• 한국CDE학회논문집
• /
• 제15권1호
• /
• pp.70-83
• /
• 2010

Recently, floating cranes are mainly used to erect heavy blocks or cargos for constructing ships in many shipyards. It is important to estimate the dynamic motion of the heavy cargo suspended by a floating crane and the tension of the wire ropes between the floating crane and the heavy cargo. In this paper, the coupled dynamic equations of motion are set up for considering the 6 degree-of-freedom floating crane and the 6-degrees-of-freedom heavy cargo based on multibody system dynamics. Depending on the cargo weight, the motion of the floating crane would be changed to nonlinear state. The nonlinear terms in the equation of motion are considered. In addition, the nonlinear hydrostatic force, the linear hydrodynamic force, wire rope force, mooring force and gravity force are considered as the external forces. As the result of this paper, we analyze the engineering effect for erecting the heavy cargo by using the floating crane.

• 한국항만경제학회지
• /
• 제33권3호
• /
• pp.35-52
• /
• 2017

중량물 물류에 대한 관심과 수요는 경제 규모가 확대되고 플랜트 산업이 활성화되는 추세에 따라 점점 더 많아지고 다양해지고 있다. 이러한 화물들이 해상운송 또는 육상운송을 통하여 이동하고 있으나 중량물 물류에 대한 실태 분석 연구 및 체계적인 조사는 전무하거나 미흡한 실정이다. 따라서 본 연구는 기존 연구가 거의 전무한 중량물 물류에 대하여 중량화물의 개념, 법령, 제도 및 운송현황을 심층 분석하고 실증 분석을 통하여 도출된 문제점에 대하여 개선 방안을 제안하고자 한다. 중량물 물류에 영향을 미치는 요인에 대한 회귀 분석 결과로는 통계적으로 유의한 변수는 근무환경이 종속 변수인 경우 운송 빈도와 법/절차/제도인 것으로 나타났다. 이는 운송 빈도가 많지 않고 법/절차/제도가 양호하면 근무 환경이 좋은 것으로 인식하고 있는 것으로 파악되었다. 아울러 상관 분석을 실시한 결과 통계적으로 유의한 변수는 화물의 중량과 화물의 크기, 근무환경과 법/제도/절차이며 높은 상관관계를 나타내고 있다. 이는 화물의 크기가 중량과 비례하고 있는 경향을 나타내고 있으며 법/절차/제도가 양호하면 근무환경이 좋은 것으로 인식하는 있는 것으로 분석되었다. 도출된 문제점에 대한 개선 방안을 정리하면 다음과 같다. 첫째, 중량화물에 대한 개념을 명확히 정립할 필요가 있다. 둘째, 중량화물과 관련한 육 해상운송 관련 법 규정 및 조항이 마련되어야 한다. 셋째, 중량화물 운송 수단에 대한 분류 체계를 개선하여야 한다. 넷째, 운송실적 통계 및 집계기준 제도의 개선이 필요하다. 다섯째, 중량물 물류 관리시스템을 개선하여야 한다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.95-100
• /
• 2011

In general, thickness of bottom floor in fore/aft cargo hold region for container ship has been determined based on FEM analysis result of mid cargo hold region. But this approach has room for improvement because section shape and frame spacing in fore/aft cargo hold of container ship are quietly different from those of mid cargo hold. From this study, correlation between FEM result and grillage analysis result has been investigated and simple method for thickness determination of bottom floor in fore/aft cargo hold using newly improved grillage analysis is proposed.

• 한국항해학회지
• /
• 제20권2호
• /
• pp.15-32
• /
• 1996

The Internation Maritime Organization (IMO) has required that ships other than cellular-ships which carry cargo units and other entities should be provided with a cargo securing manual. A number of serious accidents has resulted from improper stowage and insufficient securing of heavy cargo. The cargo claims caused by the accidents stated above not only reduce the number of shippers but also reduce their benefits. The following four basic safe items should be considered carefully in the carriage by sea in case of two tiers loading of heavy cargoes packed with wooden case if it is a general cargo ship. a) Safe stowing place b) Safe lashing c) Protecting crushing goods d) Adequate dunnage. All operators of cargoes must be reminded that only the proper stowge and securing of heavy cargos can prevent from the occurrence of such accidents in the future. This paper intends to analyze the unigue damage mechanism for two tiers loading of heavy cargoes on the general cargo ships encountered in the rough sea, and suggest the countermeusere to prevent the identical accidents in the future.

