• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.416-421
• /
• 2000

We have developed a simple model for describing the non-spherical particle growth phenomena using modified 1-dimensional sectional method. In this model, we solve simultaneously particle volume and surface area conservation sectional equations which consider particles' irregularities. From the correlation between two conserved properties of sections, we can predict the evolution of the aggregates' morphology. We compared this model with a simple monodisperse-assumed model and more rigorous two dimensional sectional model. For the comparison, we simulated silica and titania particle formation and growth in a constant temperature reactor environment. This new model shows a good agreement with the detailed two dimensional sectional model in total number concentration, primary particle size. The present model can also successfully predict particle size distribution and morphology without costing very heavy computation load and memory needed for the analysis of two dimensional aerosol dynamics.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.449-455
• /
• 2009

A reversible axial flow fan called jet fan has been widely used for longitudinal ventilation in road tunnels to secure a safe and comfortable environment cost-effectively. As shifting the flow direction is usually made by only switching the rotational direction of an electric motor due to heavy duty, rotor blades having identical aerodynamic performance for bidirectional flow should be necessary. However, such aerodynamically desirable blades haven't been developed sufficiently, since most of the related studies have been done from the viewpoint of unidirectional flow. In the present paper, we demonstrate a method to profile the blade section suitable for bidirectional flow, which is validated by studying the aerodynamic performances of rotor blades of a two-stage jet fan experimentally and numerically.

• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.2
• /
• pp.50-67
• /
• 2000

The spacecraft simulator is used for command validation, operational check of the Satellite Operation Subsystem (SOS), spacecraft anomaly analysis support, satellite operator training etc. In this paper, S/W design features and modeling characteristics of the KOMPSAT Spacecraft Simulator Subsystem (SIM) are described. Validation procedures and simulation results are also provided. The SIM provides extensive simulation capabilities by including models for most of the spacecraft subsystems. The software structure of the SIM was designed and implemented so as to support operations not only in real-time but also in non real-time by utilizing the Hewlett Packard (HP) UNIX functions. The SIM incorporates as many user-friendly Man Machine Interface (MMI) windows as possible so that all the SIM normal operations can be executed through the MMI windows.

• Journal of the Korean Statistical Society
• /
• v.29 no.2
• /
• pp.201-217
• /
• 2000

The method of generalized estimating equations (GEE) has become very popular for the analysis of longitudinal data. We extend this work to the use of M-estimators; the resultant regression estimates are robust to heavy tailed errors and to outliers. The proposed method does not require correct specification of the dependence structure between observation, and allows for heterogeneity of the error. However, an estimate of the dependence structure may be incorporated, and if it is correct this guarantees a higher efficiency for the regression estimators. A goodness-of-fit test for checking the adequacy of the assumed M-estimation regression model is also provided. Simulation studies are conducted to show the finite-sample performance of the new methods. The proposed methods are applied to a real-life data set.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.258-261
• /
• 2000

Geophysical surveys (electrical resistivity, self-potential, and magnetic methods) and streamwater sample analysis have been carried out at a site of tailings of waste deposits in an abandoned mine, Jangpoong, which is situated in Kowesan-Gun, Chungbuk-Do. The research was aimed at investigating the suitability of the various geophysical methods for detection of AMD (acid mine drainage) paths, and ultimately mapping of preferred AMD flow channels by incorporating the water sample analysis. Electrical resistivity section from the dipole-dipole line represents the low-resistivity zone trending northwest toward the stream nearby. The positions of the resistivity anomalies for AMD channels are well correlated to the ones from the various geophysical surveys. In addition they correspond to the sites of the higher peaks for the pH, EC, heavy metal content for the water sample data.

• Nuclear Engineering and Technology
• /
• v.43 no.1
• /
• pp.75-82
• /
• 2011

The neutron multiplication factor in spent fuel storage racks, in which a stainless steel plate encloses a fuel assembly, was evaluated according to the variation of distance between the fuel assembly and stainless steel plate, as well as the pitch. The stainless steel plate position with the lowest multiplication factor on each pitch consistently appeared as 6mm or 9mm away from the outmost surface of the fuel assembly. Because the stainless steel plate has a thermal neutron absorption cross section, its ability to absorb neutrons can work best only if it is installed at the position where thermal neutrons can be gathered most easily. Therefore, the stainless steel plate position should not be too close or too far away from the fuel assembly, but it should be kept a pertinent distance from the fuel assembly.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.1-8
• /
• 2010

P-PIE program is developed for evaluating failure probability of pipes in nuclear power plants based on the existing PRAISE program. In the program, crack growth due to fatigue loading and stress corrosion can be considered and the probability of fracture or leakage of pipes can be calculated. Crack growth simulation is performed based on stress intensity factor and a damage parameter and failure of a pipe is determined based on J integral or net section yielding. Using the developed program the failure probabilities of tubes in a domestic nuclear power is obtained and discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.575-578
• /
• 2002

In this paper, we discuss carrier trapping model and trap characteristics of nitrided oxide thin film. Based on the experimental results, the carrier trapping model for system having multi-traps is proposed and is fitted with experimental data in order to determine trap parameter of nitride oxide and O2 annealed nitrided oxide. As a results of curve fitting, the heavy nitridation of oxide introduces three kinds of traps with capture cross section $\sigma$n1=1.48$\times$10$^{-17}$ $\textrm{cm}^2$, $\sigma$n2=1.51$\times$10$^{-19}$ $\textrm{cm}^2$, $\sigma$p=1.53$\times$10$^{-18}$ $\textrm{cm}^2$ and corresponding trap densities Nnl=2.66$\times$10$^{12}$ Cm$^{-2}$ , Nn2=1.32$\times$10$^{12}$ Cm$^{-2}$ , Np=8.35$\times$10$^{12}$ Cm$^{-2}$ .

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2753-2755
• /
• 2003

Overhead crane must do to control occurrence of Anti-Sway according to work situation that is used in case move industry spot's heavy freight, and do safe transfer of freight. Transfer process that make use of crane suspends and consist of series action that put down freight to do relevant addition decreasing the speed before objective while move by schedule section equal speed because increasing the speed after lift thing. This need skill degree by experience because there are operator's function and affinity. Also, must control this effectively because can affect big productivity elevation according to effect that get in transfer of safe freight, Therefore, illuminate physical characteristic of crane and algorithm of motor drive department and there is purpose of this research to do so that correct control may be available through over head crane's shaking control and position control designing LQ controller.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1626-1627
• /
• 2007

This paper deals with the design and manufacturing of power cabinet for reactor power control system(PCS). The PCS provides the control signals and motive power to operate the CEDMs(Control Element Drive Mechanism). The CEDM is raise and lower the CEAs(Control Element Assemblies) in the reactor core. The CEAs are constructed with the Boron-10 isotope which has a high microscopic cross section of absorption for thermal neutrons. This characteristic causes the addition of negative reactivity when a CEA is inserted and positive reactivity when it is withdrawn from the reactor core.