• Transactions of Materials Processing
• /
• v.12 no.2
• /
• pp.134-140
• /
• 2003

Polymers such as polypropylene or polyethylene offer a unique feature of producing an integral hinge, which can flex over a million times without causing a failure. With such advantage manufacturing, time and cost required at the assembly stage can be eliminated by injecting the whole part as one piece. However, due to increased fluidity resistance at hinges during molding, several defects such as short shot or premature hinge failure can occur with the improper selection of gate locations. Therefore, it is necessary to optimize flow balancer in injection molding of part with hinges before actually producing molds. In this paper, resin flow patterns depending on several gate positions were investigated by numerical analyses of a simple strip part with a hinge. As a result, we found that the properly determined gate location leads to better resin flow and shorter hesitation time. Finally, injection molding tryouts using a mold that was designed one of the proposed gate systems were conducted using polypropylene that contained 20% talc. The experiment showed that hinges without defects could be produced by using the designed gate location.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.283.1-283.1
• /
• 2002

The adverse health effects on humans and domestic and wildlife species by exposing to environmental contaminants. which interact with the endocrine system. have he en treated as an important issue without hesitation throughout the 1990s. The chemicals with practical and/or potential interfering actions with the endocrine system functions are called endocrine disrupting chemicals (EDCs). (omitted)

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.174-178
• /
• 2003

Analytical chemists frequently use filter papers during the course of experiments without any hesitation. However, the results of analysis could be deteriorated by the various ions which are extracted from filter papers. In some filter paper made for qualitative use, about $300{\mu}g$ sodium and many other cations were detected. Although the quantities of contaminants was low in the filter paper made for quantitative use, significant amount of Fe, Si, Al, Cu and Zn was detected as well as alkali element. Many cations and anions were also detected in the filtrate obtained from the glass fiber filter.

• Journal of Information Technology Applications and Management
• /
• v.13 no.4
• /
• pp.303-319
• /
• 2006

Business Information Systems are strategic applications to achieve companies' goals and innovation. This idea make companies invest their time and budget in the Information Systems. However, it is difficult to forecast effects of the investment in Information Systems and it causes hesitation of making decision. Thus, I researched a case so that I could forecast the effect of the information systems using AHP(analytic hierarchical process). In this study, I approached this matter with three views such as intelligence(review of prior literature), design(methodology development), and application. This study is significant in terms of practicality rather than theoretical dimension. Particularly, I suggested a way of quantifying in monetary value the quality aspects through inverting qualitative facts to quantitative facts and calculated the investment feasibility with it.

• Design & Manufacturing
• /
• v.2 no.4
• /
• pp.37-43
• /
• 2008

Supplementary features in injection molded products, which are boss, rib and snap fit, are mainly located in the products. These features might make molding flow improper in injection processing and consequently give rise to some of molding troubles such as short shot and hesitation. The sink mark on boss parts is generated by the volumetric shrinkage that is caused by both the molding thickness and the closed boss height. The volumetric shrinkage is affected by packing pressure and its amount tends to decrease by increasing the packing pressure. The packing pressure can therefore increase flow rate to a boss part and causes the sink mark depth to increase. As the molding thickness and the closed boss height in the boss part can increase the part volume, these may yield bad solidifying and also extend the molding cycle. In this paper, both the injection molding test and the flow analysis were carried out to investigate the effect of sink marks generated in the boss part of injection molded products.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.1
• /
• pp.11-18
• /
• 2022

