• 월간산업보건
• /
• s.102
• /
• pp.43-48
• /
• 1996

최근 Isocyanate의 일종으로 Hexamethylene diisocyanate(HDI)가 사용되고, 주로 자동차의 도장공을 중심으로 천식이나 과민성 폐장염의 보고가 증가하고 있다. 과거 20년에 걸친 주된 문헌을 요약해 보았다.

• Elastomers and Composites
• /
• v.41 no.2
• /
• pp.108-115
• /
• 2006

A series of thermotropic polyurethanes containing biphenyl units was synthesized by polyaddition reaction of diisocyanates such as 2,6-tolylene diisocyanate, 2,5-tolylene diisocyanate, 2,4-tolylene diisocyanate, 1,4-phenylene diisocyanate, and hexamethylene diisocyanate with 4,4'-Bis(9-hydroxynonoxy)biphenyl (BP9). 4,4'-bis(9-hydroxynonoxy)biphenyl exhibited a smectic type mesophase. Mesophase was found for all synthesized liquid crystalline polyurethanes except 1,4-PDI/BP9 based polyurethane. Structures of the monomer and the corresponding polymers were identified using FT-IR and $^1H-NMR$ spectroscopies. Their phase transition temperatures and thermal stability were also investigated by differential scanning calorimetry and optical polarizing microscopy.

• Journal of the Korean Chemical Society
• /
• v.56 no.5
• /
• pp.597-602
• /
• 2012

The copolymerization of triacetoxyvinylsilane, EGDMA (ethylene glycol dimethacrylate as a cross-linker), HEMA (2-hydroxyethyl methacrylate), MMA (methyl methacrylate), MA (methacrylic acid) was performed in the presence of AIBN (2,2'-azobisisobutyronitrile) as an initiator. Measurement of the physical properties of the resulting copolymers showed that water content, refractive index, visible ray transmittance, and tensile strength were in the range of 35.63~32.44%, 1.4382~1.4480, 89.0~92.5% and 0.346~0.674 kgf, respectively. The values of tensile strength of copolymers-containing hexamethylene diisocyanate were higher than those of the copolymers containing triacetoxyvinylsilane. From the results we came to the conclusion that the produced copolymers are suitable for the application of ophthalmic contact lens with high tensile strength, wettability and duraility.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.273-280
• /
• 2004

Acrylic resins (ethyl methacrylate-2-hydroxypropyl methacrylate-n-butyl acrylate-acrylic acid EHBCs) containing 80％ of solid were synthesized. Then, high-solid coatings (ethyl methacrylate-2-hydroxypropyl methacrylate-n-butyl acrylate-acrylic acid/hexamethylene diisocyanate-biuret : EHBCNs) were prepared by curing of the acrylic resin with curing agent hexamethylene diisocyanate-biuret at room temperature. The cure time of prepared coatings EHBCN-4 (EHBC-4 : $T_{g}$ = $0^{\circ}C$) and EHBCN-7 (EHBC-7 : $T_{g}$ = 3$0^{\circ}C$), measured by rigid-body pendulum method, was recorded 6.2 hours and 4.5 hours, respectively. Dynamic viscoelastic experiment revealed the glass transition temperature of EHBCN-4 and EHBCN-7 to be $14^{\circ}C$ and $39^{\circ}C$, respectively. It was found that the adhesion and flexural properties among various properties of coatings were enhanced by the incorporation of caprolactone acrylate monomer into the acrylic resins.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.615-620
• /
• 2010

In this study, five series of novel polyurethanes was synthesized by the polyaddition reaction of diisocyanates such as 2,6-tolylene diisocyanate(2,6-TDI), 2,5-tolylene diisocyanate(2,5-TDI), 2,4-tolylene diisocyanate(2,4-TDI), and 1,4-phenylene diisocyanate(1,4-PDI), hexamethylene diisocyanate(HDI) with 4,4'-Bis(3-hydroxypropoxy)biphenyl (BP3), 4,4'-bis(3-hydroxypropoxy)biphenyl exhibited a smectic type mesophase. Monotropic mesophase was found for all synthesized liquid crystalline polyurethanes except HDI/BP3. In contrast, 1,4-PDI/BP3 without a methyl substituent in the phenylene unit exhibited no explicit mesomorphic behavior, which was confirmed by DSC and polarizing microscopy experiments. Structures of the compound were identified by FT-IR and $^1H$-NMR spectroscopies. Their phase transition temperatures and thermal stability were also investigated by differential scanning calorimetry(DSC), polarized optical microscopy(POM) and x-ray diffraction analysis.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.39-44
• /
• 2005

