• Nutrition Research and Practice
• /
• v.9 no.3
• /
• pp.268-277
• /
• 2015

BACKGROUND/OBJECTIVES: Although it is crucial to identify those children likely to be treated in an appropriate nutrition rehabilitation programme and discharge them at the appropriate time, there is no golden standard for such identification. The current study examined the appropriateness of using Mid-Upper Arm Circumference for the identification, follow-up and discharge of malnourished children. We also assessed its discrepancy with the Weight-for-Height based diagnosis, the rate of recovery, and the discharge criteria of the children during nutrition rehabilitation. SUBJECTS/METHODS: The study present findings from 156 children (aged 6-59 months) attending a supplementary feeding programme at Makadara and Jericho Health Centres, Eastern District of Nairobi, Kenya. Records of age, weight, height and mid-upper arm circumference were selected at three stages of nutrition rehabilitation: admission, follow-up and discharge. The values obtained were then used to calculate z-scores as defined by WHO Anthro while estimating different diagnostic indices. RESULTS: Mid-upper arm circumference single cut-off (< 12.5 cm) was found to exhibit high values of sensitivity, specificity, positive predictive value, negative predictive value, positive likelihood ratio, negative likelihood ratio at both admission and discharge. Besides, children recorded higher rate of recovery at 86 days, an average increment of 0.98 cm at the rate of 0.14mm/day, and a weight gain of 13.49gm/day, albeit higher in female than their male counterparts. Nevertheless, children admitted on basis of low MUAC had a significantly higher MUAC gain than WH at 0.19mm/day and 0.13mm/day respectively. CONCLUSIONS: Mid-upper arm circumference can be an appropriate tool for identifying malnourished children for admission to nutrition rehabilitation programs. Our results confirm the appropriateness of this tool for monitoring recovery trends and discharging the children thereafter. In principle the tool has potential to minimize nutrition rehabilitation costs, particularly in community therapeutic centres in developing countries.

• Journal of Korean Academy of Nursing
• /
• v.36 no.8
• /
• pp.1331-1339
• /
• 2006

Purpose. The purpose of this study was to test the effects of infant massage (auditory (mother's voice), tactile/ kinesthetic (massage) and visual (eye to eye contact) stimulation) on weight and height of infant and mother-infant interaction with normal infants over a period of 4 weeks. Method. This study was designed as a nonequivalent control group pretest-posttest design. The experimental group infants (aged 2-6 months) participated in one of the infant massage programs at the health district center for 4 weeks. The control group (N=26) was paired with the experimental group (N=26) by matching the infant's age and sex. Infant weight, height, and mother-infant interaction were measured two times and recordings of the mother-infant interaction were done using the video equipment in a room at the health center for 10 minutes. Results. After 4 weeks of massage, there were no significant differences weight gain and height increase between the two groups. Comparison of the total scores for the mother-infant interaction between the two groups showed a significant difference (t=5.21, p=.000). There were also significant differences on maternal response (t=3.78, p=000), infant response (t=5.71, p=000) and dyadic response (t=4.05, p=000) in the mother-infant interaction between the two groups. Conclusion. Overall, the results of this study reassure that infant massage facilitates the mother-infant interaction for infants and mothers who give massage to their baby.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2427-2433
• /
• 2015

A high-gain circularly-polarized patch antenna with a double-layered superstrate is proposed operating at a wireless LAN frequency. A superstrate has an array of metallic periodic unit cells and is located above the patch antenna with an air-gap. The designed antenna has a high gain of over 9.59dBi, which is the gain enhancement of 6.48dB compared to the patch antenna without superstrate. And it has a low axial ratio of under 3dB, so that it maintains the circular polarization of the patch antenna. The optimum air-gap height at the superstrate of $4{\times}4$ arrays is 25mm, which is equivalent to about $0.2{\lambda}$ at the frequency of 2.45GHz. We confirmed that the double-layered stacking of a superstrate increases the effective aperture size and hence it leads to enhance a gain of the patch antenna.

• Clinical and Experimental Pediatrics
• /
• v.51 no.3
• /
• pp.248-255
• /
• 2008

Purpose : The purpose of this study was to evaluate the attitudes of middle-school students about height and their behaviors related to height gain. Methods : One thousand four hundred twenty two middle-school students were included. We requested that the students complete a battery of questionnaires asking about problems associated with height. Results : There was a clear difference between real height and desired height. Most students (83.7%) had height dissatisfaction. Most students (91.1%) were concerned about their height. Few students made efforts to improve their height, even though most students had height dissatisfaction and were concerned about their height. Herbal medicine had a tendency to become popularized in treatments for height. Students generally did not judge their friends by height, but there was a small tendency to ignore shorter friends and to feel a sense of inferiority around taller friends. Most students had a greater desire to have a beautiful face than a good body, especially to be tall. Most students thought that there would be some handicaps in life if they had a short stature. Conclusion : The attitudes and concerns about height in adolescence should be understood, and recognized as one aspect of treatment for problems associated with height.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1996.04a
• /
• pp.95-100
• /
• 1996

This paper presents the experimental study on hardening process of high-strength and high-flowable concrete. The experiments were performed to investigate any unfavorable construction situations since the actual concrete placement has been scheduled in cold weather period, so that the high quality concrete construction is convinced to be successfully carried out. The tests were conducted using 600nm and 1000nm height of steel tube to simulate the practical concrete filled steel tube columns according to the following variables as: the categories of chemical admixtures, curing temperatures and curing schemes. The test results were analyzed in terms of hardening speed, internal heat of hydration and history of strength gain. This paper emphasizes the importance of curing schemes on durability and the use of hardening accelerators on strength gain.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.9 no.1
• /
• pp.25-30
• /
• 2013

