• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.477-482
• /
• 1992

A bacterial strain Acinetobacter calcoaceticus was examined for its ability to degrade fats, oils and hydrocarbons, and tested for the possibility of application in wastewater treatment. All fats and oils tested were degraded by the strain. About 60% of hexadecane, 26% of fish oiL and 40-54% of vegetable oils were consumed respectively in shaking-flask culture. Saturated fatty acid compositions were about 55% in fish oil and 6-12% in vegetable oils. Increases in cell mass were accompanied with decreases in the concentrations of carbon sources. When jar fermentor in place of shaking-flask was used as a culturing vessel. above 80% of all carbon sources was consumed and yield of cell mass was improved to nearly 1.00. Synthetic wastewaters containing 3% of fat, oil, or hydrocarbon as a sale ca,bon source were treated sequentially with A. calcoaceticus first and then exposed to activated sludge. The concentrations of carbon sources were decreased below 0.06% through the process, and the concentrations of suspended solids were lower than 53 mglml. The data imply the potential use of A. calcoaceticus in wastewater treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.2
• /
• pp.252-258
• /
• 1998

The strain producing biosurfactant was isolated from soil smples. The isolated strain was identified as the genus Nocardia through its morphological, cultural and physiolgical characteristics. A high concentration of the biosurfactant by Nocardia sp. L-417 was obtained after 4 days of cultivation in the culture medium containing 3% n-hexadecane, 0.1% $NaNO_3$, 0.02% $K_2HOP_4$, 0.01% $H_2PO_4$, 0.01% $MgSO_4$.$7H_2O$, 0.01% $CaCl_2$, 0.02% yeast extract, and 0.02% tryptone. The optimum pH and temperature for biosurfactant production were pH 6.0 and $30^{\circ}C$, respectively. Furthermore, most biosurfactans were produced during the exponential growth phase, and this fact indicated that the biosurfactans production was growth-associated. The biosurfactant showed the good emulsification activities on various emulsifying substrates such as bunker A, paraffin, corn oil which are used widely in industries.

• KSBB Journal
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2000

A marine bacterium having a high oil-degrading activity was isolated form the oil-polluted southern sea of Korea, and was identified as Pseudomonas aeruginosa and was named Pseudomonas aeruginosa BYK-2. The optimal tmeperatur, culture time, pH and NaCl concentration for biosurfactant production and cell growth showed $25^{\circ}C$, 48h, 7.0 and 0%(w/v), respectively. After cultivation at $25^{\circ}C$, 180 rpm in 250 mL erlenmeyer flask for 7days, 1%(w/v) arabian light crude oil and bunker C oil which are considered to be hardly degradable compounds were degraded 92.1%(w/w) and 76%(w/w) respectively. And then, cell adherence was measured on various carbon sources. The cell adherence indicated over 80% on hydrocarbons(arabian light crude oil, kuwait curde oil, bunker C oil, n-paraffine, n-hexadecane, n-tetradecane) as carbon sources. Lecithin among fatty acids(oleic acid, olive oil, lecithin) showed highest cell adherence of 91.5%. The cell adherence of sugars(arabinose, trehalose, dextrose, galactose, lactose, fructose, maltose, sorbitol, sucrose) observed to be less than 70% except for arabinose, galactose, sorbitol and sucrose.

• Journal of the Korean Society of Tobacco Science
• /
• v.12 no.2
• /
• pp.67-75
• /
• 1990

The pyrolytlc behavior of cocoa powder, a flavorant of tobacco smoking products, was examined by determining its pyrolyzate constituents. Cocoa powder was pyrolyzed of two cigarette smoking conditions'distillation-pyrolysis zone(35$0^{\circ}C$, 55$0^{\circ}C$) and high temperature zone($650^{\circ}C$, 85$0^{\circ}C$). Pyrolyzate was flushed from the tube by NB gas into CS2 trap in dry ice-acetone cooled bath and charcoal tube and its constituents were analyzed by GC/MS. As results, the major components of pyrolyzates were identified as hydrocarbon and phenolic compounds. In addition to these, aldehyde, ketone, pyrazin in very small amount. Component changes were observed with temperature increase; decane, styrene, tridecane, m-cresol,4-ethylphenol were increased while hexadecane, tetradecane were decreased. o-cresol and 2-ethylphenol were constant in amounts despite temperature change.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.3
• /
• pp.184-188
• /
• 1996

