI was 5%(wt). As a result of the absorbance measurement, no significant difference was observed in all the samples, so it can be judged that the stabilization of nanoparticles in the polymer was maintained.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.660-666
• /
• 2009

Thermoplastic polyurethane elastomer(PU-TPE) and energetic thermoplastic polyurethane Elastomer(E-PU-TPE) were prepared from Hexamethylene diisocyanate(HDI), 1,4-BD/AA ester polyol and glycidyl azide polymer(GAP-2400) as an energetic material by the addition polymerization. The PU-TPE and E-PU-TPE were characterized by FT-IR and GPC. Viscometer, DSC and UTM were used to investigate the viscose behavior with a various solvent, thermal properties and mechanical properties of PU-TPE and E-PU-TPE, which are of potential interest for the development of high performance binder of energetic solid propellants. It was found that $M_w$ of PU-TPE and E-PU-TPEs are over 100,000 and decreased with increase of GAP-2400 contents. $T_m$ and ${\Delta}H$ as thermal properties decreased and also tensile strength and elongation at break as mechanical properties decreased with increase of GAP-2400 contents.

• 한국염색가공학회지
• /
• 제27권3호
• /
• pp.184-193
• /
• 2015

In this study, dye encapsulated microcapsules were produced by polyurethane prepolymer synthesis method using hexamethylene diisocyanate, ethylene glycol and methyl ethyl ketone. The study showed that the average size of microcapsules were $4.697{\mu}m$ in normal distribution. These microcapsules were induced red color by thermochromic fluoran red dye with showing color change as temperature. After the textile finishing of microcapsules, durability of microcapsules were checked as crocking times and lightfastness. The microcapsules were pressed at protrusion of textile weave in 10 crocking times which meant that the microcapsules not fallen off. Lightfastness was acceptable giving rating 4. It means that the polyurethane microcapsules not affect to light durability.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2408-2413
• /
• 2012

불소를 함유하는 다기능성 함불소고분자의 가교화 반응을 위하여 페놀로 blocking된 HMDI를 사용하고 반응의 촉진을 위하여 주석계 촉매(stanous catalyst)를 사용하여 DSC 및 TGA를 사용하여 반응에 미치는 촉매의 영향을 살펴보았다. 용매 및 HMDI의 blocking제로 사용된 페놀이 약 $150^{\circ}C$에 이르기까지 해리되면서 휘발하게 되고 $230-250^{\circ}C$ 온도에서 가교 생성반응이 이루어지는 것이 관찰되었다. 촉매의 농도에 따른 반응기구의 변화는 없는 대신 촉매가 도입될 경우 100배 이상 빨라지는 급격한 반응속도의 변화가 관찰되었으며, 이에 따른 활성화 에너지는 비촉매계에 대한 81.8 kJ/mol로부터 1 phr 촉매계의 대하여 61.7 kJ/mol까지 감소하는 것이 관찰되었다.

• 한국응용과학기술학회지
• /
• 제25권2호
• /
• pp.151-159
• /
• 2008

The flame-retardant coatings were prepared by blending the synthesized triphosphorus modified polyester in the previous paper and hexamethylene diisocyanate-trimer and curing it at room temperature. The characterization of the films of the prepared coatings was performed. It was confirmed that no deterioration of physical properties of PU coatings was observed with the increasing phenylphosphonic acid (PPA) contents. Flame retardancy was tested by a $45^{\circ}$ Meckel burner method and LOI method. With the $45^{\circ}$ Meckel burner method, CATBTP-20C and CATBTP-30C that contain 20 wt% and 30 wt% of PPA, flame retarding component, respectively, showed the first grade flame retardancy with $2.8{\sim}3.9\;cm$ of char length ; and, with LOI method, they exhibited a good flame retardancy as a range of $30{\sim}32%$ of combustion values.

