• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.77-88
• /
• 2010

Wireless Mesh Networks are consist of mobility mesh clients and mesh routers. WMNs can communicate with heterogeneous networks such as IEEE 802.11, IEEE 802.15, IEEE 802.16 and sensor networks. WMNs which is based on ad hoc network are on research and developing to enhance WLANs, WPANs, or WMANs. WMNs can offer environment to serve human, service to person area, campus, and metro. But WMNs has many problems to solve about enhancing performance and generalization. Among them, Existing protocol layers has many problems enhancing to optimize WMNs. This document issues problems about WMNs in protocol layer and suggest the solutions. Also, suggests the requirements and the methods of QoS supporting issue.

• Composites Research
• /
• v.23 no.2
• /
• pp.24-30
• /
• 2010

Interfacial evaluation and hydrophobicity of Ni-nanopowder/epoxy composites were investigated for self-sensing and actuation. Contact resistance and resistivity were measured using gradient micro-specimens. The actuation of the composites in the electromagnetic field was studied with three wave functions, i.e., sine, triangle and square functions. Due tothe presence of hydrophobic domains on the heterogeneous surface, the static contact angle of Ni-nanopowder/epoxy nanocomposite wasabout $100^{\circ}$, which was rather lower than that for super-hydrophobicity. The dynamic contact angle showed the similar trend of static contact angle. Ni-nanopowder/epoxy composite was responded wellfor both self-sensing and actuation in electromagnetic field due to the intrinsic metal property of Ni-nanopowder. Displacement of the actuator of Ni-nanopowder/epoxy composite was evaluated to obtain the maximum and the optimum performance using laser displacement sensor as functions of the wave type, frequency, and voltage. Actuation of Ni-nanopowder/epoxy composites also increased as functions of applied frequency and voltage. Actuated strain increased more rapidly at sine wave with increasing voltage compared to those of triangle or rectangular waves.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_2
• /
• pp.939-948
• /
• 2020

CAS500-1 and CAS500-2 are high-resolution Earth-observing satellites being developed and scheduled to launch for land monitoring of Korea. The satellite information will be used for land usage analysis, change detection, 3D topological monitoring, and so on. Satellite image data of region of interests must be acquired in the stereo mode from different positions for 3D information generation. Accurate 3D processing and 3D display of stereo satellite data requires the epipolar image resampling process considering the pushbroom sensor and the satellite trajectory. This study developed an epipolar image resampling module for CAS-500 stereo data processing and verified its accuracy performance by testing along-track, across-track, and heterogeneous stereo data.

• Smart Structures and Systems
• /
• v.14 no.1
• /
• pp.39-54
• /
• 2014

Node layout optimization of structural wireless systems is investigated as a means to prolong the network lifetime without, if possible, compromising information quality of the measurement data. The trade-off between these antagonistic objectives is studied within a multi-objective layout optimization framework. A Genetic Algorithm is adopted to obtain a set of Pareto-optimal solutions from which the end user can select the final layout. The information quality of the measurement data collected from a heterogeneous WSN is quantified from the placement quality indicators of strain and acceleration sensors. The network lifetime or equivalently the network energy consumption is estimated through WSN simulation that provides realistic results by capturing the dynamics of the wireless communication protocols. A layout optimization study of a monitoring system on the Great Belt Bridge is conducted to evaluate the proposed approach. The placement quality of strain gauges and accelerometers is obtained as a ratio of the Modal Clarity Index and Mode Shape Expansion values that are computed from a Finite Element model of the monitored bridge. To estimate the energy consumption of the WSN platform in a realistic scenario, we use a discrete-event simulator with stochastic communication models. Finally, we compare the optimization results with those obtained in a previous work where the network energy consumption is obtained via deterministic communication models.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11B
• /
• pp.1005-1012
• /
• 2008

According to an aging population has dramatically increased in over the world, silver care becomes more important than other field. In this paper, we design and implement an old age patient care system that allows a carer to instantly monitor the status of proteges and notifies emergency of a patient to a medical institute. The system uses RFIDs and infrared sensors implemented in embedded software to analyze the activity and movement detection of the elderly. And the home gateway allows easy integration with heterogeneous devices by employing OSGi that is a middleware standard for home gateways. We can verify the information on the activity per day and the activity per week by Web browsers and view realtime video on the elderly by Web Cam using the implemented system. The system also can send us cell phone messages and E-mail in case of emergency.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.2
• /
• pp.1070-1088
• /
• 2017

