• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.326-329
• /
• 1996

In order to synthesize Ba-ferrite fine particles by molten salt method and inhibit the abnormal grain growth of sintered specimen, KCI anti NaCl were added to basic composition to 50% by weight, and added 1 male% of $SiO_2$ to control the shape of Ba-ferrite particles. $H_{c}$ and $M_{r}$ were decreased when F $e^{3+}$ was substituted with $Co_{2+}$ and $Ti_{4+}$ from x=0 to x=1.0 in $BaFe_{12-2x}$ $Ti_{x}$ $Co_{x}$ $O_{19}$ , and 1 mole% $SiO_2$ increased the size but shortened c-axis of hexagonal ferrite. Seeds added in Ba-ferrite particle effected inhibition of abnormal grain growth during sintering.ing.g.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.49-52
• /
• 1998

Preparation of hexagonal strontium-ferrite by modified spray co-roasting(MSC:H) which is expected to shorkn the length of the process and to elevate the magnetic properties of hard ferrite was studied. We prapared $Fe_2O_3/SrCO_3$ mixture powders by MSCR after stirring ionized $FeCI_2$ in distilled water with solid state $SrCO_3$. And then calcined the mixture powders up to $1150^{\circ}C$ for Sr-ferrite powders It is possible to prepare hexaferrite powders with high saturation magnetization (Ms > 69 emu/g) , coercivity (Hc > 4000 Oe) The nlagnetic values of saturation magnetization iire higher than those achieved by the conventional technique.

• 한국세라믹학회지
• /
• 제16권2호
• /
• pp.89-98
• /
• 1979

In order to prepare ferroxplana ZnY $(Ba_2Zn_2Fe_{12}O_{22})$, which would be useful for GHz-band communication, the optimum coprecipitation condition of 1 $BaCl_{2-1} Zn(NO_3)_2-6FeCl_3$ in $NaOH-Na_2CO_3$ solution was investigated by use of a new apparatus invented in our laboratory. By freeze-drying and calcining the coprecitated hydroxide-carbonate, the very reactive powder was obtained, from which the synthesis process of ZnY and the other related crystals were investigated by means of X-ray diffraction. In results, it was found that the reactive powder containing ZnY as the major component can be prepared by this method, which may be used in manufacturing the various magnetic cores for the microwave communication.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.962-966
• /
• 1993

Effect of Fe content on the electrical properties of Zn2Y (Ba2Zn2Fe12O22) was studied by investigating X-ray diffraction patterns, microstructure and resistivity of samples. When x(Ba2Zn2Fe12＋xO$\delta$) is between ＋1 and -1, Zn2Y single phase was obtained and electrical resistivity was inversely proportional to Fe content. The possible defect model of Zn2Y was proposed based on the observation. When x<-1 or x>1, second phase(ZnFe2O4 for x<-1, ZnFe2O4 and Ba3Zn3Fe24O41 for x>1) were observed and the electrical resistivity was inversely proportional to the sample density. The activation energy of electrical conductivity of the stoichiometric Zn2Y was 0.49eV below 20$0^{\circ}C$ and 0.07eV above 50$0^{\circ}C$.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.735-739
• /
• 1995

An experiment was carried out to investigate the effect of $Na_{2}O$ additive on the magnetic and physical properties of $SrZn_{2}-W$ type hexagonal ferrite. The specimens were prepared by the conventional manufacturing methods without atmosphere control. It was found that the magnetic properties of SrO.2ZnO.$8Fe_{2}O_{3}$ are considerably improved on adding 1.5wt% $Na_{2}O$. Theoptimum condition of making magnet with suitable properties are as follows : chemical analysis composition : $Sr^{2+}_{0.852}Zn^{2+}_{1.721}Na^{+}_{0.301}Fe^{2+}_{0.723}Fe^{3+}_{15.703}O_{27}$ ; semisintering condition : $1300^{\circ}C\;{\times}\;1h$ in air ; sintering condition : $1250^{\circ}C\;{\times}\;0.5h\;T_{c}=371^{\circ}C,\;H_{A}=1091.5kA/m,\;K_{A}=2.13{\times}10^{5}J/m^{3}\;and\;n_{B}=31.8\mu\textrm{B}$.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.114-121
• /
• 1994

