• Journal of Soil and Groundwater Environment
• /
• v.15 no.5
• /
• pp.16-22
• /
• 2010

Heavy metals in soils exist in various forms dependent upon surrounding conditions. As the Janghang smelter area is of concern for its high elevated heavy metal concentrations, Korean government decided to remediate the area. Main objectives of this research were; to analyze heavy metal concentrations and their existing forms in the vicinity of the smelter; and to understand differences made by analysis techniques of heavy metals. Top soils of rice field, crop field, bare field, and forestry in the area were sampled and analyzed for their physicochemical characteristics. Concentrations of Cu, Cd, Pb, and As were analyzed with two pretreatment techniques adopted using 0.1 N HCl and aqua regia. To analyze existing forms of heavy metals, Tessier's schemes for sequential extraction technique were adopted. Exchangeable fraction and carbonate bound fraction of heavy metals may pose potential threat to environment and were in the order of Pb > As > Cu > Cd. If assessing mobile fraction of heavy metals by land uses, the order was forestry > bare land > crop field > rice field. When analyzed using Tessier's scheme, high ratio of residual fractions to total arsenic concentration should be considered for remediation design of the area.

• YAKHAK HOEJI
• /
• v.57 no.1
• /
• pp.8-17
• /
• 2013

The objective of this study is investigation of contamination levels and transfer rate of heavy metals and assessment of health risk effects in animal medicines. A total of sixteen items with 148 samples were obtained for this investigation from major herbal medicine producing areas and herbal markets from 2011 to 2012. Inductively coupled plasma mass spectrometer method was conducted for the quantitative analysis of Pb, Cd and As. In addition, the mercury analyzer system was conducted for that of Hg without sample digestion. The average contents of heavy metals in animal medicines were as follows : 1.55 mg/kg for Pb, 0.28 mg/kg for Cd, 0.70 mg/kg for As and 0.047 mg/kg for Hg respectively. The average contents of heavy metals in decoctions were as follows : 0.03 mg/kg for Pb, 0.01 mg/kg for Cd, 0.17 mg/kg for As and 0.003 mg/kg for Hg respectively. The average transfer rates of heavy metals from animal medicines to decoctions were 1.9% for Pb, 3.6% for Cd, 24.2% for As and 6.0% for Hg respectively. Cancer risks of animal medicines and decoctions through slope factor by ministry of environment republic korea and environmental protection agency was $1.36{\times}10^{-6}$ and $2.50{\times}10^{-8}$ for Pb and $7.46{\times}10^{-5}$ and $1.98{\times}10^{-5}$ for As (assuming that the total arsenic content was equal to the inorganic arsenic) respectively. The hazard index of heavy metals in animal medicines and decoctions was below recommended hazard index as 0.52 and 0.05 respectively. Taken together, cancer risks about Pb and hazard indexes of animal medicines and decoctions indicate that the majority of samples except for some samples with relative high contents of heavy metals were safe. But cancer risks about As of animal medicines indicate that the majority of samples were not relatively safe.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.5
• /
• pp.90-96
• /
• 2011

Simultaneous removal of heavy metals (Cd, Pb) and diesel-fuel from a soil column was evaluated by respectively flushing with sodium dodecyl sulfate (SDS) solution, mixture of SDS and sodium iodide (SDS + NaI), and surfactant foam (SDS + NaI foam). First, this study evaluated these flushing methods to the heavy metals only-contaminated soil for removal of heavy metals from the heavy-metal only contaminated soil column. After 7 pore volume flushing of the soil column, Cd removal efficiencies from the soil were 40% by SDS solution, 50% by SDS + NaI mixture, and 60% by surfactant foam. The flushing results implied that anionic surfactant and ligand can be efficiently applied to extraction of Cd from the heavy metal contaminated soil. Furthermore, surfactant foam flushing showed an increased flushing efficiency with enhancing the contact between surfactant solution and soil. However, Pb removal efficiency by these flushing methods did not show any difference unlike those of Cd. Second, this study eventually evaluated flushing methods for simultaneous removal of heavy metals and diesel-fuel from the soil column with 7 pore volume flushing. Diesel-fuel removal efficiencies were 50% by SDS + NaI flushing and 90% by SDS + NaI foam flushing. Cd removal efficiency by the foam flushing reached to 80% which was higher than the result of the previous heavy metals onlycontaminated soil experiment. This result implied that diesel-fuel could act as a metal-solvent while it contacted to heavy metals present in the soil. This study clearly showed that surfactant foam flushing simultaneously removed heavy metals and diesel fuel from the soil column.