Recently, the applications of Internet of Things (IoTs) are growing rapidly. Wireless Sensor Network (WSN) becomes an emerging technology to provide the low power wireless connectivity for IoTs. The IPv6 over low-power wireless personal area networks (6LoWPAN) has been proposed by IETF, which gives each WSN device an IPv6 address to connect with the Internet. The transmission congestion in IoTs could be a problem when a large numbers of sensors are deployed in the field. Therefore, it is important to consider whether the WSN devices have be completely integrated into the Internet with proper quality of service (QoS) requirements. The Software Defined Network (SDN) is a new architecture of network decoupling the data and control planes, and using the logical centralized control to manage the forwarding issues in large-scale networks. In this research, the SDN-based 6LoWPAN Border Router (6LBR) is proposed to integrate the transmission from WSNs to Internet. The proposed SDN-based 6LBR communicating between WSNs and the Internet will bring forward the requirements of end-to-end QoS with bandwidth guarantee. Based on our experimental results, we have observed that the selected 6LoWPAN traffic flows achieve lower packet loss rate in the Internet. Therefore, the 6LoWPAN traffic flows classified by SDN-based 6LBR can be reserved for the required bandwidth in the Internet to meet the QoS requirements.

• Journal of Fashion Business
• /
• v.24 no.1
• /
• pp.15-28
• /
• 2020

The purpose of this study was to develop and propose creative smart bags in emotional e-textiles using LEDs that inform smartphone users of motion-induced luminescence and ringing of cell phones. The LED light-emitting operation tasks produced in the study were applied to each of the three design smart bags, setting the five cases of luminance by a call initiated, absent phone, rejecting answering phone, texting, and motion-induced luminescence. In the male laptop bags of LED luminous images using wappen, 10 LEDs could be separated by a total of three pins to display the luminous mode, and all 10 LEDs became a total of five luminous patterns, including all that illuminate and those that illuminate randomly. E-wappen rendered the motif a strong sense of visibility and performed six roles on phone rings and texting. To develop a women's tote bag, we did a laser cut and attached the leather strips and placed 10 triangular LEDs to form a geometric LED e-textile. It provides the possibility of transforming simple design from traditional fashion into a more interesting and various smart designs. An entertainment smart bag using graphic design was constructed by applying a tilt sensor to look like a light in the night sky by shaking and moving the bag. The graphic design and composition of LEDs indicate that LEDs and fashion item are applied in harmony rather than heterogeneous, enabling them to be applied as fashion-oriented wearable smart products.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.46-58
• /
• 2008

Naval combat management system is a kind of complex weapon systems performing naval ship's warfare mission by integrating various types of system including sensor systems, weapon systems and many kinds of communication system. Recently, there are many studies to apply commercial high-level communication middleware to naval combat system development to integrate and interoperate various kinds of heterogeneous on-board systems efficiently. An initial discovery mechanism is required for application modules to start communication with their relevant modules to apply middlware technology in developing naval combat system, which is characterized by large-scale, complex and real-time system. This paper suggests a fast hybrid discovery mechanism which combines static and dynamic discovery mechanism and confirms its adaptability by an experiment on testing environment.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.275-285
• /
• 2009

RFID technology using the smart tag technology as a part of the sensor network is currently in the spotlight. But there are still many problems in applying the technology in a ubiquitous environment, induding at the point when anybody can read the tag information and the authentication between the tag and the reader, and security problems in very low-cost smart tag implementation. The proposed scheme is designed to enhance security and efficiency related to various services required in RF networks, based on the reliable peripheral devices for users of passive RFID tag. Using passive RFID tag, which has been applied to authentication transactions in existing papers, this study also proposed an appropriate management scheme that is suitable for a dynamic environment and setting a temporary group to provide various services. also proposed scheme is support RFID grouping, temporary group of service and security servicce, improved efficiency of communication.

• Smart Media Journal
• /
• v.12 no.7
• /
• pp.27-42
• /
• 2023

The development of cloud services and IoT technology has radically changed the cloud environment, and has evolved into a new concept called fog computing and F2C (fog-to-cloud). However, as heterogeneous cloud/fog layers are integrated, problems of access control and security management for end users and edge devices may occur. In this paper, an F2C-based IoT smart health monitoring system architecture was designed to operate a medical information service that can quickly respond to medical emergencies. In addition, a role-based service access control technology was proposed to enhance the security of user's personal health information and sensor information during service interoperability. Through simulation, it was shown that role-based access control is achieved by sharing role registration and user role token issuance information through blockchain. End users can receive services from the device with the fastest response time, and by performing service access control according to roles, direct access to data can be minimized and security for personal information can be enhanced.