• Korean Journal of Community Nutrition
• /
• v.22 no.2
• /
• pp.159-170
• /
• 2017

Objectives: The purpose of this study was to estimate the distribution and exposure prevalence of total carbohydrate intake and the carbohydrate-based foods such as rice, noodles, sweet potatoes, sweet drinks, milk and fruits and to characterize intake patterns among obese Korean adults. Methods: Subjects included 137,363 adults aged 40 years or older who participated in a Health Examinees (HEXA) Study. Multiple regression analysis of data from Semi-Quantitative Food Frequency Questionnaire (SQFFQ) identified food sources of carbohydrates. Weight, height and waist circumstance (WC) were measured, and the body mass index (BMI) was calculated. Obesity was defined as $BMI{\geq}25kg/m^2$ and abdominal obesity as $WC{\geq}90cm$ and ${\geq}85cm$ for males and females, respectively. Results: Obese adults appeared to have a higher total carbohydrate intake in the univariate analysis but had eaten less after adjustment for general and lifestyle factors, compared to normal weight adults (OR 0.78, 95% CI 0.73-0.82 for general obesity; OR 0.79, 95% CI 0.74-0.85, for abdominal obesity; P trend < 0.0001, respectively). Based on advance analysis for the food sources of carbohydrates, obese subjects had lower intake of rice (OR 0.86, 95% CI 0.68 -1.09 for general obesity; OR 0.87, 95% CI 0.67-1.13, for abdominal obesity; P trend < 0.0001, respectively) and higher intake of noodles (OR 1.21, 95% CI 1.16-1.27 for general obesity; OR 1.25, 95% CI 1.19-1.32, for abdominal obesity; P trend < 0.0001 respectively). With regard to other food sources of carbohydrates such as milk and fruits, intake was lower among obese compared to normal weight subjects. Conclusions: In the Korean middle-aged and older obesity groups, the intake of carbohydrates and the related foods was lower than in normal weight subjects, except for noodles. We conclude that a higher intake of noodles may enhance weight-gain. Therefore, this study suggested that the guidelines should consider the types of carbohydrate sources and the amount consumed from foods in order to provide proper guidance with regard to control and prevent obesity among Korean adults.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.853-856
• /
• 2008

Lightweight foamed concretes are mainly used in apartment building construction for building room floor insulation, sound proof and height difference adjustment, etc. However, existing lightweight foamed concretes have problems like volume reduction by foam removal and excessive crack occurrence, etc, and for compensation, they developed improved concrete binders for lightweight foamed concrete with special characteristics by adding admixture materials used in concrete manufacturing. Therefore, this study reviewed the possibility of its practical use by analyzing all the engineering characteristics after producing imitation member proposed as actual binders and piling lightweight foamed concrete as improved lightweight foamed concrete binder through prior study, the results are as follows. Plain in which various pulverulent materials are mixed showed about 230mm of flow value, satisfying the target flow value, and at 100mm member, about 4mm of settlement occurred, showing a settlement depth reduction effect double the OPC. On strength, OPC showed highest value, but the three levels all showed strengths above the specified value of KS standard 0.5 grade. From the analysis of drying shrinkage member crack, plain, about 0.1mm, was shown very excellent against drying shrinkage crack.

• Korean Journal of Community Nutrition
• /
• v.24 no.6
• /
• pp.465-475
• /
• 2019

Objectives: This study investigated dietary and lifestyle factors associated with the weight status among Korean adolescents in multicultural families. Methods: This cross-sectional study analyzed 1,751 multicultural families' adolescents who participated in the 2017-2018 Korea Youth Risk Behavior Surveys. Information on dietary and lifestyle factors was self-reported using a web-based questionnaire and this information included breakfast and foods consumption, perceived health status, alcohol drinking, smoking, physical activity, and weight control efforts. Body mass index (BMI) was calculated based on the self-reported height and body weight (kg/㎡). Weight status was assessed according to the 2017 Korean National Growth Chart: underweight (weight-for-age <5^th percentiles), overweight (85^th≤ BMI-for-age <95^th percentiles), and obese (BMI-for-age ≥95^th percentiles). Multiple logistic regression analysis was performed to examine the dietary and lifestyle factors associated with weight status after adjustment for covariates. Results: Among Korean adolescents from multicultural families, the prevalence of overweight/obesity was 20.9%, whereas about 7% of adolescents were underweight. The weight status did not show differences according to gender, school level, area of residence, and household income. Compared to adolescents who did not have breakfast during the previous week, those who had breakfast 3-4 days/week and ≥5 days/week had a 42% (p=0.021) and a 37% (p=0.009) lower prevalence of overweight/obesity, respectively. The adolescents who frequently consumed carbonated soft drinks (≥5 times/week) showed an odds ratio (OR) of 1.69 (95% CI=1.01-2.83) for overweight/obesity relative to those adolescents who did not consume carbonated soft drinks. The OR of being underweight for adolescents who ate fast food ≥3 times/week was 1.97 (95% CI=1.04-3.71) compared to those adolescents who had not eaten fast food during the previous week. Conclusions: Dietary and lifestyle factors were associated with overweight/obesity as well as underweight among Korean adolescents in multicultural families. Our findings could be used to design and provide nutrition interventions for this specific population.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.699-710
• /
• 2009