The periodic inspection of piping and pressure vessels welds in nuclear power plant has to provide reliable result related to weld flaws, such as location, maximum amplitude response, ultrasonic length, height and finally the nature or flaw pattern. The founded flaw in ultrasonic inspection is accepted or rejected based on these data. Specially, the amplitude of flaw response is used as basic parameter for flaw sizing and it may cause some deviation in length sizing result. Currently the ultrasonic inspections in nuclear power plant components are performed by specific inspection procedure which describing inspection technique include inspection system, calibration methodology and flaw characterizing. To perform ultrasonic inspection during in-service inspection, reference gain should be established before starting ultrasonic inspection by the requirement of ASME code. This reference gain used as basic criteria to evaluate flaw sizing. Sometimes, a little difference in establishing reference gain between calibration and field condition can lead to deviation in flaw sizing. Due to this difference, the inspection result may cause flaw sizing error. Therefore, the objective of this study is to compare and evaluate the ultrasonic amplitude difference between air filled and water filled pipe in nuclear power plant. Additionally, the accuracy of flaw sizing is estimated by comparing both conditions.

• Journal of electromagnetic engineering and science
• /
• v.14 no.2
• /
• pp.74-78
• /
• 2014

This paper presents a modified TEM horn that improves radiation characteristics at a low frequency region. The proposed antenna consists of an asymmetric TEM (ATEM) horn and a loop structure with an elliptical shape. The bandwidth and gain at low frequency region can be enhanced by using the ATEM horn configuration and adding a loop structure with an elliptical shape to the ATEM horn. The bandwidth of the proposed antenna is from 2.14 to over 20 GHz, whereas that of the conventional TEM horn is from 2.7 to over 20 GHz, where the dimensions of both antennas are the same except for the thickness of the loop structure. The physical and electrical dimensions of the proposed antenna are $60mm{\times}62.5mm{\times}64mm$ ($width{\times}height{\times}length$) and $0.428{\lambda}_L{\times}0.445{\lambda}_L{\times}0.456{\lambda}_L$, where ${\lambda}_L$ corresponds to the lowest frequency of the bandwidth. The realized gain of the proposed antenna is improved by 0.802 dB on average at the low frequency region (2 to 8 GHz), where the maximum gain increase is 2.932 dB when compared to a conventional TEM horn.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.4
• /
• pp.341-351
• /
• 1991

Sixteen Holstein heifer calves were used in an 112-day trial to study the effects of probiotic supplementation on growth performance and rumen metabolism. Calves were divided into four groups of four calves each, with two groups receiving the probiotic supplement and two groups serving as controls. Calves were limited to 1.6 kg dry matter of a corn-barley based grain mix per day. Long-stem bromegrass hay was fed as forage the first 56 days and bromegrass silage the last 56 days of the trial. Probiotic (28 g/d/calf) was fed along with the grain mix twice daily. Data were analyzed for the entire trial and also for the separate hay and silage feeding periods. Total weight gain and average daily gain were not affected (p>.05) by probiotic supplementation. Dry matter intake was lower (p<.05) and feed efficiency (kg feed/kg weight gain) was improved slightly during the hay feeding period for the probiotic-supplemented calves. Wither height gain was greater (p<.05) during the hay period and lower (p<.05) during the silage period for probiotic-supplemented calves. Heart girth gain was improved (p<.07) by probiotic supplementation, particularly during the hay feeding period (p<.05). Total rumen volatile fatty acid (VFA) concentration was higher (p<.05) with the probiotic-supplemented calves. Molar proportions of individual VFA were not affected (p>.05). Rumen ammonia-N and plasma urea-N concentration were lower (p<.05) for probiotic-supplemented calves during the hay feeding period. Total tract nutrient digestibility was not affected (p>.05). Some improvements in animal performance and changes in rumen and blood metabolites were observed when calves were supplemented with probiotic. Effects due to probiotic supplementation were most pronounced during the hay feeding period.

• Journal of Forest and Environmental Science
• /
• v.24 no.1
• /
• pp.41-46
• /
• 2008

Progeny tests of Abies holophylla were established with 32 open-pollinated families at Hwaseong and Gangneung in 1994. Growth characteristics (height, DBH and volume index) were measured at the age of 15, showing that Gangneung site showed in general better performance than Hwaseong site. Analysis of variance (ANOVA) of the growth characteristics showed that there was a significant difference among families in Gangneung but not in Hwaseong, and Hwaseong site showed that DBH and volume index were statistically different among replications. At Gangneung site, family ${\times}$ replication interaction was significant in DBH and volume index. Based on the combined analysis of both sites, all characteristics except height showed highly significant differences between sites and among families. On the other hand, family ${\times}$ replication interaction was not significant, implying that growth pattern of families could be similar at Gangneung and Hwaseong. Individual heritabilities ($hi^2$) at Gangneung were 0.485 in height, 0.611 in DBH and 0.538 in volume index, and the values of $hi^2$ at Hwaseong were 0.121 in height, 0.054 in DBH and 0.080 in volume index, respectively. Based on both sites, $hi^2$ was estimated as 0.204 in height, 0.326 in DBH and 0.238 in volume index. Individual heritabilities (0.054~0.611) were lower than family heritabilities (0.089~0.723) for all growth characteristics. Realized gain was estimated to be 2.5% in height, 9.2% in DBH and 23.6% in volume. When inferior families (about 50% of all families) are genetically thinned from a seed orchard, genetic gain would be 9.55% in height, 17.0% in DBH and 46.8% in volume.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.245-248
• /
• 2005

In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.