• The Korean Journal of Ecology
• /
• v.26 no.1
• /
• pp.5-12
• /
• 2003

Seed germination rate and seedling growth were measured on 6 different species(Phytolacca americana, Eupatorium rugosum, Rumex acetocella, Echinochloa crusgalli, Cassia mimosoides var. nomame, Setaria viridis) treated with leaf extract of E. rugosum. Total phenolic compound and heavy metal were analyzed on leaf and soil with and without E. rugosum. The growth of P. americana seedlings were stimulated by 10% and 25% of E. rugosum water extract treatment. The content of total phenolic compounds in soil was lower than that of leaf extract, and 25% was confirmed as threshold concentration in natural systems because the total phenolic compounds were not significantly different between the control soils and the soil treated with 10%, and 25% extract. Total phenolic compound concentrations of the leaf extracts were highest (1.66 mg/l) with E. rugosum grown under the Quercus forest canopy and lowest (1.09 mg/l) for the plant grown in the mixed forest edge. Leaf extracts of plants selected in different sampling sites (Forest interior, Forest edge, under Pinus Canopy and Quercus Canopy) were significant, while soil extracts were not. Seed germination of R. acetocella and S. viridis were significantly inhibited at over 50% concentrations of E. rugosum, but C. mimosoides var. nomame was not affected at any concentration. The radicle and shoot growth of the native species group were reduced two times more than those of the exotic species group by the treatment of extracts. Especially, the seed germination percentage and dry weight of E. rugosum were greater than those of the control group by treatments with extracts of 10% and 25%. Analysis of aqueous extracts from E. rugosum by HPLC identified 6 phenolic compounds: caffeic acid (460.9 mg/l), benzoic acid (109.7 mg/l), protocatechuic acid (7.3 mg/l), ρ-hydroquinone (6.0 mg/l), cinnamic acid (2.7 mg/l) and hydroquinone (0.23 mg/l). The seed germination of P. americana was also inhibited dramatically by protocatechuic acid and cinnamic acid even though the content of caffeic acid (460.9 mg/l) was the highest among analyzed phenolic compounds. The heavy metal content of soil without A. altissima was higher than that of soil with E. rugosum. Particularly, Al, Fe and Mn was considerably high and most of the heavy metal were accumulated in leaves where a high level of total phenolic compounds was found.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.2
• /
• pp.113-132
• /
• 2003

In May 2001, the Stockholm Convention on Persistent Organic Pollutants (POPs) for phasing out and eliminating POPs was signed by 90 countries at the Diplomatic Meeting in Stockholm. In 1998, three years before the Convention, the protocols on POPs and heavy metals were adopted by the United Nations Economic Commission for Europe under the Convention on Long-Range Transboundary Air Pollution. Growing attention on POPs and heavy metals during the past 10 years is primarily due to their toxicity in minute quantities. POPs and some metal compounds are even more toxic because of their bioaccumulation potentials associated with a high lipid solubility. Furthermore, owing to their persistence and semi - volatility, they are widely distributed in the environment, traveling great distances on wind and water currents. Recent international cooperation to address POPs and heavy metals has focused on these issues. Long -range transport of those pollutants are particularly concerned since Korea is located downwind of prevailing westerlies from China. In this paper, a review is provided to assess the properties, sources, emissions, and atmospheric concentrations on POPs and heavy metals.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.93-102
• /
• 2023

This study investigated the possibility of treating heavy metal pollutants existing in the air in addition to simultaneously removing NOx and SOx by injecting oxidizing and reducing agents into a scrubber into a microbubble device to create an eco-friendly method that does not generate secondary pollutants. Lead compound (Pb) was selected as the heavy metal substance in the air to be treated with microbubbles, and the removal efficiency was confirmed. By treating microbubbles by connecting them to a scrubber, it was confirmed that not only NOx and SOx but also heavy metal substances in the air were reduced, cost was reduced, and secondary environmental pollutants were not generated. Through this study, it was possible to simultaneously remove NOx, SOx, and heavy metals at low cost by applying an eco-friendly method, rather than the existing high-cost treatment method such as SCR. If oxidizing agent, reducing agent, and microbubbles are used appropriately, economical and efficient air pollution can be achieved. Since material processing was possible, it is expected to be helpful in the technological development of environmental prevention facilities.