If a country has her geoid model, it could be determine accurate orthometric height because the geoid model could provide continuous equi-gravity potential surface. And it is possible to improve the coordinates accuracy of national control points through geodetic network adjustment considering geoidal heights. This study aims to find the best way to develop geoid model in Philippines which have similar topographic conditions as like Malaysia and Indonesia in Eastsouth asia. So, in this study, it is surveyed the general theories of geoid determination and development cases of geoid model in Asia and it is computed that the geoidal heights and gravity anomalies by spherical harmonic analysis using EGM2008, the latest earth geopotential model. The results show that first, the development of gravimetric geoid model based on airborne gravimetry is needed and second, about 200 GPS surveying data at national benchmark is needed. It is concluded that it is the most reasonable way to develop the hybrid geoid model through fitting geometric geoid by GPS/leveling data to gravimetric geoid. Also, it is proposed that four band spherical Fast fourier transformation(FFT) method for evaluation of Stokes integration and remove and restore technique using EGM2008 and SRTM for calculation of gravimetric geoid model and least square collocation algorithm for calculation of hybrid geoid model.

• Journal of Bio-Environment Control
• /
• v.6 no.1
• /
• pp.27-33
• /
• 1997

This experiment was carried out to investigate the effects of limited nutrient supply during 21 days before and after pollination stage on the growth, fruit quality and nutrient uptake of muskmelon in rockwool culture. Muskmelon, cv. Earl's Favorite seeds sowed on rockwool cube and transplanted on rockwool slab($90\times15\times7.5cm$) when 2 to 3 true leaf appeared on Sep. 6, 1991. Three kinds of nutrient composition recommended by Shizuoka university, combinated with the composition of Otsuka house A and composition Shizuoka III. One half of calcium nitrate(Ca(NO$_3$)$_2$.4$H_2O$) for limiting nitrogen supply during 21 days was treated and then fertigated the nutrient composition recommended by Shizuoka university up to harvest time. Trickling nozzles(Netafim Co. Israel) were used for fertigation of nutrient solution and noncirculating system was employed. Temperature was maintained $18^{\circ}C$ in night but 23 to $25^{\circ}C$ for 10 days after pollination for softening the fruit. The drainage ratio of nutrient solution was adjusted 20 to 30 percent. Fertigated and drained amount, and the pH and EC of nutrient solution were recorded. The concentrations of mineral elements including N, P, K, Ca, and Mg were analyzed and compared among treatments. In both autumn and winter cultivation, the limitation of nutrient supply by adjustment of nutrient composition(NO$_3$-N : 8meㆍ$\ell^{-1}$) caused the nutrient deficiency in muskmelon plant due to the limited nutrient supply. After pollination nutrient limitation by the lowering the nitrate retarded the over thickening of upper leaves of muskmelon but plant height and fresh weight of fruit were higher in the plot of nonlimited nutrient supply. The phenomena were attributed to the differences of the amount of nutrient uptake due to the limited time of nutrient solution, duration of nutrient supply and concentration of nutrient solution. These results suggested that increasing nutrient supply in the pollination stage was favorable for better appearance of fruit and improving fruit quality. Further trials would be required for the incre-ment of sugar degree of muskmelon grown in rockwool.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.95-104
• /
• 2005

To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_2
• /
• pp.841-850
• /
• 2019

The purpose of this study is to strengthen the capability of rapid mapping for disaster through improving the positioning accuracy of mapping and fusion of multi-sensing point cloud data derived from Unmanned Aerial Vehicles (UAVs) and disaster investigation vehicle. The positioning accuracy was evaluated for two procedures of drone mapping with Agisoft PhotoScan: 1) general geo-referencing by self-calibration, 2) proposed geo-referencing with optimized camera model by using fixed accurate Interior Orientation Parameters (IOPs) derived from indoor camera calibration test and bundle adjustment. The analysis result of positioning accuracy showed that positioning RMS error was improved 2~3 m to 0.11~0.28 m in horizontal and 2.85 m to 0.45 m in vertical accuracy, respectively. In addition, proposed data fusion approach of multi-sensing point cloud with the constraints of the height showed that the point matching error was greatly reduced under about 0.07 m. Accordingly, our proposed data fusion approach will enable us to generate effectively and timelinessly ortho-imagery and high-resolution three dimensional geographic data for national disaster management in the future.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.285-295
• /
• 2018

