• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.310-316
• /
• 2010

Recently a fuel oil of the diesel engine of the marine ship is being changed with heavy oil of low quality as the oil price is higher more and more. Therefore the wear and corrosion in all parts of the engine such as cylinder liner, piston crown, spindle and seat ring of exhaust valves are predominantly increased. In particular the degree of wear and corrosion of piston crown is more seriously compared to the other parts of the engine due to operating in severe environment such as the high temperature of exhaust gas and repeating impact. Thus the repair weldment of the piston crown is a unique method to prolong the its life in a economical point of view. In this case, filler metals having a high corrosion and wear resistance such as stellite 6, Inconel 625 and Inconel 718 are mainly being used for repair welding. However it has been often happened that piston crown on the ship,s job site is being actually inevitably welded with mild filler metals. Therefore in this study, filler metals such as E4301, E4313 and E4316 were welded at SS401 steel as the base metal, and corrosion property of their weld metals in the case of post weld heat treatment or not was investigated with some electrochemical methods such as measurement of corrosion potential, cathodic and anodic polarization curves, cyclic voltammogram and polarization resistance etc. in 0.1% $H_2SO_4$ solution. Corrosion resistance of the weld metal of E4301 was better than the other weld metals in the case of no heat treatment, however, its resistance was considerably decreased with post weld heat treatment(annealing:$625^{\circ}C$, 2 hr) compared to other weld metals. The weld metals of E4313 and E4316 showed a relatively good corrosion resistance by post weld heat treatment.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.241-246
• /
• 2005

본 연구는 컨테이너 크레인이 강풍에 대비하여 크레인을 고정하는 계류 시에 75m/s의 풍하중이 50ton급 컨테이너 크레인에 작용될 때, 풍향변화와 기계실의 위치 변화가 50ton급 컨테이너 크레인의 구조적 안정성에 미치는 영향을 분석하였다.. 본 연구에 적용된 설계 풍하중은 "건축물 하중 기준"에 의거하여 산출하였으며. 풍향은 $0^{\circ}\~180^{\circ}$를 $15^{\circ}$ 간격으로 적용하여 각 지지점에서의 반력을 분석하였다. 그리고 전체 자중의 $15\%$를 차지하는 기계실의 위치 변화가 컨테이너 크레인의 구조 안정성에 미치는 영향을 분석하였다. 그리고 이 결과들을 바탕으로 컨테이너 크레인의 전도방지장치인 타이다운(Tie-down)의 설계기준을 제시하였다.

• 분석과학
• /
• 제16권3호
• /
• pp.226-231
• /
• 2003

국내와 국외에서 생산된 두 가지 종류의 AAS 기기를 이용하여 대기분진 시료를 분석하였다. 국내에서 생산된 제품의 경우, 단색화 장치의 성능면에서 선택된 파장들에 대한 광량의 세기가 우수하게 관찰되었다. 그리고 원자화장치의 경우, 재현성을 높이기 위하여 미세방울을 제외한 모든 큰 방울을 폐기 잔유물이 남지 않도록 하였다. 기기의 검출부에서는 저역 통과 filter를 사용하여, 데이터의 노이즈를 줄였다. Au 표준 용액을 이용한 검출한계 실험 분석치는 약 $0.015{\mu}g/L$ 수준의 높은 감도로서 외국사의 성능과 뚜렷한 큰 차이를 구분하기는 어려웠다. 본 연구진은 이러한 분석기법을 활용하여 서울시내 7개 지역 주요 관측점을 중심으로 2001년부터 2002년 봄까지 일년 동안 대기보전시료를 채취하였다. 이들 시료를 이용하여 분진 중에 결합된 중금속성분의 (Pb, Cu, Mn, Cd, Ni, Fe, Cr, Co, Mg, Al) 농도를 분석하였다.

• 한국안전학회지
• /
• 제35권5호
• /
• pp.121-127
• /
• 2020

Since the Fukushima nuclear accident in 2011, the public were concerned about the safety of Nuclear Power Plants (NPPs) in extreme natural disaster situations, such as earthquakes, flooding, heavy rain and tsunami, have been increasing around the world. Accordingly, the Stress Test was conducted in Europe, Japan, Russia, and other countries by reassessing the safety and response capabilities of NPPs in extreme natural disaster situations that exceed the design basis. The extreme natural disaster can put the NPPs in beyond-design-basis conditions such as the loss of the power system and the ultimate heat sink. The behaviors and capabilities of NPPs with losing their essential safety functions should be measured to find and supplement weak areas in hardware, procedures and coping strategies. The Loss of Ultimate Heat Sink (LUHS) accident assumes impairment of the essential service water system accompanying the failure of the component cooling water system. In such conditions, residual heat removal and cooling of safety-relevant components are not possible for a long period of time. It is therefore very important to establish coping strategies considering all available equipment to mitigate the consequence of the LUHS accident and keep the NPPs safe. In this study, thermal hydraulic behavior of the LUHS event was analyzed using RELAP5/Mod3.3 code. We also performed the sensitivity analysis to identify the effects of the operator recovery actions and operation strategy for charging pumps on the results of the LUHS accident.

