• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.231-237
• /
• 2010

The moving trajectory of a golf ball is mainly determined by the angles of the clubface and the trajectory of the club shaft. This paper presents a computer program for analyzing the position and angles of the club while the club moves in a circular motion. For this purpose, a mathematical algorithm was developed and implemented on the experimental data(5 m and 10 m carries) using VC++ and OpenGL. A skilled female golfer(174 cm, 65 kg, 0 handicap) was participated in data collection for the short approach shots. An iron club(Titleist 52 degree, 91.5 cm length, 450 g mass), attached with five reflective markers(12 mm), was used to collect experimental data. However, exact 3D coordinates and angles of the clubface are not directly calculated from measured data. A reverse engineering platform(Minolta Vivid910 hardware and Rapidform software) was thus employed to acquire the scanned data of the clubface. The scanned data and measured data were first aligned by applying appropriate coordinate transformations, and then exact coordinates and angles of clubface could be obtained at each position during circular motion. The program(Club Motion Analysis 1.0) exports the open, heel, loft angles of the club.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.187-196
• /
• 2009

The foot type is classified into normal, high or low arch according to either foot print or medial longitudinal arch (MLA) height. Plantar fasciitis, heel pain, Achilles tendinitis, stress fracture, metatarsalgia, knee pain, shin splint pain, and etc are common foot disorders and associate to the foot type. The purpose of this study was to evaluate several suggested bony inclination used to classified the abnormal foot and if the arch index (AI) was correlated with foot morphology. Lateral view and dorso-plantar view of radiographic images and flatbed scanner measurements obtained from 57 college students were analyzed. Results showed that AI measured in this study was higher than Caucasian Americans and European, but similar with African. The ethnic origin could influent the AI distribution. The AI provided a simple quantitative means of assessing the structure of lateral and medial longitudinal arches. The correlation coefficients of true bone height with AI could be further improved by normalized foot width rather than foot length. AI also demonstrated as a good indicator of inclination between calcaneus-fifth metatarsal (CalM5) and calcaneus-first metatarsal (CalX), it is a good means to classify the foot type.

• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.241-246
• /
• 2009

Since inappropriate muscle forces mean that people cannot perform some activities related to roles of the muscle, muscle forces have been considered as an important parameter in clinic. Therefore, many methods have been introduced to estimate muscle forces indirectly. One of the methods is muscle tissue dynamics and it is widely used in commercial softwares including musculoskeletal model, such as SIMM. They, however, need motion data captured from 3-dimensional motion analysis system. In this study, we introduced an algorithm to estimate muscle forces in real-time by using joint angles. The heel-rise movements were performed for a normal with 3-dimensional motion analysis system, EMG measurement system, and electrogoniometers. Joint angles obtained from electrogoniometers and EMG signals were used to estimate muscle forces. Simulation was performed to find muscle forces using motion data which was imported into musculoskeletal software. As the results, muscle lengths and forces from the developed algorithm were similar to those from commercial software in pattern. Results of this study would be helpful to implement a tool to calculate reasonable muscle forces in real-time.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.7
• /
• pp.1173-1183
• /
• 1997

In order to flatter the figures of average middle aged women by determining harmonious proportions for their costume forms, this study evaluates effects of varying design details of jackets(coats) with blouses and slacks using a ranking test and paired comparisons test. The result from clothing design C-2 which has the best design effect were as follows; 1. In order to look taller, the jacket(coats) is divided vertical long line and it has the emphasis point close to the face. 2. In order to make shoulder width look wider, armhole seam line attached 1-2 cm from the shoulder point. 3. In order to make chest width look slimmer, division was made up of a tailored collar with a deep V-neckline. 4. In order to make waist circumference look slimmer, the jacket has more fitted waist line than loosed it and tailored collar with a deep V-neckline. 5. In the case of the division of upper and lower garments, when the division was closer to the golden section, i.e., when the jacket hemline is hipline and slacks length is the heel excluded length of shoe heels, the overall appearance was better. 6. The V-neckline looked better, when it was cut along a long acute angle to the waist line. Because of dividing along above factors 1-6 i.e., clothing design C-2 was overall harmonious. Appropriate division of costume forms made for an aesthetic composition, which flattered the body types of middle aged women and presented harmonious, beautiful costume design effects. It made the women look taller, slim and balanced, and highlighted middle aged women's sense of beauty.