$Ba_{2}Co_{2-x}Zn_{x}Fe_{12}O_{22}(x\;=\;0.0~2.0,\;Co_{2-x}Zn_{x}Y)$ 분말을 공침법으로 합성하고 $1150~1250^{\circ}C$에서 4시간 동안 소결을 하였다. 소결체의 미세구조와 자기적 특성(포화자화, Curie 온도)과 복소투자율을 측정하였다. $Co_{2-x}Zn_{x}Y$의 조성식에서 x=0에서 x=2.0까지 x의 증가에 따라 복소투자율의 실수항은 증가하였고, 공명주파수는 7 GHz에서 1 GHz 감소하였다. Y-형 육방정 페라이트는 수 GHz대역에서 공명이 일어나므로 스피넬 페라이트보다 더 높은 주파수에서 사용가능하고, 회전공명보다 높은 주파수에서 관찰된 2차공명 기구에 대한 더 많은 연구가 필요하다.

• 한국전기전자재료학회논문지
• /
• 제13권10호
• /
• pp.887-894
• /
• 2000

In this paper, we have studied the effect of earth (Gd, Er) on the various properties (microstructure, shrinkage, initial permeability, permeability as a function of frequency, etc) of Ba-ferrite. The permeabilities were analyzed by Impedance Analyzer(100KHz~40MHz) and Network Analyzer(30KHz~3㎓). As the result of XRD, all of the Ba-ferrite doped with rat earth was found to be Y-hexagonal phase. The resonance frequencies at the maximum imaginary value of complex permeability were observed near 2㎓. The complex permeabilities of the Ba-ferrite doped with Gd$_2$O$_3$at 3wt% and doped with Er$_2$O$_3$at 3wt% and 5wt% as a function of frequency showed the highest value at sintered temperature at 95$0^{\circ}C$/3h.

• 한국세라믹학회지
• /
• 제24권1호
• /
• pp.17-22
• /
• 1987

This study is to detect the synthetic condition for the formation of Sr-Ferrite(SrFe12O19) by hydrothermally reaction. Mixed suspension of SrCl26H2O and FeCl3 6H2O were fixed on pH and were subjected to autoclavings at various temperature(150∼300$^{\circ}C$), reaction time(2hrs.∼48hrs.). The Sr-Ferrite powders were synthesized at 150$^{\circ}C$ for 36hrs, 200$^{\circ}C$ for 4hrs and 250$^{\circ}C$ for 2hrs. Synthesized powders were increased particle sizes at longer reaction time and higher reaction temperature. It has hexagonal ferrite M-type structure and has high purity of SrO.5.6 Fe2O3 composition.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 동계학술연구발표회 및 2차 아시안포럼
• /
• pp.22-23
• /
• 2005

• 한국자기학회지
• /
• 제10권6호
• /
• pp.285-290
• /
• 2000

본 연구에서는 Hexagonal Barium Ferrite(BaM) 박막을 RF magnetron sputtering system을 이용하여 상온에서 증착한후, 85$0^{\circ}C$에서 열처리하여 결정화하였다. XRD pattern을 통해 BaM 박막의 working pressure 10 mTorr에 대한 산소분압(Po$_2$)을 0~3 mTorr가지 변화하여 알아본 결과, 1 mTorr 이하의 산소분압(Po$_2$)에서는 spinel 상과 BaM 상이 함께 형성되었으나, 1 mTorr 이상의 높은 산소분압(Po$_2$)에서는 BaM 상만이 형성되는 것을 알 수 있었다. BaM 박막의 자기적특성을 VSM을 통하여 알아본 결과 산소분압(Po$_2$)이 증가함에 따라 수직보자력은 일정하게 감소를 하였으나 포화자화값은 1 mTorr가지 증가하다 감소하였다. 열처리 시간에 따른 결정화 정도와 특성을 알아본 결과 열처리를 시작한 뒤 10분 이내에 대부분의 특성변화가 일어났으며, 그 이상의 온도에서는 커다란 변화를 일으키지 않음을 알 수 있었다.