Background: The vasoconstrictive effect of epinephrine in local anesthetics affects the heart, which leads to hesitation among dentists in injecting local anesthetics into patients with cardiovascular disease. Due to its vasoconstrictive effects, the present study investigated the effects of vasopressin administration on cardiac function in rats. Methods: Experiment 1 aimed to determine the vasopressin concentration that could affect cardiac function. An arterial catheter was inserted into the male Wistar rats. Next, 0.03, 0.3, and 3.0 U/mL arginine vasopressin (AVP) (0.03V, 0.3V, and 3.0V) was injected into the tongue, and the blood pressure was measured. The control group received normal saline only. In Experiment 2, following anesthesia infiltration, a pressure-volume catheter was placed in the left ventricle. Baseline values of end-systolic elastance, end-diastolic volume, end-systolic pressure, stroke work, stroke volume, and end-systolic elastance were recorded. Next, normal saline and 3.0V AVP were injected into the tongue to measure their effect on hemodynamic and cardiac function. Results: After 3.0V administration, systolic blood pressures at 10 and 15 min were higher than those of the control group; they increased at 10 min compared with those at baseline. The diastolic blood pressures at 5-15 min were higher than those of the control group; they increased at 5 and 10 min compared with those at baseline. The preload decreased at 5 and 10 min compared to that at baseline. However, the afterload increased from 5 to 15 min compared with that of the control group; it increased at 10 min compared with that at baseline. Stroke volume decreased at 10 and 15 min compared with that of the control group; it decreased from 5 to 15 min compared with that at baseline. Stroke work decreased from 5 to 15 min compared with that of the control group; it decreased from 5 to 15 min compared with that at baseline. Conclusion: Our results showed that 3.0 U/mL concentration of vasopressin resulted in increased blood pressure, decreased stroke volume and stoke work, decreased preload and increased afterload, without any effect on myocardial contractility.

• International Commerce and Information Review
• /
• v.14 no.3
• /
• pp.429-451
• /
• 2012

The purpose of this paper is to find what factors have an influential effect on motive and intention of using the unethical negotiation tactics. It is interesting to find that opportunism was not related to unethical negotiation tactics such as inappropriate information gathering and competitive bargaining in our Korea's sample. On the other hand, idealism and Machiavellianism had positive impact on managers' perceptions of unethical negotiation tactics within our sample. To explain the environmental perspective, the lower level of legal punishment system encourages them to use the unethical tactics without hesitation. On the other hand, organizational goal might have not a related on the perception of unethical negotiation tactics. To reduce the potential risk of use of unethical negotiation in the international negotiation process, international negotiators should find the counterpart negotiator' character before attending negotiation table, and international managers would be better to employ a local agent who can understand local negotiating counterpart, so they can assist them in early stage of negotiation.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1123-1128
• /
• 2009

Noise radiated from medical treatment at dental clinic will affect the patients. On such point of view, We investigated the noise characteristics in case of medical treatment (scaling, tooth eliminating) and non-medical examination (idling) and also evaluated the degree of indoor noise using the evaluation index such as PSIL, NRN and made up a questionnaire about the reactions to noise. As a result of noise evaluation, it shows that the range of noise level is 67.7~78.3 dB(A) and frequency is very high (above 4 k Hz) and respondents are affected by noise (unpleasantness, hesitation to visit dental clinic, shivering with noise, being astonishment). Analysis by PSIL showed that it was no problem to conversation between worker and patient. But it exceeded the noise permit level in working space by NR-curve. To relieve a fear of noise in patients, they are considered to offer the ear protection, choose the low noisevibration equipment and use the masking effect. They are of great advantage to dental clinics to i prove dental service and competitiveness.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.3
• /
• pp.13-26
• /
• 2019

There is a growing interest in the entrepreneurial activity that has long been considered essential for sustainable economic development and value creating. Although it is strongly encouraged by focusing on the positive aspects of venturing, less has been paid attention to entrepreneurial failure, which is the biggest cause of hesitation in starting a business. The uncertain and risky nature of entrepreneurship implies a considerable possibility of failure. Even if it fails, the experience and knowledge of entrepreneurs acquired through entrepreneurship indeed offers valuable lessons for the re-venturing, which can serve as an important social asset that should not be lost. It has been argued that re-entering the same industry for the subsequent venture maximizes the learning effect through utilizing potential benefits from industry-specific knowledge. Although the re-startup after entrepreneurial failure is a very important topic in the studies on serial entrepreneurs, there is a paucity of systematic empirical investigation. This study responds to calls for more research on the re-startup after entrepreneurial failure, and specifically complements existing studies on serial entrepreneurs. Focusing on the entrepreneurs' attribution for the failure, we conducted an empirical analysis of how this affects the re-startup process. Moreover, we also examined the moderating effects of entrepreneurial self-efficacy and resilience. For the analyses, we surveyed the entrepreneurs who tried to re-start the subsequent business after the entrepreneurial failure through the "Revitalization Center for Strained Entrepreneur". The results found that failed entrepreneurs who blamed internal factors for their previous venture failures were likely to keep the same industry for their subsequent business. In addition, the positive effect of internal attribution on maintaining the same industry for the re-startup was found to be stronger when entrepreneurial self-efficacy and resilience were high.

