• The Research Journal of the Costume Culture
• /
• v.14 no.3 s.62
• /
• pp.387-403
• /
• 2006

The purpose of this study was to develop a new torso pattern for the schoolgirl of a tween generation who had different somatotype from children and teenagers. The subjects in this study were female elementary school students of fifth or sixth grade. Through a sensory evaluation of four existing torso patterns, the first research torso pattern was developed. Drafting methods of each item, which closed to the optimum value three, were selected. The differences between the values of the selected drafting methods and the optimum three were verified through a Wilcoxon's ranked sum test. The final research torso pattern was developed through adjusting the drafting methods according to the deviation from the optimum value three. The schoolgirl of a tween generation is at the time to show the remarkable breast development compared with a waist circumference, so the bust drafting was defined as B/4+ 1.25cm separately front and back. The drafting of a waist circumference was defined as W/4+1cm separately front and back which taken the ease amounts of the somatotype into consideration of the schoolgirl of a tween generation. A princess line was used instead of a waist dart because their hip circumference was more developed than a waist circumference. The crossed amount of a front hemline was 0.3cm and that of a back hemline was 0.7cm. and the princess line of the position was drawn with a straight line at a right angle of the back waistline. The armhole depth was determined B/4-1cm in consideration of the aesthetic and the trend, although the effective movement of upper arm was required.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.8
• /
• pp.1132-1141
• /
• 2004

The purpose of this research was to ascertain the optimum rear slit length of tight skirts in terms of comfort and appearance. The typical measurements of tight skirts on current market were recorded and a questionnaire survey of women in their twenties was conducted in order to find out the current conditions of the skirts and specific complaints about motion restrictions. Just over half the respondents (50.4%) reported that they had experienced damage to the slit usually when they were stepping on a bus and also walking and running. The clothing test showed that the slit length increased as the motion went from "walking" to "going up stairs", and to "stepping on a bus" In addition the slit length significantly decreased as the hem circumference of skirt became wider. On the basis of those results, a wearing test, evaluating sensual comfort and appearance, was also conducted and the results showed that the slit length of 385mm was most prefered.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.63-72
• /
• 2018

The purpose of this study was to compare and analyze the pants pattern of the lower body of 70-85 aged women. I tried to present excellent pants pattern that is convenient and suitable for the activities of elderly women. Through this, I tried to provide basic data necessary for making elderly women 's pants. As a result of evaluating the appearance of the pants pattern according to the body type, the fit of the type 2 was evaluated as the highest in the item except the position of the front waist line. For the objective evaluation of the 3D simulation, the air gap of the pants by the body part analysis showed that there was not much difference in the air gap around the waist circumference, hip circumference, thigh circumference, and knee circumference by applying the same drawing method and body size. However, in type 2, the air gap of thigh and knee circumference parts was larger than that of type 1 and type 3. Because type 2's legs were thin but it used same size of hemline. It was thought that it is necessary to adjust the space of front and back crotch length to 1 inch (2.54 cm) instead of 1.9 cm (3/4 inch) so that the waistline position of all three types can be set up a little to cover the abdomen. This study was conducted to investigate changes in body shape of elderly women and to develop appropriate pants patterns.

• Fashion & Textile Research Journal
• /
• v.17 no.5
• /
• pp.781-792
• /
• 2015

This study aims to develop a spring/fall motorcycle jacket for quick service transporter. Depending on the results of the previous research, this study produced the tested jacket which was improved in material, pattern, and design. For the tested jacket, 100% polyester fabric excellent in strength, durability and abrasion-resistance was selected as a major material, and Cordura was used as a partial material to improve the strength and abrasion-resistance of the sleeve side lines, elbow and shoulder areas. The retro-reflection material was applied partially in order to improve visibility of the jacket in the night or in a dark place. A total of 7 pockets were composed in the jacket for the sufficient storage spaces. The functional design elements such as the 2-way zipper and the placket at the center front, the action pleats at the upper part of back armholes, the pit-zip at armpit were applied. In addition, the sleeve pattern was bent with the shape of elbow curvature in time of driving and the back length of the jacket was lengthened 4cm. As a result of the appearance assessment, there was a significant difference from the existing jacket in all items but chest size, shoulder width, cuffs circumference, and jacket hemline circumference. In motion adaptability and field activity appropriateness assessments, the assessment grade for all items was found to be commonly higher than that of the existing jacket, and thus, the tested jacket was assessed to be suitable for a motorcycle jacket design for the quick service transporters.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.9
• /
• pp.940-951
• /
• 2012