Purpose: The aim of this study is to develop a three-wheel riding cultivator for improving the performance of the current four-wheel riding cultivators in the market. Methods: A prototype three-wheel riding cultivator with the rated power of 15.5-kW, a primary hydrostatic and a two-speed selective gear transmission shifts, front/rear three-wheel drive, a hydraulic wheel tread adjustment, and the mid-section attachment of the major implements was designed and constructed. Its specifications and basic performance are investigated. Results: The maximum speeds of the prototype at the low and high stages were measured to be approximately 7.31, and 11.29 km/h in forward travel, respectively, and approximately 3.60, and 6.37 km/h in rearward travel, respectively. The minimum ground clearance is shown to be 670 mm. The rotating speeds of the power takeoff (PTO) shaft at the low and high stages are shown to be approximately 795 and 1,140 rpm, respectively. The tread of the rear wheels, the minimum radius of turning, and the maximum lifting height of the parallel link device are measured to be within 1,320-1,720 mm, 2.80 m, and 390 mm, respectively. Approximately 25.3% and 74.7% of the total weight of the prototype are distributed in the front and rear wheels on flat ground, respectively. When the tread of rear wheels increased from 1,320 to 1,720 mm, the left and right static lateral overturning angles increased from $33.4^{\circ}$ to $39.1^{\circ}$ and from $29.0^{\circ}$ to $36.1^{\circ}$, respectively. Conclusions: The prototype three-wheel riding cultivator showed a wide range of travel and PTO speeds, high minimum ground clearance, small minimum radius of turning, and easy control of the rear wheel tread. Further, the easy observation of cultivating operations by mid-mounting the implements can improve quality of work. Therefore, the prototype is expected to contribute to the riding mechanization of cultivating operations for various upland crops in Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.1
• /
• pp.41-46
• /
• 2021

As data acquisition using unmanned aerial vehicles is widely used, as one of the ways to increase the accuracy of photogrammetry using unmanned aerial vehicles, a method of inputting both vertical and oblique images in bundle adjustment of aerial triangulation has been proposed. In this study, in order to find a suitable method for increasing the accuracy of photogrammetry, the accuracy of the case of adjusting the oblique images taken at different shooting angles and the case of adjusting the oblique images with different shooting angles at the same time with the vertical images were compared. As a result of the study, it was found that the error of the checkpoint decreases as the angle of the input oblique images increases. In particular, when the vertical images and oblique images are used together, the height error decreases significantly as the angle of the oblique images increases. The current 『Aerial Photogrammetry Work Regulation』 requires RMSE (Root Mean Square Error), which is the same as GSD (Ground Spatial Distance) of a vertical image. When using an oblique images with a shooting angle of 50°, a result close to this standard is obtained. If the vertical images and the 50° oblique images were adjusted at the same time, the work regulations could be satisfied. Using the results of this study, it is expected that photogrammetry using low-cost cameras mounted on unmanned aerial vehicles will become more active.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.1-11
• /
• 2006

This study conducts a theoretical research on road traffic noise. Also, the domestic road noise forecast models were compared each other and analyzed with advanced countries' models to indicate the application possibility and problems. For the establishment of a general formula, we compared the forecasted value with the actual value applied in the formula proposed by the National Environment Institute, and examined the necessary improvement of the domestic road traffic noise forecast model. Also, a regression model was built to examine the relationship between traffic factors and noise. The traffic volume and speed are the main traffic factors used in this formula to affect the noise. From the results, it was found that the speed had a closer relationship with the noise rather than the traffic volume. Therefore, to decrease road noise, it is more important to control traffic speed. The spatial effect of road traffic noise within the apartment complexes was used in the case study to derive location-specific adjustment values. We surveyed the road traffic noise of three apartment complexes, and found that the road traffic noise within each complex was affected at plane level as well as at three-dimensionally. In other words, as the distance from the sound origin grows farther, noise level decreases. Also, it was found that noise increases as heigt goes up, but drops when the height goes beyond a certain level, and that the effect of noise decreases if there are obstacles along the path of the noise direction. Therefore, apartment site design should be done with consideration of the effects of noise in the future.