• Korean journal of food and cookery science
• /
• v.30 no.3
• /
• pp.333-339
• /
• 2014

The purpose of this study was to evaluate the quality properties of muffin added with different concentration (0, 1, 3, and 5%) of ginseng leaves powder, which is discarded in the process of ginseng. Density of muffin was the highest at 1.45 g/mL in control, and pH (7.41) was at the highest level as well. There was no tendency at the bottom and upper dimensions according to addition of ginseng leaf powder. The height and baking loss rate of the muffins increased with increase in the powder concentration, but there were no significant differences. The weight of muffins did not show constant tendency, according to addition ratio of ginseng leaves powder. The degree of lightness and yellowness of muffin decreased as the concentration of the powder increased, whereas no significant difference in the redness was found with increased powder concentration. The factors of hardness and chewiness were higher at the control group and cohesiveness was the highest at 0.65 in 3% group, but springiness and gumminess did notshow significant differences. DPPH free radical scavenging activity of muffins was significantly increased with increasing ginseng leaves powder (p<0.05). For the sensory evaluation in 1% group, the intensity of color, smell, taste, softness, and moistness was the lowest, whereas the overall acceptability score of color, smell, taste, chewiness, and moistness was the highest. Thesensory properties of muffin linearly decreased as the concentration of ginseng leaves powder increased. Taken together, the results of this study suggest that ginseng leaf powder is a good ingredient for increasing the consumer acceptability and functionality of cookies.

• Culinary science and hospitality research
• /
• v.16 no.1
• /
• pp.13-23
• /
• 2010

The principal objective of this study was to develop the optimal recipe for muffins prepared with replacement of sucrose with trehalose. The effects of trehalose on properties and staling of muffins during storage days(0, 1, 3, 5 days) were evaluated in terms of height, volume, weight, specific volume, baking loss rate, crumbscan, colorimeter, texture analyzer and sensory evaluation. Crust thickness of muffins containing trehalose evaluated with crumbscan decreased as the content of trehalose increased. Lightness(L value) of muffins with trehalose increased for the storage days, but muffins without trehalose decreased. yellowness(b value) increased significantly as the trehalose content increased. Hardness value of muffins was reduced by adding trehalose; however, the resilience value of muffins with trehalose increased significantly. Finally, the sensory evaluation revealed that muffins with 25% of trehalose showed the best result in texture, taste and overall preference.

• Structural Engineering and Mechanics
• /
• v.75 no.6
• /
• pp.643-657
• /
• 2020

This study presents experimental and numerical investigations on circular steel tube confined ultra high performance concrete (UHPC) columns under axial compression. The plain UHPC without fibers was designed to achieve a compressive strength ranged between 150 MPa and 200 MPa. Test results revealed that loading on only the UHPC core can generate a significant confinement effect for the UHPC core, thus leading to an increase in both strength and ductility of columns, and restricting the inherent brittleness of unconfined UHPC. All tested columns failed by shear plane failure of the UHPC core, this causes a softening stage in the axial load versus axial strain curves. In addition, an increase in the steel tube thickness or the confinement index was found to increase the strength and ductility enhancement and to reduce the magnitude of the loss of load capacity. Besides, steel tube with higher yield strength can improve the post-peak behavior. Based on the test results, the load contribution of the steel tube and the concrete core to the total load was examined. It was found that no significant confinement effect can be developed before the peak load, while the ductility of post-peak stage is mainly affected by the degree of the confinement effect. A finite element model (FEM) was also constructed in ABAQUS software to validate the test results. The effect of bond strength between the steel tube and the UHPC core was also investigated through the change of friction coefficient in FEM. Furthermore, the mechanism of circular steel tube confined UHPC columns was examined using the established FEM. Based on the results of FEM, the confining pressures along the height of each modeled column were shown. Furthermore, the interaction between the steel tube and the UHPC core was displayed through the slip length and shear stresses between two surfaces of two materials.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2465-2470
• /
• 2008