This study evaluates the fit preference of the tailored jacket according to body types for 20's adult women through a comparison of real and virtual fit. A five point fit evaluation scale utilizing a wearer acceptability scale by Shen and Huck was used to evaluate the degree of the preference of real and virtual fit. This scale contained 23 items in three categories: front fit, back fit, and side fit. For each item, 5 responses from 'too tight' fit (1 point) to 'too loose' fit (5 point) were possible. The middle position for each fit criterion indicated a 'good' fit (3 point). The data were analyzed with a t-test using statistical program SPSS 17.0. According to the results, there were no significant differences ($p{\leq}.05$) between the real and virtual fit preference in total measurement items such as front collar, lapel and roll line, front shoulder slope, front armhole, front waist, abdomen, sideseam, hemline, front silhouette, side shoulder, side armhole, side sleeve width, side hip, side silhouette, back collar stand, upper back, back armhole, back waist, back hip, back silhouette except front bust, side waist, and back center back. The factor that caused a difference in the fit preference between the real and virtual fit evaluation was a specific body type such as Body Type A that indicated a small bust circumference and a big hip circumference.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.7
• /
• pp.1173-1183
• /
• 1997

In order to flatter the figures of average middle aged women by determining harmonious proportions for their costume forms, this study evaluates effects of varying design details of jackets(coats) with blouses and slacks using a ranking test and paired comparisons test. The result from clothing design C-2 which has the best design effect were as follows; 1. In order to look taller, the jacket(coats) is divided vertical long line and it has the emphasis point close to the face. 2. In order to make shoulder width look wider, armhole seam line attached 1-2 cm from the shoulder point. 3. In order to make chest width look slimmer, division was made up of a tailored collar with a deep V-neckline. 4. In order to make waist circumference look slimmer, the jacket has more fitted waist line than loosed it and tailored collar with a deep V-neckline. 5. In the case of the division of upper and lower garments, when the division was closer to the golden section, i.e., when the jacket hemline is hipline and slacks length is the heel excluded length of shoe heels, the overall appearance was better. 6. The V-neckline looked better, when it was cut along a long acute angle to the waist line. Because of dividing along above factors 1-6 i.e., clothing design C-2 was overall harmonious. Appropriate division of costume forms made for an aesthetic composition, which flattered the body types of middle aged women and presented harmonious, beautiful costume design effects. It made the women look taller, slim and balanced, and highlighted middle aged women's sense of beauty.

• Journal of Fashion Business
• /
• v.25 no.3
• /
• pp.71-89
• /
• 2021

The purpose of this study was to design posture braces for rounded shoulders by examining characteristics of incorrect postures of rounded shoulders. The review of information in literature on rounded shoulder postures, correction exercise methods, and posture correction devices, has prompted this study to determine the design and material of a proper posture brace for rounded shoulders. In order to develop the pattern of a posture brace for rounded shoulders for women, the study carried out a comfort evaluation of the braces based on the 2D patterns through drafting method by utilizing the body measurements and relational formulae associated with the major body measurement such as bust circumference and on the 3D patterns of the brace which were obtained from 3D human model of women in their early 20s in Korea. Differences in angles were noted when 2D and 3D patterns of shoulder posture braces were compared. The side neck point was relocated farther outside in the 3D pattern to allow additional flexibility in the back-neck area, and the shoulder band was lowered by 14.8°, increasing armhole area comfort. The upper hemline of the front panel was found to rotate upward at an angle of 22.0° as the underarm point of the 3D pattern moved upwards than the underarm point of the 2D pattern, which enhanced comfort in the abdomen area. The 3D designs of shoulder posture brace was preferred in this study, as they significantly improved comfort while conducting fit evaluation compared to the 2D patterns of shoulder posture brace.