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.3
• /
• pp.25-34
• /
• 1996

We have synthesized the water-insoluble chitosan derivative, N-dithiocarboxy chitosan sodium salt, through the reaction of chitosan with carbon disulfide in the presence of alkali metal hydroxide, Chitosan itself has been prepared using chitin, one of the most abundant compounds in nature, as a starting material. To elucidate this natural polymer the capacity of adsorbing heavy metal ions, we have performed adsorption experiments using chitosan derivatives of various average molecular weights with different contents of sulfur. The effect of pH, adsorption time and temperature on adsorption efficiency was also studied. The adsorbent derived from chitosan of average molecular weight ranging $5,700{\sim}20,000$ was shown to have the highest capacity of adsorbing heavy metal ions. Adsorbing efficiency was increased as the reaction time was increased and as the reaction temperature range of $25{\sim}45^{\circ}C$. The adsorption capacity at various pH, however, appeared to vary depending on the heavy metal ions studied.

• Korean Journal of Pharmacognosy
• /
• v.44 no.2
• /
• pp.200-208
• /
• 2013

The aim of this study was to evaluate the shelf-life of Bojungikgi-tang (Buzhongyiqi-tang in Chinese) by long-term storage test. Experiments were performed to evaluate the stability such as the selected physicochemical, pH, identification, heavy metal, microbiological experiment, and amount of marker compounds under a long-term storage test of Bojungikgi-tang decoction. The significant change was not showed in pH, heavy metal, microbiological, and identification test based on long-term storage test. Furthermore, the HPLC analysis was performed for the determinations of liquiritin, glycyrrhizin, nodakenin, and hesperidin in Bojungikgi-tang by long-term storage test. We were calculated shelf-life of Bojungikgi-tang decoction based on the amount change of four constituents. Consequently, Shelf-life by four compounds at room temperature was predicted 23 month. The suggested shelf-life would be helpful on the storage and distribution of herbal medicine.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.447-457
• /
• 2003

In order to understand the distribution of changes of geochemical characteristics in surface sediments according to various environmental changes around the artificial Lake Shihwa, surface sediments were sampled at $13{\sim}15$ sites form 1997 to 1999 and analyzed by C/S analyzer, ICP/MS and AAS. The average $S/C_{org}$ ratio was 0.35 in the surface sediments, which is similar to 0.36, the characteristic ratio of marine sediments. Heavy metal contents and enrichment factors in the surface sediments tended to be decreasing from the head to the mouth of the Lake Shihwa. With the deposition of fine-grained sediments in the central part of lake, anoxic water column induced the sulfides compounds with Cu, Cd and Zn. Metals such as Al, Fe, Cr, Co, Ni, Cu, Zn and Cd except for Mn and Pb showed relatively high correlation coefficients among them. The contents of Cr, Co, Ni, Cu, Zn and Cd in the surface sediments of the lake were two to five times higher than those in the lake before dike construction and also in outer part of the dike. These are mainly due to the Input of untreated industrial and municipal waste-waters into the lake, and the accumulation of heavy metals by limitation of physical mixing. Although metal contents of the surface sediments at the sites near the water-gate due to outer seawater inflow tended to be lower than those during the desalination, heavy metals were deposited in areas around the new industrial complex in the evidence of spatial distribution of heavy metals in the sediments. This is mainly due to the input of untreated waste-waters from tributaries.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.515-517
• /
• 2003

