• Computers and Concrete
• /
• v.20 no.6
• /
• pp.731-738
• /
• 2017

Reinforced concrete flat plates consist of slabs supported directly on columns. The absence of beams makes these systems attractive due to advantages such as economical formwork, shorter construction time, less total building height with more clear space and architectural flexibility. Punching shear failure is usually the governing failure mode of flat plate structures. Punching failure is brittle in nature which induces more vulnerability to this type of structure. To analyze the flat plate behavior under punching shear, twelve finite element models of flat plate on a column with different parameters have been developed and verified with experimental results. The maximum range of variation of punching stress, obtained numerically, is within 10% of the experimental results. Additional finite element models have been developed to analyze the influence of integrity reinforcement, clear cover and column reinforcement. Variation of clear cover influences the punching capacity of flat plate. Proposed finite element model can be a substitute to mechanical model to understand the influence of clear cover. Variation of slab thickness along with column reinforcement has noteworthy impact on punching capacity. From the study it has been noted that integrity reinforcement can increase the punching capacity as much as 19 percent in terms of force and 101 percent in terms of deformation.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.1
• /
• pp.34-44
• /
• 2023

Objective: The purpose of this study was to examine the effects of increasing running speed on human stability by comparing the Lyapunov Exponent (LyE) and Coefficient of Variation (CV) methods, with the goal of identifying key variables and uncovering new insights. Method: Fourteen adult males (age: 24.7 ± 6.4 yrs, height: 176.9 ± 4.6 cm, weight: 74.7 ± 10.9 kg) participated in this study. Results: In the CV method, significant differences were observed in ankle (flexion-inversion/eversion; p < .05) and hip joint (internal-external rotation; p < .05) movements, while the center of mass (COM) variable in the coronal axis movements showed a significant difference at the p < .001 level. In the LyE method, statistical differences were observed at the p < .05 level in knee (flexion-extension), hip joint (internal-external rotation) movements, and COM across all three directions (sagittal, coronal, and transverse axis). Conclusion: Our results revealed that the stability of the human body is affected at faster running speeds. The movement of the COM and ankle joint were identified as the most critical factors influencing stability. This suggests that LyE, a nonlinear time series analysis, should be actively introduced to better understand human stabilization strategies.

• Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.196-206
• /
• 2020

Background: The Himalayan forests are of great importance to sustain the nature and community resource demands. These forests are facing pressures both from anthropogenic activities and ongoing global climatic changes. Poor natural regeneration has been considered a major problem in mountainous forests. To understand the population structure and regeneration status of Larix (Larix griffithiana and Larix himalaica), we conducted systematic vegetation surveys in three high-altitude valleys namely Ghunsa (Kanchenjunga Conservation Area, KCA), Langtang (Langtang National Park, LNP), and Tsum (Manaslu Conservation Area, MCA) in Nepal Himalaya. The average values of diameter at breast height (DBH), height, and sapling height were compared for three sites and two species using Kruskal-Wallis test. Population structure was assessed in terms of proportion of seedlings, saplings, and trees. Regeneration was analyzed using graphical representation of frequencies of seedlings, saplings, and trees in histograms. Results: The results showed that the population structure of Larix in terms of the proportion of seedling, sapling, and tree varied greatly in the three study areas. KCA had the highest record of seedling, sapling, and tree compared to other two sites. Seedlings were the least among three forms and many plots were without seedlings. We found no seedling in MCA study plots. The plot level average DBH variation among sites was significant (Kruskal-Wallis χ² = 7.813, df = 2, p = 0.02) as was between species (Kruskal-Wallis χ² = 5.9829, df = 1, p = 0.014). Similarly, the variation in average tree height was significant (Kruskal-Wallis χ² = 134.23, df = 2, p < 0.001) among sites as well as between species (Kruskal-Wallis χ² = 128.01, df = 1, p < 0.001). All the sites showed reverse J-shaped curve but more pronounced for KCA and MCA. In comparing the two species, Larix griffithiana has clear reverse J-shaped diameter distribution but not Larix himalaica. Conclusion: The varied responses of Larix manifested through regeneration status from spatially distinct areas show that regeneration limitations might be more pronounced in the future. In all the three studied valleys, regeneration of Larix is found to be problematic and specifically for Larix griffithiana in MCA and Larix himalaica in LNP. To address the issues of disturbances, especially serious in LNP, management interventions are recommended to sustain the unique Himalayan endemic conifer.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.67-73
• /
• 2009