A new surface shape of an internal cooling passage which largely reduces the pressure drop and enhances the surface heat transfer is proposed in the present study. The surface shape of the cooling passage is consisted of the concave dimple and the riblet inside the dimple which is protruded along the stream-wise direction. Direct Numerical Simulation (DNS) for the fully developed turbulent flow and thermal fields in the cooling passage is conducted. The Numerical simulations for the 5 different surface shapes are conducted at the Reynolds number of 2800 based on the mean bulk velocity and channel height and Prandtl number of 0.71. The driving pressure gradient is adjusted to keep a constant mass flow rate in the x direction. The thermo-aerodynamic performance for the 5 different cases used in the present study was assessed in terms of the drag, Nusselt number, Fanning friction factor, Volume and Area goodness factor in the cooling passage. The value of maximum ratio of drag reduction is -22.86 [%], and the value of maximum ratio of Nusselt number augmentation is 7.05 [%] when the riblet angle is $60^{\circ}$ (Case5). The remarkable point is that the ratio of Nusselt number augmentation has the positive value for the surface shapes which have over $45^{\circ}$ of the riblet angle. The maximum Volume and Area goodness factor are obtained when the riblet angle is $60^{\circ}$ (Case5).

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.105-112
• /
• 2013

The new renewable energy became popular as a clean and sustainable alternative energy under the circumstances that the entire world is facing severe abnormal climate due to the use of fossil fuel, and among which, solar energy can be obtained anywhere and is not difficult to apply it into the existing buildings, which makes it possible to be widely distributed. However, as PV module is installed into a single plate system, it shows structural weaknesses which are vulnerable to wind load and give loss to design elements in external appearance. Accordingly, this study planned one-step parallel system to complement the problems occurring from a single plate system and used STAR-CCM+ V.8 made by CD-Adapco, a computational fluid dynamics(CFD) simulation tool to measure wind load stability and support based on the design standards for a single plate system and one-step parallel system. Building height was limited to less than 10m and wind speed was given when increasing from 35m/s to 50m/s by 5m/s on PV system installed into the flat roof. In this case, our analysis suggested that step-one parallel system was in class 7-9 according to Beaufort's wind power classification, which did not have an impact on the fixed PV system, and the single plate system is considered to cause risks in designing wind speed in central districts because it is more than wind power class 12.

• Korean Journal of Environment and Ecology
• /
• v.23 no.4
• /
• pp.302-308
• /
• 2009

For the proper tree management of Taxus cuspidata, distributed in the High 1 Ski Slope construction area in Baekwoonsan, Jeungsun-gun, Kangwon-do, the growing states of 323 trees(including transplanted 57trees) are investigated. Tree height, rootcollar diameter, D.B.H., stem condition, apical shoot, dead branch, needle growth condition, 2-year-old needle loss, root condition, tree form are investigated. Taxus cuspidata are mainly growing at the sites, high elevated mountain ridge or slopes facing north. Growing states of Taxus cuspidata, distributed in Baekwoonsan are relatively better than those of Taxus cuspidata and Abies koreana at other subalpine zone in Korea. Damaged trees are mainly due to root-removal through transplanting, root-damages by raising the ground level and digging. Several methods of Taxus cuspidata conservation were suggested.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.69-78
• /
• 2001

Alveolar cleft exists in 75% of cleft patients, In alveolar cleft patients, alar base is widening, palatal fistular formation, maxillary growth disturbance & tooth loss of adjacent area is raised, Alveolar bone grafting, especially iliac bone grafting, is a general treatment method. As operation timing, bone grafting is classified with primary, early secondary, secondary, & late secondary, Here we report cleft width, marginal bone height, bone resorption rate, grafted shape & bone densities after secondary iliac bone grafting was done in the Dept. of oral and maxillofacial surgery of chonbuk national university hospital. We compared cleft width to bone resorption rate and grafted shape. Also, alveolar bone densities of grafted and contralateral site was compared with Emago 3 package? (Oral Diagonostic System, The Netherlands), The data obtained were analyzed using Spearman's rho coefficients and sign test with SPSS for window, The results were obtained as follows. 1. As alveolar cleft width is increase, bone resorption rate is, too. This relation showed significant difference(P<.01). 2, In proximal & distal area, alvolar cleft width and bone graft contour after bone grafting had a reverse proportional difference. It was not significant difference(P>.05). 3. After 3 month, in bone density results by using Emago 3 package? with periapical standard view, occlusal view & panoramic view, differences between grafted bone and alveolar bone of contralateral site didn't show a significant difference(P>.05). Thus, differences of bone densities in the alveolar bones didn't exist.

