• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.23-30
• /
• 2006

Emulsified Asphalt Mixture(EAM) is more environmentally-friendly and cost-effective than typical Hot Mix Asphalt (HMA) because EAM does not produce carcinogenic substances, e.g., naphtha, kerosene, during the both of manufacturing and roadway construction process. Also, it does not require heating the aggregates and asphalt binder. However, EAM has some disadvantages. Generally EAM has a less load bearing capacity and more moisture susceptibility than conventional HMA. The study evaluated a Fiber modified EAM (FEAM) to increase load bearing capacity and to decrease moisture susceptibility of EAM. Modified Marshall mix design was developed to find Optimum Emulsion Contents (OEC), Optimum Water Contents (OWC), and Optimum Fiber Contents (OFC). A series of test were performed on the fabricated specimen with OBC, OWC, and OFC. Tests include Marshall Stability, Indirect Tensile Strength, and Resilient modulus test. Comparison analyses were performed among EAM, Fiber modified EAM (FEAM), and typical HMA to verify the applicability of EAM and FEAM in the field. Test results indicated that both of EAM and FEAM have an enough capability to resist medium traffic volume based on the Marshall mix design criteria. Also the study found that fiber modification is effective to increase the load bearing capacity and moisture damage resistance of EAM.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.312-316
• /
• 2013

The objective of this study was to establish an analytical method to detect zearalenone (ZEA) in herbal medicines and their decoctions and investigate the ZEA transfer rate from raw materials of herbal medicines to their decoctions. Herbal medicines (Trichosanthis Semenm, Eucommiae Cortex, Rubi Fructus) spiked with a known concentration of ZEA were presoaked or unsoaked (as a pretreatment) and boiled for 3 h at $100^{\circ}C$ or autoclaved for 1 h at $121^{\circ}C$. The decoction and the remnants were separated, cleaned up with an immunoaffinity column, and analyzed using HPLC. Recoveries for decoctions and remnants were 68.39-83.68% and 72.91-80.25%, respectively. ZEA was not detected in the decoction, whereas it was found in the remnants. Although ZEA in the raw material of herbal medicines was not transferred into the decoction during heating and autoclaving, the continuous monitoring for ZEA in raw herbal medicines should be carried out for the safe ingestion and utilization of herbal medicines.

• Journal of Life Science
• /
• v.29 no.12
• /
• pp.1358-1363
• /
• 2019

In this study, the effect on the free amino acid content and anti-oxidative activity of Arctium lappa samples by heat treatment were compared to obtain data on the conditions required for properly processing the root as a raw material for tea. The results of DPPH and ABTS radical scavenging activity assays showed that 180℃-4 min and 200℃-3 min treatments retained relatively high activity. All heat treatment conditions showed increased polyphenol content compared to the initial sample value of 42.72 mg/l, and the 180℃-4 min and 200-3 min treatments were higher than the others at 60.09 mg/l and 62.74 mg/l, respectively. In the free amino acid analysis of the A. lappa root tea, the tendency of the initial content was confirmed to decrease as temperature and time increased. Changes in phenylalanine, histidine, leucine, and isoleucine were found to be high, while aspartic acid and proline changes were relatively low. Overall, amino acid content decreased significantly under heating conditions above 180℃-3 min and 200℃-2 min. From these results, heat treatment of A. lappa root at 180℃-4 min was deemed optimal based on anti-oxidative activity and free amino acid content.

• Korean journal of food and cookery science
• /
• v.3 no.1
• /
• pp.78-85
• /
• 1987

2M D-glucose and 2M D-glucose with 0.4M citric acid were heated at $100^{\circ}C$ for 12, 24, 48hours. The color intensity of these browning reaction products and the fractionated materials by Sephadex G-15 were measured as absorbance at 490nm with a spectrophotometer. The control (soybean oil) and the soybean oil substrates containing equal amounts of ethanol extracts taken from each fraction group were stored at $40.0\pm$1.0^{\circ}C$$ in an incubator for 30 days Antioxidant activities of browning reaction products determined by peroxide value and TBA value the soybean oil. The results were as follows. 1. According to increase heating time and to add citric acid, color intensity was increased. Color intensity of Fraction II(fraction 10~18 high molecular weight) was higher than other fraction group, especially Fraction II of sample F (glucose with citric acid, heated at $100^{\circ}C$ for 48hours) was the highest. 2. All of the fractionated material was showed antioxidant effect but Fraction I (high molecular weight) was more oxidized than the control Fraction IV, V (fraction 28~45; low molecular weight) was showed the highest antioxidant effect.