• Asia pacific journal of information systems
• /
• v.17 no.4
• /
• pp.61-95
• /
• 2007

Small-and-medium sized enterprises(SMEs) represent quite a large proportion of the industry as a whole in terms of the number of enterprises or employees. However researches on information system so far have focused on large companies, probably because SMEs were not so active in introducing information systems as larger enterprises. SMEs are now increasingly bringing in information systems such as ERP(Enterprise Resource Planning Systems) and some of the companies already entered the stage of ongoing use. Accordingly, researches should deal with the use of information systems by SME s operating under different conditions from large companies. This study examined factors and mechanism inducing faithful appropriation of information systems, in particular integrative systems such as ERP, in view of individuals` active feedback-seeking behavior. There are three factors expected to affect end users` feedback-seeking behavior for faithful appropriation of information systems. They are management support, peer IT champ support, and IT staff support. The main focus of the study is on how these factors affect feedback-seeking behavior and whether the feedback-seeking behavior plays the role of mediator for realizing faithful appropriation of information systems by end users. To examine the research model and the hypotheses, this study employed an empirical method based on a field survey. The survey used measurements mostly employed and verified by previous researches, while some of the measurements had gone through minor modifications for the purpose of the study. The survey respondents are individual employees of SMEs that have been using ERP for one year or longer. To prevent common method bias, Task-Technology Fit items used as the control variable were made to be answered by different respondents. In total, 127 pairs of valid questionnaires were collected and used for the analysis. The PLS(Partial Least Squares) approach to structural equation modeling(PLS-Graph v.3.0) was used as our data analysis strategy because of its ability to model both formative and reflective latent constructs under small-and medium-size samples. The analysis shows Reliability, Construct Validity and Discriminant Validity are appropriate. The path analysis results are as follows; first, the more there is peer IT champ support, the more the end user is likely to show feedback-seeking behavior(path-coefficient=0.230, t=2.28, p<0.05). In other words, if colleagues proficient in information system use recognize the importance of their help, pass on what they have found to be an effective way of using the system or correct others' misuse, ordinary end users will be able to seek feedback on the faithfulness of their appropriation of information system without hesitation, because they know the convenience of getting help. Second, management support encourages ordinary end users to seek more feedback(path-coefficient=0.271, t=3.06, p<0.01) by affecting the end users' perceived value of feedback(path-coefficient=0.401, t=6.01, p<0.01). Management support is far more influential than other factors that when the management of an SME well understands the benefit of ERP, promotes its faithful appropriation and pays attention to employees' satisfaction with the system, employees will make deliberate efforts for faithful appropriation of the system. However, the third factor, IT staff support was found not to be conducive to feedback-seeking behavior from end users(path-coefficient=0.174, t=1.83). This is partly attributable to the fundamental reason that there is little support for end users from IT staff in SMEs. Even when IT staff provides support, end users may find it less important than that from coworkers more familiar with the end users' job. Meanwhile, the more end users seek feedback and attempt to find ways of faithful appropriation of information systems, the more likely the users will be able to deploy the system according to the purpose the system was originally meant for(path-coefficient=0.35, t=2.88, p<0.01). Finally, the mediation effect analysis confirmed the mediation effect of feedback-seeking behavior. By confirming the mediation effect of feedback-seeking behavior, this study draws attention to the importance of feedback-seeking behavior that has long been overlooked in research about information system use. This study also explores the factors that promote feedback-seeking behavior which in result could affect end user`s faithful appropriation of information systems. In addition, this study provides insight about which inducements or resources SMEs should offer to promote individual users' feedback-seeking behavior when formal and sufficient support from IT staff or an outside information system provider is hardly expected. As the study results show, under the business environment of SMEs, help from skilled colleagues and the management plays a critical role. Therefore, SMEs should seriously consider how to utilize skilled peer information system users, while the management should pay keen attention to end users and support them to make the most of information systems.