Compared to the chip-bonding process utilizing solder bumps, flip chip process using Cu pillar bumps can accomplish fine-pitch interconnection without compromising stand-off height. Cu pillar bump technology is one of the most promising chip-mounting process for RF packages where large gap between a chip and a substrate is required in order to suppress the parasitic capacitance. In this study, Cu pillar bumps and Sn bumps were electroplated on a chip and a substrate, respectively, and were flip-chip bonded together. Contact resistance and chip shear force of the Cu pillar bump joints were measured with variation of the electroplated Sn-bump height. With increasing the Sn-bump height from 5 ${\mu}m$ to 30 ${\mu}m$, the contact resistance was improved from 31.7 $m{\Omega}$ to 13.8 $m{\Omega}$ and the chip shear force increased from 3.8 N to 6.8 N. On the contrary, the aspect ratio of the Cu pillar bump joint decreased from 1.3 to 0.9. Based on the variation behaviors of the contact resistance, the chip shear force, and the aspect ratio, the optimum height of the electroplated Sn bump could be thought as 20 ${\mu}m$.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.94-110
• /
• 2003

This study utilizes the dataset of Topex/Poseidon(T/P) altimeter sea surface height (1992-2000 yr., 286 cycles)to investigate the tempore-spatial variability in the East (Japan) Sea. Optimal interpolation (Ol) technique was applied to the pre-processed T/P dataset (level 2) to produce sea surface height anomaly (SSHA) map on regular grids. Spectral analyses of the timeseries of the SSHA at chosen stations and empirical orthogonal function (EOF) analysis of the SSHA in the entire East Sea were made. Distribution of the SSHA can be divided by the southern and northern regions sharply by the polar front situated in the middle of the East Sea. The southern region under the direct influence of the Tsushima Current exhibits higher amplitude of the SSHA fluctuation, while the northern region does relatively smaller one. The spatio-temporal variability of the SSHA in the East Sea can be characterized by the five modes of the EOFs accounting for more than 85% of the total variance. The first mode dominates the SSHA variation in the entire domain with strong seasonal and inter-annual periods accounting for the 72.3% of the total variance. The other modes (up to 5th account for 14%) are responsible for the SSHA variation associated with the local current system, meandering of the polar frontal axis, and mesoscale eddies. Spectral peaks with significant confluence level show semi-annual, annual and interannual (2, 3-4 years) periods.

• The Korean Journal of Ecology
• /
• v.27 no.1
• /
• pp.35-41
• /
• 2004

Phragmites australis is the dominant and constructive species among plant communities in the wetlands of the downstream of Yellow River, China. Its morphological characters were high variable in different habitats. Studies on Morphological and RAPD variation of 15 P. australis populations from this region showed that soil salinity was the dominant ecological factor that affected the morphological characters of P. australis. The basal diameter, height, leaf length, leaf width, internode length, internode accounts, panicle length were negatively related to salinity. 194 loci were amplified by RAPD, of which 9 loci was highly negative-related to salinity, and showed a tendency to prefer the habitats with fresh water. 4 loci were positively related to the salinity, and showed a tendency to prefer the salinized habitats. Most loci were neutral to salinity. The morphological and genetic characters of BZH were special, and the speciality should not be determined by salinity. The morphological characters were affected by genetic information and environment. The morphological characters should change gradually and continuously along environmental gradient under plasticity, but should changed continuously or not in genetic control. The relevancies among quantitive characters, ecological factors and genetic variation in natural populations still will still be a focus and difficulty of ecological genetics of P. australis in the future.