• Journal of Environmental Science International
• /
• v.12 no.4
• /
• pp.497-501
• /
• 2003

The new tridentate ligands of nitrogen donor atoms N,N-Bis(2-amino-ethyI)-benzyl-amine 2HCI(BABEA. 2HCI) and 2,6-Bis(amino-methyl)-pyridien. 2HCI(BAMP. 2HCI) were synthesized as their dihydrochloride salts and characterized by TA, IR. Mass and NMR spectroscopy. The protonation constants of the ligands and stability constants for Cd$^{2+}$, Pb$^{2+}$, Zn$^{2+}$and Cu$^{2+}$ ions were determined by potentiometric titration in aqueous solutions and compared with those of analogous ligands. The effect stability constants of ligands and metal ions for removal of heavy metals in aqueous solution were described.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.491-495
• /
• 2014

Phytoremediation is a technology using plants and associated soil microbes to reduce the concentrations or toxic effects of contaminants in the environments. It is regarded as a cost-effective, efficient, eco-friendly, and solar-driven technology with good public acceptance. This study was conducted to find the plants accumulating heavy metals in soils contaminated with Cd and Pb. Experimental plots (plot size: $0.81m^2$) was artificially contaminated using a contaminated soil collected from a field in vicinity of Wondong mine (WD). Sunflower, corn and castor were tested for their potential to remove heavy metals from the contaminated soils. The results indicated that sunflower was most effective in accumulating heavy metals and thus remedying the soils among the three crops. Dry weight and heavy metal uptake of sunflower shoot differed with growth period. For example, the Cd content of shoots including leaf and stem were 0.31mg, 2.23 mg, and 0.96 mg per plot at 4, 8 and 12 weeks after planting in Cd4-WD treatment; in addition, the dry weight of the shoots in Cd8-WD treatment was reduced due to heavy metal toxicity. This experiment showed that sunflower absorbed Cd, Pb and Zn in their shoots up to 8 weeks of planting; thereafter heavy metals uptake was diminished. This implies that the efficiency of these plants in cleaning the contaminated soils may be high at the early stage of plant growth.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.5
• /
• pp.31-41
• /
• 2011

The objectives of this study were to investigate the efficiencies of the stabilizers such as mono-potassium phosphate (MKP), phosphate fertilizer and red mud in treating the mine tailings contaminated with heavy metals and to characterize the changes in fractionations of the heavy metals during the stabilization. The TCLP results showed that the stabilization efficiencies of Cd, Pb and Zn increased with the increase in the stabilizer dosage and the reaction times. MKP showed the highest efficiencies for the heavy metals stabilization among the stabilizers tested. When the mine tailings were amended with MKP, the TCLP concentrations of Cd, Pb and Zn were reduced by 79~97%, 61~84%, and 89~99%, respectively. When the composite stabilizers, MKP/phosphate fertilizer or MKP/red mud, were used, the stabilization efficiencies were lower than when MKP was used as a single stabilizer. The sequential extraction results showed that carbonates fraction of Cd and Zn increased generally. Especially, when red mud was used, carbonates fraction of Cd and Zn increased 5 and 18 times, respectively. In the case of Pb, the treatment with MKP increased residual fraction by 10 times. The results showed that MKP was the most effective in stabilizing the heavy metals (Cd, Pb and Zn) to improve the efficacy of the composite binders.