• Journal of the Korean Society of Physical Medicine
• /
• v.12 no.3
• /
• pp.85-91
• /
• 2017

PURPOSE: The purpose of this study was to compare muscle activation of the trunk and lower limbs of subjects wearing high-heeled or flat shoes while crossing over obstacles of different heights. METHODS: Twenty subjects participated in this study. While wearing high-heeled shoes (7 cm) or flat shoes (0 cm), the subjects were asked to cross over obstacles of different heights (10%, 20%, and 30% of their lower-limb length). Muscle activation of the trunk and lower limbs with the supported side while crossing over obstacles of different heights was measured using the electromyogram (Noraxon, DTS, Germany). Two-way repeated ANOVA was used to compare the muscle activation between high-heel shoes and flat shoes while crossing over obstacles of different heights. All statistical analyses were performed using SPSS ver. 21, and p-values less than .05 were used to identify significant differences. RESULTS: As an obstacle's height increased, muscle activation of the trunk and lower limbs with the supported side was increased while wearing either type of shoe, and it was generally higher while wearing high-heeled shoes. However, tibialis anterior muscle activity while wearing high-heeled shoes was lower than while wearing flat shoes. CONCLUSION: This study showed that muscle activation of the trunk and lower limbs was higher when subjects wore high-heeled shoes than when they wore flat shoes while crossing over obstacles of different heights. Therefore, high-heeled shoes can easily cause high muscle fatigue of the trunk and lower limbs, and the TA muscle may weaken in persons who wear high-heeled shoes.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.4
• /
• pp.427-439
• /
• 2014

This study identifies the foot side shapes of elderly men by classifying foot types according to 3D foot shapes and analyzing individual characteristics. The subjects were 284 elderly men over 60 years of age who lived in Gwangju and did not have foot related diseases. They were measured with a scanner (Nexcan$^{(R)}$ of K&I Technology) to obtain three dimensional feet shapes. Anthropometric measuring items consisted of 28 items estimated on the right foot of each subject. 3D scan data were analyzed by various statistical methods such as factor analysis, ANOVA and cluster analysis using the statistical program SPSS 19.0. A total of 7 factors were extracted through a factor analysis and these factors represent 77.56% of total variance. The 8 factors were: inside height and side gradient, ankle thickness, size from foot center to ankle, lateral malleolus height, forefoot height, instep and heel height and gradient. A total of 3 clusters (as foot type) were categorized using 7 factor scores by cluster analysis. Type 1 was classified as high forefoot and low midfoot compared to the length. Type 2 was classified as low forefoot and high midfoot, and type 3 was classified as low forefoot and low midfoot.

• Physical Therapy Korea
• /
• v.27 no.4
• /
• pp.227-232
• /
• 2020

Background: Hallux valgus (HV) is a foot deformity developed by mediolateral deviation of the first metatarsophalangeal joint. Although various foot-toe orthoses were used to correct the HV angle, verification of the effects of kinetics variables such as ground reaction force (GRF) through three-dimensional (3D) gait analysis according to the various type of orthoses for HV is insufficient. Objects: This study aimed to investigate the effect of soft and hard types of foot and toe orthoses to correct HV deformity on the GRF in individuals with HV using 3D motion analysis system during walking. Methods: Twenty-six subjects participated in the experiment. Participants had HV angle of more than 15° in both feet. Two force platforms were used to obtain 3D GRF data for both feet and a 3D motion capture system with six infrared cameras was used to measure exact stance phase point such as heel strike or toe off period. Total walk trials of each participant were 8 to 10, the walkway length was 6 m. Two-way repeated measures ANOVA was used to determine the effects of each orthosis condition on the various GRF values. Results: The late anteroposterior maximal force and a first vertical peak force of the GRF showed that the hard type orthosis condition significantly increased GRF compared to the other orthosis conditions (p < 0.05). Conclusion: There were significant effects in GRF values when wearing the hard type foot orthosis. However, the hard type foot orthosis was uncomfortable to wear during walking. Therefore, it is necessary to develop a new foot-toe orthosis that can compensate for these disadvantages.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.1 s.139
• /
• pp.79-90
• /
• 2005