• Fire Science and Engineering
• /
• v.22 no.1
• /
• pp.99-104
• /
• 2008

It is important to understand thermal characteristic as a method to estimate the new materials, because spontaneous ignition characterized by causing combustion in the low temperature without ignition source. If can not find out the thermal characteristics of materials, it is frequent that causes of fires could not be found. The danger level of spontaneous ignition material should be estimated and by closely studying its thermal characteristic. However, RPF(Refuse Paper & Plastic Fuel) is a solid matter and getting increasesa year by year because it is an economy profit as alternative energy for limited fossil fuels. Some time RPF occur a fire in the cases of its production process and conservation. Therefore study for thermal stability and critical ignition temperature of RPF was so imperative that the experiment by means of Bombe Calorimeter, TG-DTA, MS80, SIT-II, and Wire Basket Test was implemented. As a result, RPF had a caloric value 26.4-28.3 MJ/kg, and its initial pyrolysis temperature was $192^{\circ}C$ at heating rate 2 K/min. With the result of analysis by MS 80 which is an instrument measuring microscopic calory, pure RPF not containing water has higher caloric value than RPF containing 20% water. Also, SIT-II which is an instrument of insulated auto-ignition was ignited by $118.5^{\circ}C$. This temperature is lower than that of Wire Basket Test. The critical ignition temperature was calculated by Frank-Kamenetskii equation can cause ignition at $80^{\circ}C$ when conserved in the height of 10 m by the standard of infinity slab.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.3
• /
• pp.127-135
• /
• 1974

The samples were taken from the following localities previously classified as "Akiochi" area: Yangpyung, Puchun, and Pyungtaik, all of Kyonggi-do province. Five soil profiles were described in the field, and taken to the laboratory for physical and chemical analysis and mineralogical analysis by X-ray diffraction. The predominant clay minerals consist mainly of illite, vermiculite, chlorites and intergrade with vermiculite, and kaolinite. Illite or mica was found present in all samples and in all horizons. This was identified by the 9.83 to $10{\AA}$ (0.01) and $3.32{\AA}$ (003) basal reflections, Interhorizontal variations in mineral content and crystallinity are illustrated in their respective Xray diffractogram. Comparing the peak intensity, of the $14{\AA}$, $10{\AA}$ and $7{\AA}$ indicated the degree of weathering from the surface to the lower horizons. In general, the weathering of illite on the surface produced less pronounced $10{\AA}$ and $14{\AA}$ peak as compared to the lower horizons. The same may be said with kaolinite. On K-saturation, the $14{\AA}$ peak broadening on the low angle side was observed. This is interpreted to be due to chlorization. Heat treament from $100^{\circ}C$, $200^{\circ}C$, $400^{\circ}C$, $600^{\circ}C$, and $800^{\circ}C$. caused significant changes in the different diffractograms. Heating caused collasped of the $14{\AA}$ to $10{\AA}$ and the appearance of scattered peaks between $10-14{\AA}$. This is interpreted to the presence of vermiculite chlorite intergradient. The complete collapse of the $14{\AA}$ at $800^{\circ}C$ to $10{\AA}$ with increased intensity was attributed to the preservce of vermiculite. The principal difference among the clay minerals in each horizon is the concomitant increase and decrease in intensity with depth of the $14{\AA}$, $10{\AA}$ and $7{\AA}$ diffraction spacings. Apparently the weathering of illite ($10{\AA}$) is resulting in the formation of vermiculite ($14{\AA}$) and the interstratified material being an intermediate stage and the beginning of the formation of vermiculite. Some broadening- in the 17 to $18{\AA}$ was observed in Puchun-1 Pyungtaik-1 and Pyungtaik-2 specially so in the lower horizon in the Ca or Mg-saturated sample. Heated treatment tend to shift this peak to $14{\AA}$ indicating the presence of regular layering of the interstratified complex. The high amount of extractable aluminum and iron coupled with low exchange capacity indicate that iron and aluminum plays an important role in the weathering of these soils and is responsible to the low exchange capacity, high acidity and high phosphate absorptive capacity. The results presented substantiated the weathering sequence of Jackson in that mica ${\rightarrow}$ vermiculite ${\rightarrow}$ chloritezed vermiculite ${\rightarrow}$ kaolinite.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.421-429
• /
• 2020

