• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.711-713
• /
• 2000

Recently, the insulation breakdown accident happened at 6.6kV inverter driving motor brings out the reliability decrease to the motor driving system. We need to find the solution with system engineering level. The objectives of this study are developing the appropriate filter for the drive to protect the motor and the insulation system of motor which is driven by inverter. The circuit parameters of cable are calculated by EMTP(Electromagnetic Transient Program) to simulate the system. And we use MATLAB to find the appropriate filter parameter. The simulation and the test results are compared to verify the suitability of the filter parameter. We clarify the cause of the deterioration of the inverter driving motor through the analysis of insulation breakdown accidents. The endurance test scheme and the configuration method of insulation system are established.

• Journal of Electrical Engineering and Technology
• /
• 제7권6호
• /
• pp.898-904
• /
• 2012

This paper presents a ride-through skill of PMSG wind turbine system under the distorted and unbalanced grid voltage dips. When voltage dips occur in the grid, pitch control and generator speed control as well as a parallel resistor of DC-link help to keep the turbine's safety. Modern grid code requires a wind turbine to supply reactive currents to help voltage recovery after grid faults clearance. In order to supply reactive currents to the grid in case of the distortedly unbalanced grid voltage dips, a special PLL is needed to control the grid side converter and to regulate the grid voltages symmetrically. The proposed method is applied to 2MW multi-pole PMSG wind turbine system, and verified by simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.459-463
• /
• 2001

Since recent inverters are formed IGBT VVVF inverter its switching speed has been increased relative to the conventional inverters and the motor design based on the switching surge voltage at the inverter output is very important factor. Therefore, motor and inverter should be designed to have the optimal characteristics by considering the mutually limited conditions. On this research the design technology characteristics for inverter driving traction moor is compared to the products in Korea and the analysis is performed. Thus, it is intend to re-estimate the technology level and introduce the products by HHI, which is driving on Seoul subway line 6 since December, 2000.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.611-619
• /
• 2008

In most shipyards Floating Dock-gate System is adapted for dry docks. For the safe launching of ships in dry docks, smooth operation of dock-gate must be guaranteed. So it is very important to grasp its behavior in waves for securing the high productivity and the safety of workers. Its seakeeping ability was estimated numerically at the floating conditions and the free roll decay and the seakeeping model tests of dock-gate was carried out with bilge-keels of 3 different widths which have a scale of 1 to 20. More than 20% decrease of roll motion was observed in irregular beam seas by applying a bilge-keel system to the dock-gate that is long and narrow.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.355-360
• /
• 2018

The product developed in this study is a ceramic catalyst filter for 1 ton heavy-oil boiler that can simultaneously process dust and nitrogen oxides. This has been developed for simultaneous processing of nitrogen oxides and dust at high efficiency of hot exhaust gas (approximately $300^{\circ}C$) generated after burning 1 ton heavy oil boiler. Ceramic catalytic filters for 1 tonne heavy-duty glass display are technologies that remove 90% of dust and 85% or more of nitrogen oxides. This is an improved new technology to integrate exhaust ventilation and desiccation devices into one, thereby reducing the production process and improving the economy. To this end, the performance test of the catalytic filter for heavy oil boilers was carried out, and the durability of the PLC circuit was constructed.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.237-242
• /
• 2003

The influence of wave forces on the moored ship beside quay was investigated based on in-house ship mooring analysis and ship motion program in this paper. The wind and current are the general environmental factors for the mooring analysis beside quay in the mild weather. However, the weather is becoming rough, the wave phenomenon should be included in the mooring analysis. In this paper, as preliminary stages, each moored rope tension was evaluated based on wind and current environmental condition. The results were compared with those from MOSES, commercial program. In addition to this, wave forces of the ship were calculated in order to solve moored ship motion of equation. We will leave to solve this motion equation as future work.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.179-184
• /
• 2002

For the development of the practical design and analysis scheme of a bridge connecting to the typical VLFS, relevant design criteria and theory and techniques are studied and numerical analysis for the verification of the structural safety of the bridge are carried out. For the design of a typical steel bridge, characteristics of proper type bridge are reviewed and the requirements fur the bridge of this kind are studied as well as the environmental loads. By using the design spiral technique, several alternatives are investigated and an efficient type of a bridge is initially designed. Structural idealization is performed to make overall structural analysis first, and the structural behaviors of the proposed bridge in the given loading condition are evaluated. Through this study a bridge is finally proposed and it is found that this one works well for the connecting function of the bridge.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.216-222
• /
• 2004

The caster roll shells have the good thermal conductivity and the low thermal expansion and have to exhibit high enough strength and good ductility at temperature up to $600^{\circ}C$. Thermal stress in particular is very high due to the contact with the liquid aluminium. The main stresses are of thermal origin, which bring a plastic fatigue on surface. This paper will represent one survey about the investigation of the failure of roll shells for continuous casters and an analysis using the simulation of the temperature distribution and the state of stress during hot rolling. Moreover, there will be a discussion on the roll shell of Mod. HAR 5 which is developed by heat treatment process. Mod. HAR 5 has advantages of high strength, high toughness and increased thermal stress resistance while maintaining the same productivity as the conventional roll.

• 한국안전학회지
• /
• 제31권6호
• /
• pp.67-73
• /
• 2016

According to industrial accident analysis of the Ministry of Employment and Labor in 2013, 38 workers were injured by fall accidents on average per day, and one worker died on average per day among them. In various industries such as heavy and construction industry, the full body harness is commonly used to prevent the fall accident. In developing full body harness, the designer considered only the workers' safety, without taking into account comfort and workability. The survey was conducted so as to search the problems of full body harness currently used by workers in heavy and construction industry. The survey questionnaire was given to 565 workers wearing full body harness in heavy and construction industry. The results of study showed that the development of new full body harness considering body size of korean was needed. The impotent factors for developing of new full body harness were the size and the weight of the full body harness. The full body harness taking into account body size was judged to contribute to more comfortable work, work efficiency and safety. The result of this study can be utilized as useful data in the development of new full body harness considering the body size of korean workers.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.212-219
• /
• 2005

Real sea waves in a towing wave basin have been generated using random periodic motion of the segmented wave makers and the wave reflections of sidewalls. Theoretically, the real sea waves can be described by the superposition of many random oblique waves. This paper introduces numerical real sea wave generation in a rectangular wave basin using spectral method that uses a superposition of orthogonal functions which have to satisfy the Laplace equation. Oblique regular waves, long crested irregular waves and real sea waves were simulated and met the requirement of sidewall wave reflection and wave absorption. MLM (Maximum Likelihood Method) and Spatial Fourier Transform were used in order to obtain propagated wave direction characteristics. The estimated results proved the usefulness of the method and the performances showed reasonable directional patterns comparing with generating patterns.