• Korean Journal of Agricultural Science
• /
• v.24 no.1
• /
• pp.6-10
• /
• 1997

Ninety-four collections of domestic ginger were evaluated for plant hight, leaf number, stem number, leaf length and width, rhizome yield per plant revealed good variability in stem number and rhizome yield per plant. Moderate variation was observed in plant hight, leaf number, leaf length, leaf width and stem diameter. Rhizome yield per plant was positively correlated with six characters, and leaf number, plant height and stem diameter were positive significant correlation with rhizome yield per plant. Path coefficient analysis indicated that stem number, followed by leaf number, stem diameter, had maximum direct effects on rhizome yield per plant. Maximum indirect effect was observed in case of plant height through leaf number. The indirect effects of leaf length and leaf width through leaf number, and plant height, leaf length and leaf width through stem diameter were also observed. From the selection point of view, the characters like plant height, stem number and leaf number per clump may be considered suitable in choosing a good genotype.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.616-624
• /
• 2011

The flow characteristics and heat transfer augment on the periodically arranged semi-circular ribs in a rectangular channel for turbulent flow has been investigated numerically. The aspect ratio of the rectangular channel was AR=5, the rib height to hydraulic diameter ratio were 0.07 and rib height to channel height ratio was set as e/H=0.117 for various PR(rib pitch-to-rib height rate) between 8~14, respectively. The SST k-${\omega}$ turbulence model and v2-f turbulence model were used to find out the heat transfer and the flow characteristics of near the wall which are suited to obtain realistic phenomena. The numerical analysis results show turbulent flow characteristics, heat transfer enhancement and friction factor as observed experimentally. The results predict that turbulent kinetic energy(k) is closely relative to the diffusion of recirculation flow. and v2-f turbulence model simulation results have a good agreement with experimental values.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.6
• /
• pp.780-788
• /
• 2013

This study attempted to determine important meteorological parameters related to airborne pollen concentrations in urban areas. Hourly pollen measurement data were prepared from a regular sampling with a volumetric Burkard spore trap at a site in the Ulsan city, during the spring season (March~May) of 2011. Results showed that the daily mean and maximum concentrations for total pollen counts during the spring season were statistically significantly correlated with both air temperature and wind speed; daily mean pollen concentration was the most highly related to daily maximum temperature (r=0.567, p<0.001). It was also identified that pollen concentration has a stronger relationship with wind speed at the rural site than at the urban one, which confirms that strong wind conditions over the pollen sources area can be favorable for pollen dispersal, resulting in increases in airborne pollen concentrations downwind. From the results of an oak-pollen episode analysis, it was found that there was a significant relationship between hourly variation of oak pollen concentrations and dynamic meteorological factors, such as wind and mixing height (representing the boundary layer depth); especially, a strong southwestern wind and elevated mixing height was associated with high nocturnal concentrations of oak pollen. This study suggests that temperature, wind, and mixing height can be important considerations in explaining the pollen concentration variations. Additional examination of complex interactions of multiple meteorological parameters affecting pollen behavior should be carried out in order to better understand and predict the temporal and spatial pollen distribution in urban areas.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.4 no.2
• /
• pp.52-60
• /
• 2001

The need to control the oil content in oily bilge water discharges to meet the increasing stringent seawater pollution standards has led to the development of gravity type separators. Among the several gravitational methods, a plate type oily water separator can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is believed to be an efficient method dealing with a large amount of rich oil with high specific gravity. The purpose of this paper is to examine the efficiency of oil/water separation with the characteristics of separating plate arrangement. An experimental study was carried out to analyse an efficient treatment oil-water mixture with variation of operating parameters, including flow rates, inlet oil concentrations and the height between the plates. The experimental results show that the height between the plates has a significant effect on the separation efficiency. The best efficiency was acquired when the ration of the height between the plates the plates to distance(H/Ci) was 2 with lower inlet oil concentration and lower flow rate.