In this study, polyurethane-acryl emulsion resins were synthesized from HDI (hexamethylene diisocyanate), IPDI (isophorone diisocyanate), Polyol, 2-HEMA (2-hydroxy ethylmethacrylate), n-BA (n-butyl acrylate) and MMA (methylmethacrylate). The effects of polyol types on the properties of polyurethane-acryl emulsion resin, such as degree of strength and water resistance and on the manufacturing process were investigated. In addition, the results were compared with those of acrylic emulsion. The test results showed that polyester type polyol demonstrated stronger tensile strength and higher water resistance with time than did acrylic emulsion and polyether type polyol.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.30-34
• /
• 2019

Four different diisocyanates (IPDI; isophorone diisocyanate, HDI; hexamethylene diisocyanate, HMDI; dicyclohexylmethane-4,4'-diisocyanate, and XDI; m-xylylene diisocyanate) were used to prepare polyurethane gel-coats, and the weatherabilities, physical properties, and surface characteristics of the gel-coats were investigated with respect to the chemical structure of the diisocyanates. The weathering test results indicated that all of the diisocyanates used in this study were suitable for use in the preparation of the polyurethane gel-coat. However, the set-to-touch times and physical properties of the polyurethane gel-coat indicated that the cycloaliphatic diisocyanate (IPDI and HMDI) were ideal for the preparation of polyurethane gel-coats.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.104-111
• /
• 2013

Poymer blends of two degradable aliphatic polyesters, relatively expensive material polylactic acid (PLA) and relatively inexpensive material poly(butylene adipate-co-terephthalate) (PBAT), were used in this study. Three different kinds of modifiers were used with various amounts. Diisocyanate type methylenediphenyl 4,4'-diisocyanate (MDI) and hexamethylene diisocyanate (HDI) were used as modifiers and epoxy type coupling agents also used. The melt flow index (MFI) and dynamic viscoelasticity of various compositions of PLA/PBAT blends were studied. The mechanical property and morphology with respect to the fracture surface of PLA/PBAT blends were also investigated using tensile test and field emission scanning electronic microscopy, respectively. These tests were also used to verify the compatibility of PLA/PBAT and the effect of mechanical properties due to the use of modifiers. Tensile properties of PLA/PBAT blends modified with HDI were improved remarkably.

• Elastomers and Composites
• /
• v.58 no.3
• /
• pp.121-127
• /
• 2023

The effect of diisocyanate type on the decomposition temperature of polyurethane (PU) hydrolysis was investigated in a subcritical water medium up to 250℃. PU samples were prepared using different types of diisocyanate: two aromatic diisocyanates (4,4'-methylene diphenyl diisocyanate (MDI) and methyl phenylene diisocyanate (TDI)), one unbranched aliphatic diisocyanate (hexamethylene diisocyanate (HDI)), and two cyclic aliphatic diisocyanates (4,4'-methylene dicyclohexyl diisocyanate (H₁₂MDI) and isophorone diisocyanate (IPDI)). The pressure had no effect on hydrolysis in the range of 70-250 bar. The decomposition temperature of the PU samples increased in the following order: TDI-PU (199℃) < H₁₂MDI ≈ IPDI ≈ HDI (218-220℃) < MDI-PU (237℃). This order of increase in temperature is related to the electron-donating ability of the group to connected to the nitrogen of the urethane unit. When the temperature of the (PU + water) mixture reached the specific decomposition temperature, the PU samples hydrolyzed completely within 5 min into primary amine and 1,4-butanediol. The hydrolysis products from MDI-PU and H₁₂MDI-PU were separated into a liquid phase rich in (BD + water) and a solid low phase rich in amine, whereas the products from TDI-, IPDI-, and HDI-PU existed in a single aqueous phase.

• Macromolecular Research
• /
• v.16 no.3
• /
• pp.194-199
• /
• 2008

Four novel polyurethanes were prepared from 4-{(4-hydroxyphenyl)iminomethyl} phenol by reactions with two aromatic diisocyanates, 4,4'-diphenylmethane diisocyanate and toluene 2,4-diisocyanate, and two aliphatic diisocyanates, isophorone diisocyanate and hexamethylene diisocyanate. The polyurethanes formed were characterized by UV-vis, fluorescence, FT-IR, $^1H$-NMR, $^{13}C$-NMR, differential scanning calorimetry, thermogravimetry, and X-ray diffraction. The polymers were semi-crystalline and all polymers were soluble in polar aprotic solvents.