The purpose of this study is to find out the wearing conditions and cause of discomfort with shoes for male college students which will provide useful information fur the shoes manufacturer. The questionnaire survey was conducted on 346 male college students on purchasing practices, wearing conditions, and overall satisfaction with shoes. The results were as follows: Male college students have a tendency to have longer buying cycles and buy more expensive shoes compare to high school students. The order of criteria considered fer purchasing was shape, price, style coordination with clothing. The order of criteria considered for purchasing differed according to their major, economic status and purchasing place. Most of them have two pairs of white or black sports shoes and one pair of either black or brown dress shoes. The most popular material was man made leather but college students have more leather shoes than high school students. There were differences between high school students and college students in wearing conditions, how many they have, material and color. The varieties of shoes differed by season. They were satisfied with their shoes' design and color but unsatisfied with qualify or the material and durability of the shoes. Due to the pressure of the shoes, they experienced discomfort such as numbness, blisters on the feet and red skin. They experienced discomfort on the soles of the feet. The causes of discomfort were shape, width, hight of the heel, material and length in order. Dress shoes cause more discomfort than sport shoes due to the hardness of material, and flexibility of the sole. Since the material differed by the price, the degree of discomfort significantly differed by price too.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.8
• /
• pp.1322-1331
• /
• 2008

The purpose of this study is to design an official costume of Joseon Ginyeo in the scholar’s banquet in 16th century, thereby making correct historical animation, drama costumes, and various costume contents. Every Ginyeo in and wore a long yellow coat with short front edge. 'Dan-ei', Ginyeo’s court costume, had very similar shape except color and collar, therefore the size of Dan-ei was adapted to design a yellow coat for drama actress. Ginyeo’s Jogori in these paintings was wide and long enough to cover undervelly under the edge of yellow coat, but It was designed more slim and long for better appearence and comfortable movement in my work. A skirt of Ginyeo was designed with circumference of about 360cm and length of about 105cm according as a skirt style of Joseon ladies in 16th century. Ginyeo's Jam(hairpin) was consist of a vase, a plum blossom, and a lotus pattern. And, a wide underpants with a single suspender, portable pouch, Un-hae(women’s shoes) with low heel are needed for drama actress in the role of Ginyeo. In this design, it is very important to save an estimate and time, select suitable mordern fabrics, reform discomportable points, express a charater’s role, and make a trendy appearence.

• Archives of Reconstructive Microsurgery
• /
• v.7 no.1
• /
• pp.20-27
• /
• 1998

Among many kinds of introduced free flaps, scapular freeflap is one of the most popularly using modalities in fasciocutaneous defect coverage with minimal donor defect and easier procedure and constant vascular patterns of the donor. Many surgeons who had experience of this flap pointed out deficit of the reliable sensation of the transplanted flap is the main shortcoming of the scapular free flap. If we can subjugate that point, scapular free flap is the most excellent procedure in such a cases as heel pad reconstruction and hand reconstruction which are relatively important to have skin with protective sensation. Author performed anatomical literature review, 10 cadaveric dissections and 12 clinical dissections. In surgical anatomical aspect, the upper six dorsal rami of the thoracic nerves have medial branches which pierce Longissimus thoracis and Multifidus muscle with small cutaneous twigs which pierce Latissimus dorsi and Trapezius muscle. Among that cutaneous twigs, several twigs distribute to the skin of the back from midline to lateral aspect which territory is identical to scapular free flap. We analysed clinical experiences of that sensory bearing scapular free flap surgical anatomy and one year follow-up studies with several results. 1) Two to three cutaneous twigs which pierced from the Trapezius muscle over the scapular free flap region. 2) Each twigs has two to four nerve fascicles with small artery. 3) The nerve distributed to the ordinary scapular free flap and large enough size and pedicle length to neurorrhapy with various recipient site nerves. 4) The inconvenience of this procedure is the vascular pedicle and nerve pedicle have opposite directions, vascular pedicle of that comes from lateral direction from subscapular vessels, but nerve pedicle comes from medial direction from trapezius muscle. Author can found constant cutaneous nerve branches which come from piercing the Trapezius. This nerves are helpful for protective sensation in transplanted scapular free flap. We can't had enough follow-up and evaluation of the nerve function of this procedure, we need continuous research works to application of this procedure. The in conveniences come from directional differences of pedicle can solve with longer harvest neural pedicle and change direction of the neural pedicle.