• Corrosion Science and Technology
• /
• v.6 no.5
• /
• pp.233-238
• /
• 2007

Due to the occasional occurrence of a localizedcorrosion such as a SCC and pitting in steam generator tubing(Alloy 600), leading to a significant economical loss, an effective repair technology is needed. For a successful electrodeposition inside a tube, many processes should be developed. Among these processes, an anode to be installed inside a tube, a degreasing condition to remove any dirt and grease, an activation condition for a surface oxide elimination, a strike layer forming condition which needs to be adhered tightly between an electroforming layer and a parent tube and a condition for an electroforming layer should be established. Through a combination of these various process condition parameters, the desired material properties can be acquired. Among these process parameters, various material properties including a mechanical property and its variation along with the height of the electrodeposit inside a tube as well as its thermal stability and SCC resistance should be assessed for an application in a plant. This work deals with the material properties of the Ni electrodeposits formed inside a tube by using the anode developed in this study such as the current efficiency, hardness, tensile property, thermal stability and SCC behavior of the electrodeposit in a 40wt% NaOH solution at $315^{\circ}C$. It was found that a variation of the material properties within the entire length of the electrodeposit was quite acceptable and the Ni electrodeposit showed an excellent SCC resistance.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.20 no.1 s.32
• /
• pp.228-238
• /
• 2007

Objectives ; Sasang Constitional Medicine is a part of Korean traditional Medicine, and classify human constitution into four types. Scalp and hair is a part of skin. Skin is one of constitutional charasteristic element. So we researched a correlation between Sasang constitutions and Korean adult scalp and hair condition. This is a basic study to find constitution can be a important factor to care scalp and hair. Methods ; We examined Sasang constitutions and scalp and hair condition of 80 human who aged from 20-50. Scalp disease, dandruff was observed by video micro scope and sebum tape diagnosis. Thickness of hair was measured by Laser Scan Micrometer(LSM-3100). Itching sense and life habit was also investigated. Constitution diagnosis and scalp, hair diagnosis was investigated seperately as a blind test and the data was statistically analyzed with chi-square test, correlation analysis, one-way analysis of varience. Results ; 1. In Sasang Constitution, Taeumin group had significant tendency of oilily scalp. 70% of Taeumin group had oilily scalp. 2. The group of dry or oilily scalp had more itching sense and more sensativity of scalp compaired to neuter scalp group. 3. There was no correlation between height, weight, thickness of hair, itching sense, scalp disease and Sasang constitution. 4. There was correlation between loss of hair and drinking alcohol, obesity, curly hair, soft scalp. Conclusions ; Korean adult scalp and hair condition had correlation with Sasang constitution.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.4
• /
• pp.375-381
• /
• 2015

In this study, high performance concrete of C60 and C80 were applied to a super tall building and those had satisfactory properties of fresh and hardened concrete to the requirements even changes according to time. Especially the evaluation and analysis of the relation of the rheological properties and puMPability of high performance concrete, C60-14 which was applied to the height of from 500m to 575m in the building, was carried out bymeasuring pumping pressure and pumping speed, testing concrete properties at before and after pumping. As results, themax. pumping pressure showed increase of 5% at every 25m higher pumping and the average pumping speed showed the above $25m^3$ per hour whichmeans proper productivity. Additionally it was verified that the loss of slump flow after pumping was increased according to plastic viscosity values and the increment of temperature through concrete pumping.