• Safety and Health at Work
• /
• 제7권1호
• /
• pp.72-77
• /
• 2016

Background: This study aimed to determine the prevalence and factors related to needle stick injuries (NSIs) and to assess related safety measures among a sample of Iranian nurses. Methods: In this cross-sectional study, a random sample of 168 registered active nurses was selected from different wards of one of the hospitals of Shiraz University of Medical Sciences (SUMS). Data were collected by an anonymous questionnaire and a checklist based observational method among the 168 registered active nurses. Results: The prevalence of NSIs in the total of work experience and the last year was 76% and 54%, respectively. Hollow-bore needles were the most common devices involved in the injuries (85.5%). The majority of NSIs occurred in the morning shift (57.8%) and the most common activity leading to NSIs was recapping needles (41.4%). The rate of underreporting NSIs was 60.2% and the major reasons for not reporting the NSIs were heavy clinical schedule (46.7%) and perception of low risk of infection (37.7%). A statistically significant relationship was found between the occurrence of NSIs and sex, hours worked/week, and frequency of shifts/month. Conclusion: The study showed a high prevalence of NSIs among nurses. Supportive measures such as improving injection practices, modification of working schedule, planning training programs targeted at using personal protective equipment, and providing an adequate number of safety facilities such as puncture resistant disposal containers and engineered safe devices are essential for the effective prevention of NSI incidents among the studied nurses.

• Safety and Health at Work
• /
• 제7권1호
• /
• pp.32-37
• /
• 2016

Background: Previous research has shown that paramedics are exposed to risks in the form of injuries to the musculoskeletal system. In addition, there are studies showing that they are also at increased risk of cardiovascular disease, cancer, and psychiatric diseases, which can partly be explained by their constant exposure to stress. The aim of this study is to evaluate whether the use of shoulder straps decreases physical effort in the form of decreased heart rate and cortisol concentration. Methods: A stretcher with a dummy was carried by 20 participants for 400 m on two occasions, one with and one without the shoulder straps. Heart rate was monitored continuously and cortisol samples were taken at intervals of 0 minutes, 15 minutes, 30 minutes, 45 minutes, and 60 minutes. Each participant was her or his own control. Results: A significant decrease in heart rate and cortisol concentration was seen when shoulder straps were used. The median values for men (with shoulder straps) at 0 minutes was 78 bpm/21.1 nmol/L (heart rate/cortisol concentration), at 15 minutes was 85 bpm/16.9 nmol/L, and at 60 minutes was 76 bpm/15.7 nmol/L; for men without shoulder straps, these values were 78 bpm/21.9 nmol/L, 93 bpm/21.9 nmol/L, and 73 bpm/20.5 nmol/L. For women, the values were 85 bpm/23.3 nmol/L, 92 bpm/20.8 nmol/L, and 70 bpm/18.4 nmol/L and 84 bpm/32.4 nmol/L, 100 bpm/32.5 nmol/L, and 75 bpm/25.2 nmol/L, respectively. Conclusion: The use of shoulder straps decreases measurable physical stress and should therefore be implemented when heavy equipment or a stretcher needs to be carried. An easy way to ensure that staff use these or similar lifting aids is to provide them with personalized, well-adapted shoulder straps. Another better option would be to routinely sewn these straps into the staff's personal alarm jackets so they are always in place and ready to be used.