• Tuberculosis and Respiratory Diseases
• /
• 제39권6호
• /
• pp.490-501
• /
• 1992

TDI 기관지 유발검사상 TDI-천식으로 확진된 환자 22명을 대상으로 이들의 임상적 특징에 관한 고찰과 함께 메타콜린 기관지유발검사 및 TDI-, MDI-, HDI-HSA conjugate에 대한 특이 IgE 항체를 측정하여 다음과 같은 결과를 얻었다. 1) TDI 기관지유발검사상에서는 조기 반응형이 11예(50%), 후기단독 반응형이 6예(27%), 그리고 이중 반응형이 5예(23%)였다. 2) 메타콜린 기관지유발검사상 19예(86.4%)가 양성반응을, 3예(13.6%)가 음성반응을 보였으며, 이들 음성반응자들은 TDI 기관지유발검사 24시간후에 다시 시행한 메타콜린 기관지유발검사에서는 기도과민성을 나타내었다. 3) Isocyanate에 대한 특이 IgE 항체의 측정 결과 TDI-HSA에 대해서는 12예(54.5%), MDI-HSA에 대해서는 7예(31.8%), 그리고 HDI-HSA conjugate에 대해서는 9예(40.9%)가 양성반응을 보였으며, 특이 IgE의 양성률은 잠복기, 아토피유무 및 흡연상태와는 상관관계가 없었다. 4) 추적검사가 가능했던 12예에서 기도과민증의 호전을 보였던 예는 8예였는데, 이 중 7예는 isocyanate 노출에의 회피가 가능했던 경우였고 1예는 계속적으로 노출되어 있었음에도 불구하고 호전된 경우였으며, 악화되었던 4예 중 2예는 계속적으로 노출되어 있었던 경우, 그리고 2예는 회피에도 불구하고 악화을 보인 경우였다. 이상의 결과로 isocyanate에 의한 직업성 천식 환자의 59.1%에서 IgE 매개에 의한 기관지 수축반응이 의심되었으며, 메타콜린 기관지유발검사상 음성반응을 보인다고 하더라도 병력상 isocyanate에 의한 직업성 천식이 의심되면 isocyanate-기관지유발검사를 시행하고 그 이후 지도 과민증의 변화를 관찰하는 것이 진단에 유용할 것으로 여겨진다.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.95-102
• /
• 2011

An amphiphilic cationic branched methoxy poly (ethylene glycol)-branched polyethylenimine - poly(L-phenylalanine) (mPEG-bPEI-pPhe) block copolymer was successfully synthesized by ring-opening polymerization (ROP) of N-carboxyanhydride of L-phenylalanine (Phe-NCA) with mPEG-bPEI for the preparation of more stable polyelectrolyte complex (PEC) included a hydrophobic interaction. mPEG-bPEI was firstly prepared by the coupling of mPEG and bPEI using hexamethylene diisocyanate (HMDI). The structural properties of mPEG-bPEI-pPhe copolymers were confirmed by $^1H$ NMR. The copolymers exhibited a self-assemble behavior in water above critical aggregate concentration (CAC) in the range of 0.01-0.14 g/L. The CAC of copolymers obviously depended on the hydrophobic block content in the copolymers (the value decreased with the increase of the pPhe block content). The cationic copolymers have the ability to form multi-interaction complex (MIC) with bovine serum albumin (BSA) and plasmid DNA through multi-interaction (electrostatic and hydrophobic interaction). The physicochemical characterization of the complex was carried out by the measurement of zeta potential and particle size. Their zeta-potentials were positive (approximately +10 mV) and their sizes decreased with increasing pPhe contents in the copolymers (PPF/BSA wt% ratio = 2). The complex showed good stability at high ionic strength. Therefore, mPEG-bPEI-pPhe block copolymer was considered as a potential material to enhance the stability of complex including biotherapuetic drugs.

• 한국응용과학기술학회지
• /
• 제23권1호
• /
• pp.77-84
• /
• 2006

Modified polyesters (TTBA-10C, -20C, -30C) that contain phosphorus and chlorine were synthesized by the condensation polymerization of tetramethylene bis(orthophosphate), neohexanediol trichlorobenzoate, 1,4-butanediol and adipic acid, in which tetramethylene bis(orthophosphate) and neohexanediol trichlorobenzoate were prepared previously in our laboratory. In this study, two-component flame-retardant polyurethane coatings (TTBA-10C/HDI-trimer=TTHD-10C, TTBA-20C/ HDI-trimer= TTHD-20C, TTBA-30C/HDI-trimer= TTHD-30C) were obtained by curing at room temperature with the synthesized TTBAs and hexamethylene diisocyanate (HDI)-trimer as a curing agent. The obtained TTHDs were made into coating samples and used as test samples for various physical properties. The physical properties of the flame-retardant coatings containing chlorine and phosphorus groups were generally inferior to those containing only phosphorus group. Flame retardancy was tested by vertical and horizontal combustion method, and $45_{\circ}$ Meckel burner method. Since the retardancy of flame-retardant coatings containing chlorine and phosphorus groups was better than that containing only phosphorus group, it could be concluded that the retardancy by the synergism effect of chlorine and phosphorus groups exhibited.