• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1095-1096
• /
• 2008

By adding height compensation to the usual 3 points skew adjustment device, an improved functional skew adjustment device is implemented in this paper. The proposed skew adjustment device is for traverse which will be adapted to BD and HD player system requiring more accuracy. and It can adjust not only R/T skew but also height. The system is composed of personal computer, control box, kinematic mechanism device and bar-code reader device. Application programs are implemented by visual basic.

• 반도체디스플레이기술학회지
• /
• 제10권2호
• /
• pp.97-102
• /
• 2011

Lots of 2D vision algorithms have been applied for inspection. However, these 2D vision algorithms have limitation in inspection applications which require 3D information data such as the height of semiconductor chips. Stereo vision is a well known method to measure the distance from the camera to the object to be measured. But it is difficult to apply for inspection directly because of its measurement error. In this paper, we propose two adjustment methods to reduce the error of the measured height data for stereo vision. The weight value based model is used to minimize the mean squared error. The average value based model is used with simple concept to reduce the measured error. The effect of these algorithms has been proved through the experiments which measure the height of semiconductor chips.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.961-962
• /
• 2012

• 대기
• /
• 제31권1호
• /
• pp.101-112
• /
• 2021

The long-term trend of surface wind speed in Korea is examined for 31 KMA weather stations from 1985 to 2019. Most stations, except Daegwallyeong, have several times of anemometer height changes from tens of centimeters to several meters. To minimize such height change effect on long-term wind trend, the present study adjusts anemometer height in each station to the standard height of 10 m using the power-law wind profile. This adjustment results in non-negligible trend change. For instance, the increasing surface wind speed at Suwon station, which has six times of anemometer height changes in a range of 0.8 m to 20 m, is weakened up to 67% and becomes statistically insignificant. Likewise, the decreasing trend at Andong station, with three times of anemometer height changes in a range of 10 m to 15.5 m, is weakened up to 66%. A similar weakening in long-term trend is observed in most stations regardless of positive and negative trends. However, due to the cancellation between weakened negative trends and weakened positive trends, the station-averaged wind speed trend in Korea does not change much. This result suggests that anemometer height adjustment is crucial for evaluating local wind speed trend but its impact on nation-wide wind speed trend is rather minor.

• 한국건축시공학회지
• /
• 제15권6호
• /
• pp.631-639
• /
• 2015

유닛모듈러 공법에서는 정밀 제작된 유닛모듈과 시공정밀도가 낮은 기초부의 접합부에서 수평 정밀도 차이가 발생한다. 이러한 정밀도 차이로 인하여 상부 유닛모듈이 뒤틀리거나, 간격이 벌어지는 등 다양한 문제가 야기될 수 있다. 이러한 배경에서 본 연구는 Pre-Fab 독립기초의 높이조절이 가능한 공법을 개발하는 것을 목적으로 하였다. 이를 위하여 본 연구에서는 볼트와 너트를 이용한 높이조절 공법을 제안하고 시공 상세도와 시공순서를 제시하였다. 그리고 구조 시뮬레이션을 수행하여 구조적 안정성을 확인하였다. 향후 개발된 높이조절 공법의 mock-up 시험, 경제성 분석 등을 실시하여 시공성과 유용성을 검토할 예정이다.

• 문화기술의 융합
• /
• 제9권1호
• /
• pp.525-530
• /
• 2023

2단 행거는 공간 활용도가 높고 설치가 쉬운 장점으로 인해 많은 가정에서 사용되고 있지만 사용 시 높이 조절이 불가능해 사용자가 상단봉에 걸려있는 옷을 내리기에 많은 어려움이 있다. 따라서 본 논문에서는 기존 2단 행거의 기능 및 장점은 유지하면서 사용자가 의류를 손쉽게 걸거나 꺼낼 수 있는 새로운 형태의 2단 행거 형상을 제안한다. 한 번의 동작으로 상단봉이 사용에 편리한 높이까지 내려올 수 있도록 적절한 링크기구를 설계하였으며 높이 조절 시 상/하단 의류가 겹치지 않도록 상/하단봉의 움직임을 입체형으로 구현하였다. 또한 상단봉이 내려올 때 행거가 넘어지지 않으면서 사용 후 고정이 해제되어 원래의 높이로 올라갈 수 있는 적절한 링크 길이와 조인트 위치 및 구속 조건을 선정하였으며 사용자의 안전을 위해 가스 스프링을 추가하여 하강 및 상승 속도를 조절하였다. 높이 조절시 옷의 하중을 지탱할 수 있도록 FEA 해석을 통해 개선 형상에 대한 안정성을 검증하였으며 실제 제작을 통해 입체형 높이 조절 행거의 작동 여부를 확인하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.275-276
• /
• 2002

Active-head sliders with a unimorph piezoelectric actuator for flying height control were experimentally evaluated. It was found that the normalized stroke of the actuator is 5.2 to 6 nm/V/mm without flying over the disk. However, the normalized adjustment range of flying height is about 1.6 nm/V/mm when the active-head slider is flying over the disk. This value is smaller than the measured value when the slider is not flying, because of the air pressure generated at the active pad when the pad approaches the disk surface.

• 한국공작기계학회논문집
• /
• 제16권1호
• /
• pp.92-97
• /
• 2007

This study was carried out to minimize the lifting force and to design the slim sized frame of a height adjustment mechanism. This unit is designed for the display devices in order to enhance the ergonomics for effective height adjustment as well as to achieve much slimmer frame for the pedestal. A tolerance analysis of 6 sigma was applied to achieve smooth lift at design stage not to change the tolerance specification of gap several times in a roller type of lifting mechanism at mass production stage. The specification of minimum gap and the target of production yield ratio were agreed with a quality team before tooling. A DFSS simulation on drawings had been done with reasonable tolerance and achievable standard deviation(${\sigma}$) several times until the target specification of gap and yield ratio was met. Once tolerance and deviation(${\sigma}$) were fixed tooling start was done successfully. A CAE method was applied to achieve a slim design. Design parameters were frozen when those parameters matched the reference strength data of standard model. Through those tolerance analysis and CAE simulation the number of tool modification was reduced and production yield ratio was raised up without arguing quality specification at production stage in the end.

• 한국산업융합학회 논문집
• /
• 제7권1호
• /
• pp.63-68
• /
• 2004

There are a lot of manholes such as for water supply, sewage, telecommunication cable, traffic sign, electricity supply, and rainwater, etc. Conventional manholes installed on a road are impossible to adjust height, so that they should be entirely excavated to reinstall or repair. This entire excavation of a manhole causes too much time-consuming work, waste of resources, and obstruction of traffic. In this study, in order to solve the above mentioned problems, a cover, outer and inner parts of a manhole are integrated by gear-shaped parts located between outer and inner parts of a manhole. Mechanical design is performed to determine dimension of gear-shaped parts by Taguchi orthogonal array table. Cast molds for a gear-shaped manhole are also manufactured.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.287-290
• /
• 2003

Over the last few years computer based image processing has become more prominent in forensic science. The image quality from many CCTV systems is too poor for facial recognition. but there are other human characteristics which allow us to recognize individuals from a distance. one of these parameters is a human's height. In this paper, we propose useful height measurement method by auto Position, size adjustment which uses image superimposition and edge detection regardless of lens distortion and not uses conventional photogrammetry calibration methods.