• 산업경영시스템학회지
• /
• 제46권4호
• /
• pp.160-172
• /
• 2023

In contemporary global warfare, the significance and imperative of air transportation have been steadily growing. The Republic of Korea Air Force currently operates only light and medium-sized military cargo planes, but does not have a heavy one. The current air transportation capability is limited to meet various present and future air transport needs due to lack of performance such as payload, range, cruise speed and altitude. The problem of population cliffs and lack of airplane parking space must also be addressed. These problems can be solved through the introduction of heavy cargo planes. Until now, most studies on the need of heavy cargo plane and increasing air transport capability have focused on the necessity. Some of them suggested specific quantity and model but have not provided scientific evidence. In this study, the appropriate ratio of heavy cargo plane suitable for the Korea's national power was calculated using principal component analysis and cluster analysis. In addition, an optimization model was established to maximize air transport capability considering realistic constraints. Finally we analyze the results of optimization model and compare two alternatives for force structure.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.52-58
• /
• 2009

Openings for access to cargo holds are cut on horizontal stringers in every bulkhead of container carriers. But, they are positioned at the edge of stringer width to make minimum space for access and these openings are required to be stiffened by owners and classifications respectively. In this paper, the cargo hold bulkhead stringers with openings for 6,500 TUE container carriers were reviewed by FE analysis to be conducted with the results of hold analysis for 6,500 TUE container carriers classed to GL, DNV, LR and BV respectively, and purpose of this paper is to establish yard's standard of the reinforcement for these openings.

• 대한교통학회지
• /
• 제29권6호
• /
• pp.75-83
• /
• 2011

본 연구에서는 항공화물 서비스 경쟁력 평가 요소 및 중요도를 결정하고, 실제 항공화물 운송사에 대한 서비스 품질을 평가하고자 한다. 항공화물 서비스에 대한 평가 대상을 Skyteam의 주요 화물 서비스 상품인 Equation Heavy, Equation, Variation, Dimension로 정하였고, 이 서비스 상품에 대한 품질 평가를 실행하였다. 본 분석은 전문가 설문 조사, AHP 및 퍼지적분(Fuzzy Integral) 등의 방법론들을 적용하였고, 선행 연구와 전문가 인터뷰, 그리고 요인분석을 통해 주요 평가요소를 추출하여 서비스 품질 평가모형을 구축하였다. 주요 평가요소는 인프라, 신뢰성, 신속 대응성, 경제성, 안전성 요소 등을 설정하였다. 이 다섯 가지 요소를 바탕으로 하여 수게노(Sugeno)가 제안한 퍼지 적분 방법론에서 파생된 알고리즘을 적용하여 최종으로 화물 서비스 품질을 분석하였다.

• Journal of Ship and Ocean Technology
• /
• 제12권1호
• /
• pp.35-44
• /
• 2008

As arctic energy resource is attracting public attention, arctic shipping market will also be growing in large as expected to increase in LNG trade from Arctic area to the western countries by shipping. During the voyages through such routes, collision with icebergs may be possible. In the present report, ice collision analyses are carried out from a practical point of view to verify the safety of hull structural strength of LNG carriers equipped with GTT $MKIII^{TM}$ membrane type cargo containment system. From the results of collision analyses and the operation-friendly design concept of no-repairing of cargo containment system, a safe operating envelope against ice collision is proposed for LNG carriers of membrane type cargo containment system. Based on the currently proposed safety criteria, it is concluded that LNG carriers with membrane tank type can operate safely with regard to the integrity of CCS in regions where collision between LNG carrier and iceberg is expected.

• 대한기계학회논문집A
• /
• 제36권6호
• /
• pp.681-689
• /
• 2012

본 연구에서는 병렬 연결된 해상 크레인을 이용하여 5,000ton 이상의 기가 블록급 대형 중량물을 인양할 때 해상 크레인과 대형 중량물 사이에 연결된 와이어 로프에 작용하는 장력을 계산하기 위해 다물체계 동역학 시뮬레이션을 수행하였다. 이를 위해, 해상 크레인, 바지선, 대형 중량물은 각각 6 자유도 운동을 하고, 이들 사이에는 서로간의 구속에 의한 연성을 가지도록 모델링 하였다. 또한 해상 크레인 및 바지선에 작용하는 외력으로 유체 정역학 힘과 유체 동역학 힘을 고려하였고, 각각의 물체에 독립적으로 작용한다고 가정하였다. 본 시뮬레이션 결과, 향후 해상크레인을 병렬 연결하여 대형 중량물을 인양하는 공법의 안정성을 확인하고 공학적인 지침을 마련할 수 있는 근간이 될 수 있으리라 예상한다.

• Journal of Ship and Ocean Technology
• /
• 제5권3호
• /
• pp.36-44
• /
• 2001

The collision energy absorbing characteristics of side structure of the LNG carriers which have the cargo containment systems of the spherical and the membrane types are compared. A failure mechanism of the double hull side structures of 130, 000 $m^3$ class LNG carriers under sideways collision event has been simulated by using the detailed finite element calculations. In ship collision analysis, the finite element method based on explicit time integration has been use[1 with much success. Finite element modeling techniques for detail description of structural members antral ship motion regarding the dynamic behavior allowed to investigate the effect of bow shape and the initial contact position on side shell of collided ship. In the numerical simulations of the ship-to-ship sideways collision, the effect of the colliding bow shapes and the change of the colliding ship draft are investigated. The critical collision energy which is absorbed by a side structure of a collided ship until the fore-end of colliding ship arrives at the boundary of the cargo tank is calculated. The critical speed of specified colliding ships which can not penetrate the boundary of the LNG cargo tank of the collided ship under collision accident if evaluated.