The Acinetobacter sp. BE-254 isolated from soil sources produced a bioemulsifier in the medium supplemented with n-hexadecane. This bioemulsifier was purified by the procedures of fractionation (ammonium sulfate and chilled acetone), extraction by hexane, and column chromatography on silica gel 60. The results from various color reactions indicated that the bioemulsifier was a glycolipid. The purified emulsifier was very stable at pHs ranging from 4 to 10 and under heat treatment at $100^{\circ}C$ for 30 min. Emulsification activity was also hardly influenced by pH. The critical micelle concentration (CMC) and surface tension at the point ($\gamma_{cmc}$) of the bioemulsifier were approximately 35 mg/l and 30 mN/m, respectively. The bioemulsifier showed a fairly good emulsification activity and stability in comparison with other commercial emulsifiers in the basic formula composed of emulsifier, oil, and water.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.83-84
• /
• 2002

For estimation of chain-matching phenomena between normal paraffin as a solvent and straight-chain fatty acid as an additive, the density measurement of n-dodecane, n-tetradecane and n-hexadecane were carried out at oil temperature 313K and pressure up to 1.3 GPa. Their solidification pressure were easily determined by the appearance of molecular crystal, abrupt volumetric contraction and generation of heat of solidification and showed minima under the matching condition. The bulk modulus K of molecular crystal was evaluated using phase diagram. The bulk modulus showed maxima under the each matching condition. The chain matching effect on the bulk modulus beyond the scope of the interfacial phenomena are confirmed.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.317-320
• /
• 2000

Effects of supplementing various 0.1-1.0%(w/v) surfactants and 0.1-1.0%(v/v) oxygen vectors on postthaw growth following cryopreservation of transgenic Nicotiana tabacum(GUS) in suspension culture were investigated. The postthaw cell growth was increased 20.68% and 23.66% compared to control when Pluronic F-68 and polyethylene glycol(PEG) were added in recovery medium respectively. Addition of n-hexadecane and FC-40 also enhanced the recovered growth by 14.89% and 20.68%. These results demonstrate that the marked Protection could be achieved by using surfactants and oxygen vectors for plant cells recovered from cryostorage.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.162-166
• /
• 2004

This study investigated tile effect of ozonation on indigenous microorganisms distributed in different size fractions of soil aggregates. Soil was ozonated from 0 to 300 minutes. The treated soils were fractionated into 3 groups (small, <53 $\mu$m; medium, 53-500 $\mu$m; and large, 2000-500 $\mu$m) and total heterotrophic bacteria in the soils were enumerated. Cell number decreased rapidly within 120 minute ozonation and showed slow decrease upon longer ozonation. Abundance of total heterotrophic bacteria in each fraction was in the following order regardless of ozonation time: small>medium>large fractions. Difference in microbial abundance among the fractions was smaller as ozonation time increased.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.1
• /
• pp.32-38
• /
• 1999

A biosurfactant produced by Tsukamurella sp. 26A was purified by procedures including acid precipitation, ethylacetate extraction, and adsorption chromatography. The purified biosurfactant reduced the surface tension of water from 72 mN/m to 30 mN/m at a concentration of 250 mg/l, whereas the minimum interfacial tension against n-hexadecane was lowered to 1.5 mN/m at a concentration of 40 mg/i. The compound stabilized oil-in-water emulsions with a variety of commercial oils and had strong emulsification and stabilization activities when compared to those of commercial emulsifiers and stabilizers. Surface tension was stable over a broad range of pH (2-12) and temperature ($100^{\circ}C$, 3h). The biosurfactant was identified as glycolipid having a hydrophilic moiety of trehalose.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.110-119
• /
• 2005

The combustion characteristics of binary component single droplets hanging at the tip of a quartz fiber are studied experimentally at different environmental pressures and temperatures under normal gravity. Normal Heptane and Normal Hexadecane are selected as two fuels with high difference in boiling temperatures. A falling electrical furnace in a high pressure vessel has provided high temperature environment. Nitrogen and air have formed the environment to study evaporation and combustion, respectively. The initial diameter of droplet was ranging from 1.1 to 1.3 mm. The evaporation and combustion processes were recorded by a high speed digital camera. Some characteristics of droplet burning under different environment conditions and different droplet composition have been investigated. Microexplosion of droplet take places under atmospheric pressure. Bubble formation and its consequent result, incomplete droplet disintegration which presents in all binary compositions, do not appear at high pressure. The initiation of combustion, always takes place in the bottom of droplet due to buoyancy effect of relatively cold fuel vapor. Also, the burning of binary droplet produces soot when the pressure is high.