• 한국세라믹학회지
• /
• 제32권12호
• /
• pp.1383-1391
• /
• 1995

Hexagonal $\delta$-FeOOH was coated with Ba-Sol, which was produced by hydrolizing Ba(OC2H5)2, Ba-Sol coated $\delta$-FeOOH spread on a stainless plate, dried at 8$0^{\circ}C$ and then heat-treated. In this way, Ba-ferrite fine particles were produced. although there was a difference in a degree of hydrolysis of Ba(OC2H5)2, crystalline phase of Ba-ferrite appeared around 617$^{\circ}C$, and Ba-ferrite single phase was obtained after heat treatment at 80$0^{\circ}C$ for 2 hr. When Ba-ferrite was made from Ba-Sol coated $\delta$-FeOOH, $\delta$-FeOOH was thermally decomposed to $\alpha$-Fe2O3 at $700^{\circ}C$, producing a porous structure which was observed by TEM photographs. But the porous structure was not observed at 80$0^{\circ}C$. Ba-ferrite, heat-treated at 80$0^{\circ}C$ for 2 hr, had mean particle size of 1000$\AA$, lattice parameter of a0=5.889243 $\AA$ and c0=23.214502 $\AA$, a saturation magnetization ($\sigma$8) of 45.3 emu/g and a coercive force (Hc) of 5200Oe.

• 전자공학회논문지A
• /
• 제33A권5호
• /
• pp.75-84
• /
• 1996

planar circulator swith arbitrarily shaped ferrite resonators are analyzed in this paper. First, resonant frequencies and field distributions for the magnetized ferrite resonator are obtained using finite element method (FEM). Then the RF voltage distributions and other circuit parameters of the circulator which is formed by connecting three suitable transmission lines ot the ferrite resonator are derived from the green function . To remove the spurious solutions in analyzing the ferrite resonator, the results of eigenvalue analysis by node based FEM are comapred with the edge based fEM. The green function is expanded in terms of normalized eigenfunctions of th ecorresponding wave equation. Circulator parameters for circular disk resonator are clculated and compared with the analytical results. The experimental data for the designed circulator using hexagonal reosnator in the 850 MHz frequency range agree well iwth the simulated data.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 자성 및 자성재료 국제학술대회
• /
• pp.52-52
• /
• 2013

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.82.2-82.2
• /
• 2008

• Journal of Magnetics
• /
• 제14권2호
• /
• pp.93-96
• /
• 2009

The Mn-substituted M-type Ba-ferrite ($BaFe_{12-x}Mn_xO_{19}$; x = 0, 2, 4, 6) powders were prepared by the HTTD (High Temperature Thermal Decomposition) method. The effect of $Mn^{3+}$ Jahn-Teller ions on the magnetic properties has been studied by x-ray diffraction, vibrating sample magnetometry, and $M{\ddot{o}}ssbauer$ spectroscopy. With increasing Mn substitution, the lattice parameter $a_0$ increases while $c_0$ decreases. The magnetocrystalline anisotropy constants ($K_1$) were determined as 2.9, 2.2, 1.8, and, $1.3{\times}10^6\;erg/cm^3$ for x = 0, 2, 4, and 6, respectively, by the LAS method. We have studied the change of cation distribution by $M{\ddot{o}}ssbauer$ spectroscopy which is closely related to $K_1$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1314-1316
• /
• 1994

$0.36[wtx]Sio_2$ and $0.1[wtx]H_3BO_3$ were added to strontium ferrite magnets of the magnetoplumbite phase SrO $5.7Fe_2O_3$. This experiment was carried out to investigate the effects of particle size distribution as a function of milling time(20,30,40,50,60,70 hours) on the magnetic properties of SrO $5.7Fe_2O_3$ ferrite magnet. The B-H Curve, density and the degree of orientation were measured. The optimal conditions of making magnets and properties of a typical sample are the following : The milling time was 60 hours. Magnetic and physical properties are $B_r$=4000[G], $_BH_c$=3330[Oe], $_IH_c$=3525[Oe], (BH)max=3.786 [MGOe], density= $5.0063g/cm^2$, orientation factor f=0.813.