• Analytical Science and Technology
• /
• v.15 no.2
• /
• pp.163-171
• /
• 2002

The adsorption characteristics of Cd(II) and Pb(II) ions has been studied by using chitin as an adsorbent. The pure chitin was obtained from the extraction of red-crab shell dumped by fish factory. Adsorption kinetics of Cd(II) and Pb(II) ions on the chitin reached at the maximum adsorption within two minutes. Adsorbed amounts of heavy metals were pH 7.0>10.5>3.5 in the following order. Adsorption ratio by chitin was 21${\sim}$99% for Cd(II) ion and 24${\sim}$95% for Pb(II) ion. Recovery ratio of Cd(II) ion on the chitin was 22${\sim}$53%, and that of Pb(II) ion was 22${\sim}$73%. The adsorption behavior of these heavy metals was explained well by Freundlich adsorption isotherm.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.5
• /
• pp.521-527
• /
• 1998

Removabilities of heavy metals(Cd and Pb) by the tea materials (barley-tea, corn-tea, jasmin-tea, brown rice-green tea, black-tea, cassia tora-tea, persimmon peel-tea, and rice-tea) in the tea-water were studied in the various conditions ; particle size of tea (20, 40, 70 mesh), concentration of heavy metal (25, 50, 100 ppm) and extraction temperature(20, 30, 50, 100$^{\circ}C$). The removabilities by the tea solids were increased as the particle size decreased, concentration of heavy metal increased, and extracting temperature increased. Of the nine kinds of tea, Cd and Pb removability by jasmin-tea was highest. In addition, heavy metal removability by cassia tora tea was better than that of other tea as extraction temperature was increased.

• YAKHAK HOEJI
• /
• v.43 no.5
• /
• pp.577-583
• /
• 1999

Concentrations of heavy metals, including As, Cd, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Se, Si, Sn, V and Zn in the internal organs (liver, kidney, heart, lung, spleen, cerebrum and bone) of Korean obtained from 91 forensic medical autopsy cadavers, with an age range of 12-87 years, were determined by inductively coupled plasma atomic emission spectrometry. From the results, positive correlation with age was observed in the following cases : Cd in liver, kidney and cerebrum; Fe in cerebrum and bone; Pb in bone; v in lung. Copper in heart, Hg in bone and Mn in kidney correlated negatively with age. A significantly positive correlation between Se and Hg was only observed in heart. Significant correlation coefficients between Se and As were observed in liver, kidney, heart spleen and bone. The correlation between Cd and Zn was significant in liver and kidney, indicating that the distribution of Cd is similar to that of Zn in the liver and kidney.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.1
• /
• pp.79-86
• /
• 2016

BACKGROUND: This study was initiated to quantitatively evaluate the effects of five heavy metals on the growth and P removal efficiencies of Alcaligenes sp., known as the Phosphorus Accumulating Organisms (PAOs). It was cultivated in the batch system with five heavy metals, such as Cd, Cu, Zn, Pb and Ni, added in single and binary mixtures, respectively.METHODS AND RESULTS: IC₅₀ (half of inhibition concentration of bacterial growth) and EC₅₀ (half of effective concentration of phosphorus removal Efficiencies) were used to quantitatively evaluate the effects of heavy metals on the growth and phosphorus removal Efficiencies of Alcaligenes sp. In addition, Additive Index Value (A.I.V.) method was used to evaluate the interactive effects between Alcaligenes sp. and heavy metals. As a result, as the five heavy metals were singly added to Alcaligenes sp., the greatest inhibitory effects on the growth and P removal efficiencies of each bacteria was observed in the cadmium (Cd). In the binary mixture treatments of heavy metals, the treatments of lowest IC₅₀ and EC₅₀ were the Cd + Cu treatment. Based on the IC₅₀ and EC₅₀ of the binary mixtures of heavy metals treatments, most interactive effects between the heavy metals were found to be antagonistic.CONCLUSION: Based on the results obtained from this study, it appears that they could provide the basic information about the toxic effects of the respective treatments of single and binary mixtures of heavy metals on the growth and P removal efficiencies of Alcaligenes sp. through further study about the characterization of functional proteins involved in toxic effects of heavy metals.