• 한국지능시스템학회논문지
• /
• 제19권5호
• /
• pp.699-705
• /
• 2009

본 논문은 지게차 AGV(autonomous ground vehicle)의 자율주행을 위한 제어 방법에 관한 연구이다. 기존에 개발된 지게차 AGV의 위치측정 방법으로는 자기-자이로 유도(magnet-gyro guidance) 방식과 유선 유도(wire guidance) 방법이 있지만, 유지보수에 대한 지속적인 노력과 비용문제가 있으며, 작업 환경의 변화에 따라 작업 환경을 재구성해야하는 단점이 있다. 따라서 본 논문에서는 외란에 강인하고 작업 환경 및 작업 내용의 변경에 유연한 시스템을 구축하기 위해 레이저 내비게이션 센서와 엔코더, 자이로 센서의 센서융합을 통한 위치측정 시스템을 개발하였다. 또한 팔레트를 하역 운송해야하는 지게차 AGV의 주행제어를 위해 팔레트와 지게차 AGV 사이의 거리 차와 각도 차를 바탕으로 퍼지 제어 및 비례 제어를 이용한 주행제어기를 설계하였다. 본 연구에서 제안한 지게차 AGV를 위한 제어 시스템의 성능 분석을 위해 물류 운송작업이 가능한 작업공간에서 동일한 하역 작업을 10회 반복 하였다. 그 결과, 시뮬레이션에 의해 생성된 경로와 실제 주행경로의 최대 평균 오차가 87.77mm를 가짐을 확인하였다.

• 한국안전학회지
• /
• 제36권5호
• /
• pp.18-26
• /
• 2021

The effect of heavy construction equipment on the excavated slope is investigated by slope stability analysis. A mobile crane with 500 kN capacity is applied as a working load to the background surface of the excavated slope, in both sandy soil and clay, designed to guarantee the safety of slope stability. Major parameters such as the distance between the edge of the slope and the mobile crane, groundwater level, and ground plate size of the mobile crane are considered. Only 23.8% and 14.3% of the analysis models with sandy soil and clay excavated slope, respectively, satisfied the slope stability. By changing the slope of the sandy soil from 1:1.0 to 1:1.2, the number of analysis models securing slope stability increased from 23.8% to 40.5%. For the clay excavated slope, the analysis models securing slope stability increased from 14.3% to 42.9% by changing slope inclination from 1:0.8 to 1:1.2. In addition, it is found that the increase in the size of the ground plate of the mobile crane increases the analysis models that secure slope stability. Therefore, it is an effective way to relax the excavated slope's inclination angle and simultaneously increase the ground plate size to guarantee stability.

• 해양환경안전학회지
• /
• 제25권4호
• /
• pp.482-488
• /
• 2019

최근 수상 레저 사업장과 레저기구의 개수는 지속해서 성장하고 있다. 수상레저기구 중에서도 카약과 카누의 보급률이 크게 증가하고 있다. 기존에는 주로 FRP 재료를 사용하여 제작하였으나, 지구온난화, 천연자원 고갈 등의 문제로 인해 청정에너지 및 신재생 에너지에 대한 필요성이 대두됨에 따라 탄소섬유에 대한 수요도 빠르게 증가하고 있다. 본 연구에서는 이러한 사회적인 변화 의식에 부합하기 위하여, 탄소섬유를 적용한 보급형 카약을 설계하고, 제품의 신뢰성을 검증하기 위하여 저항성능 및 구조 안전성 평가를 수행하였다. 속도 변화에 따른 압력저항과 마찰저항 변화를 검토하였으며, 속도 2.6 m/s 이상에서는 압력저항이 크게 증가하면서 전체저항이 커지는 현상이 발생한다. 현재 카약 구조는 운용 시 고려할 수 있는 설계하중을 고려 시, 충분한 안전율을 갖고 있음을 확인하였다.

• 해양환경안전학회지
• /
• 제25권1호
• /
• pp.122-129
• /
• 2019

신조 방식의 제조업의 특성상 경기 사이클이 존재하기 때문에, 장기적으로 이를 대처할 동반 산업이 절실하게 필요로 하고 있다. 이러한 요구에 적합한 분야가 수리조선업 분야이다. 수리조선업을 운영하기 위해서는 플로팅도크가 필수적으로 필요로 하며, 대부분 노후화된 플로팅도크를 해외로부터 수입한 후, 개/보수를 통하여 운용하고 있다. 그러나, 사용연한이 최소 30년 이상이고, 운용 시 특정 선급에 입급을 시키지 않기 때문에, 안전성에 대한 정확한 지침은 전무한 상태이다. 본 연구에서는 노후화된 플로팅도크의 계측한 두께 정보를 활용하여, 구조강도 검토를 수행하고, 운용중인 플로팅도크의 잔류 구조강도를 분석하였다. 연구를 통하여 도출된 주요 결과들은 유사 설비의 구조 안전성 검토에 대한 가이드라인을 참조할 수 있으며, 개/보수 시 이러한 방법을 활용하면 빠른 시간 내에 최적 해를 찾을 수 있을 것으로 기대된다.