• 한국자기학회지
• /
• 제13권4호
• /
• pp.165-170
• /
• 2003

BaFe$_{12}$ O$_{19}$ 분말을 sol-gel법을 이용하여 제조하였다. X-선 회절분석결과 hexagonal 결정구조를 갖으며 격자상수 a와 c는 a=5.822, c=23.215 $\AA$으로 분석되었다 뫼스바우어 분광기 실험을 통해 Curie온도는 780$\pm$3K 임을 확인할 수 있었으며, 4f$_2$, 2a. 4f$_1$, 12k, 2b의 5-site에 해당하는 각각의 이성질체이동값이 상온에서 0.26, 0.24, 0.15, 0.25, 0.24 mm/s로서 Fe$^{3+}$ 의 상태로 존재함을 알 수 있었다. 접근의 법칙(Law of approach to saturation)에 의해 결정자기 이방성 에너지 H$_{A}$ 와 결정자기 이방성 상수 $K_1$를 계산하였으며 95$0^{\circ}C$에서 열처리한 바륨페라이트의 경우 $K_1$ = 2.5 ${\times}$ $10^{6}erg/cm^3$ 그리고 H$_{A}$ = 14 kOe 값을 가졌다.

• 한국세라믹학회지
• /
• 제49권3호
• /
• pp.205-215
• /
• 2012

It has been studied the crystal and block structures of the hexagonal ferrites with M, W, Y and Z types prepared by various coprecipitation-oxidation method. The structures have been refined with a Rietveld analysis of the powder X-ray diffraction pattern with high precision ($R_{WP}$ <0.09, $R_I$ <0.03). The density difference between the S-blocks was proportioned to the cobalt contents in hexagonal ferrites, but that between the R or T-blocks was relatively small. Compared with the blocks and cation-oxygen polyhedra in BaM ($BaFe_{12}O_{19}$), those were bulky to the normal direction for the c-axis in $Co_2W$ ($BaCo_2Fe_{16}O_{27}$) and to the parallel direction for the c-axis in $Co_2Y$ ($Ba_2Co_2Fe_{12}O_{22}$) and $Co_2Z$ ($Ba_3Co_2Fe_{24}O_{41}$). The S-blocks of $Co_2W$, $Co_2Y$, and $Co_2Z$ were unstable and distorted. Because the T-block of $Co_2Z$ was unstable, the T-block was decomposed into the Ba-rich phase and $Co_2W$ at high temperatures above $1200^{\circ}C$. A standard powder X-ray diffraction pattern for $Co_2Z$ was proposed as well.

• 한국세라믹학회지
• /
• 제38권5호
• /
• pp.401-404
• /
• 2001

Barium ferrite powders were synthesized by the coprecipitation method using iron-pickling waste acid (IPWA) and BaCl$_2$$.$2H$_2$O as raw materials. Fe$\^$2+/ ions in the IPWA, which contains both Fe$\^$2+/ and Fe$\^$3+/ ions, were oxidized into Fe$\^$3+/ ions using H$_2$O$_2$. Proper amount of BaCl$_2$$.$2H$_2$O was dissolved into the oxidized IPWA. Using NaOH, Ba$\^$2+/ and Fe$\^$3+/ ions were coprecipitated as Ba(OH)$_2$and Fe(OH)$_3$. The coprecipitated Ba(OH)$_2$and Fe(OH)$_3$were washed and dried. Barium ferrite powders were obtained by calcining the dried Ba(OH)$_2$and Fe(OH)$_3$mixture from 400$\^{C}$ to 1000$\^{C}$ with a 100$\^{C}$ interval. Barium ferrite powders were characterized by X-ray diffraction, SEM, and VSM. It was found that barium ferrite powders could be synthesized at around 630$\^{C}$. The synthesized barium ferrite powders showed hexagonal plate shapes with a fairly uniform size. The barium ferrite powder calcined at 900$\^{C}$ showed good magnetic properties, saturation magnetization of 67emu/g and maximum coercivity of 5000 Oe.

• 한국세라믹학회지
• /
• 제30권6호
• /
• pp.499-509
• /
• 1993

Structures of hematite(${\alpha}$-Fe2O3), Ba-ferrite(BaFe12O19) and Zn2Y(Ba2Zn2Fe12O22) were studied by powder X-ray diffraction(XRD) method. Powder XRD patterns of the ferrites were analyzed with the Rietveld method, and the final refined R-factors were RWP<0.01 and RI<0.03. The lattice parameters refined with hexagonal crystal system were a=5.0342${\AA}$, c=13.746${\AA}$ for hematite, a=5.8928${\AA}$, c=23.201${\AA}$ for Ba-ferrite, and a=5.8763${\AA}$, c=43.567${\AA}$ for Zn2Y. In the hematite, the oxygen parameter is 0.3072 and the Fe-O distances in FeO6octahedron are 1.941${\AA}$ and 2.118${\AA}$, close to the single crystal data of Blake et al.. In the Ba-ferrite, the Fe atom in oxygen trigonal bipyramid is displaced 0.155${\AA}$ away from the BaO3 mirror plane into 4e position. In the Zn2Y, 75% of Zn is located at the oxygen terahedral site in S-block.