In order to assess the risk of adverse health effects on human exposure to arsenic and heavy metals influenced by past mining activities, environmental geochemical surveys were undertaken in the abandoned metal mine areas (Dongil Au-Ag-Cu-Zn, Okdong Cu-Pb-Zn, Songcheon Au-Ag, Dongjung Au-Ag-Pb-Zn, Dokok Au-Ag-Cu and Hwacheon Au-Ag-Pb-Zn mines). Arsenic and other heavy metals were highly elevated in the tailings from the Dongil, the Songcheon and the Dongjung mines. High concentrations of heavy metals except As were also found in tailings from the Okdong, the Dokok and the Hwacheon mines. These significant concentrations can impact on soils and waters around the tailing dumps. Risk compounds deriving from mine sites either constitute a toxic risk or a carcinogenic risk. The hazard index (H.I.) of As in the Dongil, the Okdong, the Songcheon and the Hwacheon mine areas was higher value more than 1.0. In the Okdong and the Songcheon mine areas, H.I. value of Cd exceeded 1.0. These values of As and Cd were the highest in the Songcheon mine area. Therefore, toxic risks for As and Cd exist via exposure (ingestion) of contaminated soil, groundwater and rice grain in these mine areas. The cancer risk for As in stream or ground water used for drinking water from the Songcheon, the Dongil, the Okdong, the Dongjung and the Hwacheon mine areas was 3E-3, 8E-4, 7E-4, 2E-4 and 1E-4, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.1
• /
• pp.53-57
• /
• 2009

Recovery of heavy-metallic component from a waste solution of factory was undertaken by the solar cell electricity. The solution was obtained from an electrolytic etching process of 316L stainless steel. The electrolysis of the solution for recovery of heavy metallic components was made with platinum plated titanium mesh anode and copper plate cathode. Analysis for the solution and electro-winned materials were made by EDS, XRD and SEM. Iron, chromium, and sulfur components were recovered on the cathode from the solution. Result of EDS analysis for the electro-winned materials revealed that some metal oxide were contained in the recovered material. The recovered materials were expected to have metallic form only by the electrolysis, but metal compounds were contained because of weak solar cell power. Nickel and manganese component in the solution doesn't recovered by this electrolysis process, but they made a sludge with phosphoric acid in the solution.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.3
• /
• pp.373-377
• /
• 2003

Various groups of industrial and agricultural pollutants (heavy metal ions, cyanides, and pesticides) can be detected by enzymes. Since heavy metal ions inhibit urease, cyanides inhibit peroxidase, organophosphorus and carbamate pesticides inhibit butyrylcholinesterase, these enzymes were co-immobilized into a bovine serum albumin gel on the surface of an ion-sensitive field effect transistor to create a bioprobe that is sensitive to the compounds mentioned above. The sensitivity of the present sensor towards KCN corresponded to $1\;\mu\textrm{M}$ with 1 min of incubation time. The detection limits for Hg(II) ions and the pesticide carbofuran were 0.1 and $0.5\;\mu\textrm{M}$, respectively, when a 10 min sensor incubation time in contaminated samples was chosen. The total time for determining the concentrations of all species mentioned did not exceed 20 min.

• Journal of Energy Engineering
• /
• v.13 no.1
• /
• pp.82-91
• /
• 2004

In order to utilize inorganic components in coal and wastewater sludge as an environmentally stable material, slag-forming is considered as one of the suitable methods better than producing as an ash. Coal slag that was produced by gasification as well as the slag made from wastewater sludge by incineration or melting process have been analyzed with the viewpoint of recyclability. Slags produced by water quenching exhibited a cracked shape that has a size of few millimeters with sharp edges. Slags contain the unburned carbon content below 0.15％ and expose mostly amorphous structural characteristics. Analysis results in the extraction of heavy metal compounds demonstrate that both slags from coal and wastewater sludge could be utilized as a safe recycle material even with a Japanese environmental regulation that is ten times more stringent than the current Korean standard. Slags from coal and wastewater sludge show significant differences in contents of each heavy metal compound. Since the future trend of environmental regulation shifts to the control of total content for each heavy metal compound, proper mixing of slags that contain different heavy metal contents might be an option for manufacturing recycle materials.