This study examined the manufacturing process of a furnace wall excavated from the Songdu-ri Site in Jincheon, and the difference in material composition between the 11 layers of the wall using physicochemical analyses. Based on microstructure observations, these layers could be largely divided into three groups: an undercalcined first layer, calcined second to ninth layer with evidences of partial heat, and non-fired soil layers from the tenth to the eleventh layer. Particle size analyses revealed that the fired layer constituted a relatively higher content of coarse sand than the non-fired layer. This difference was further confirmed by the results of the curvature coefficient analysis. An analysis of the constituent minerals showed similar overall XRD diffraction patterns between the different layers, but variations in the intensity of the low-temperature and high-temperature minerals. This indicates that the degree of heat was different. The thermal analysis results demonstrated that the heating peak of mullite was only reached in the first and second layers of the wall, thus implying these as the layers to be finally used. Consequently, no significant difference could be observed between the materials of the various layers of the wall. Thus, it can be suggested that the furnace wall was constructed using clay, which had a composition similar to that of the soil present in the area. However, the shape and characteristics of the constituent particles between the layers displayed partial variations, and it is possible that some external materials might have been added.

• Journal of Korean Home Economics Education Association
• /
• v.3 no.1
• /
• pp.1-13
• /
• 1991

The purpose of this study is to find out problems through looking into the actual condition of management and the extent of application in cooking practice in High School Home Economics Education, and as a practical subject, to present some basic materials to contribute to accomplishing the object of High School Home Economics Education through trying to find a direction to enhance educational value. The contents of this study are these ： to study with a theoretical background character, object, and contents of Home Economics referring to related books and to investigate the actual condition of management, the extent of application to life of cooking practice unit, and standard of recognition of students and teachers about this subject and to find out rational and efficient method of management. 552 girl students and 72 home economics teachers in cities and counties in Kangwon-do were asked to answer the answer-sheet prepared. The result of this study is summerized as follows. 1. Most of the respondent regard the characters and objects of Home Economics as a matter of basic education, education for life, and education for the wholeman, but they neglect the aspect of education for a course of this subject. 2. Among the contents of Home Economics, students are much interested in the Unit of preparing table, especially in cooking. Most of the teachers teach the cooking unit with only explanation without practice because of the lack of material and human resources. 3. Students have desire to do cooking practice, but the extent of application of their real life appears to be low. 4. It appears to be necessary that boy students as well as girl students should learn Home Economics as an education for preparation for managing housework. 5. Home Economics teachers are mostly satisfied with their teaching profession. But teachers who have been teaching for 3 or 5 years appear not to be satisfied with it. 6. Although Home Economics teachers can teach Cooking practice Unit with confidence, they usually do it with theory rater than with practice, and they evaluate it after practicing, but most of them do not add the result to the student’s grade. 7. They use most of the cookers fixed on the standard list of High School Cooking Practice appliances, but they seldom use electric heating cookers.

• Korean Journal of Food Science and Technology
• /
• v.43 no.4
• /
• pp.426-431
• /
• 2011

In this study, we set an optimum blanching condition as a pretreatment condition to freeze welsh onion (Allium fistulosum L.) for the purpose of preserving the cooking material for long-term usage. With higher blanching temperature and longer processing time, the Hunter color values and the hardness of welsh onion tended to decrease, which confirmed softening of the tissue. Compared to before blanching, total bacterial counts decreased to near 2 log scale, whereas coliforms were not detected or decreased to a 1-2 log scale. Blanching by heating at 100$^{\circ}C$ for 5 min decreased peroxidase inactivity to more than 94%, whereas only 47% of the inactivity was achieved at 80$^{\circ}C$ for 1 min. The sensory evaluation for the blanched and defrosted welsh onion showed that the group blanched at 80$^{\circ}C$ for 1 min was preferred significantly (p<0.05).

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.237-242
• /
• 1998

This study was carried out to process canned ark shell with highly quality by management of proper processing conditions for prevention of oxidation and discoloration by heating. Ark shell has hemoglobin as blood pigment in red blood shell which same as other cockles. Hemoglobin is easy to come oxidation and browning reaction, and it has large contents of carotenoid as meat pigment. Proximate compositions in ark shell were 76.9% of moisture, 18.1% of crude protein, 1.8% of crude lipid, 1.3% of carbohydrate and 1.6% of crude ash. And contents of carotenoid and hemoglobin were 0.67~1.02mg% and 0.98~1.64g/dl, respectively. When the living ark shell was soaked in 2% NaCl solutions, about 89% of mud was removed after 10 hours soaking, and over 91% was removed when the pH was adjusted to 7.5. Carotenoid pigment were prepared that extracted from ark shell by using acetone. And determined visible spectrum were two peak at 452nm and 687nm, and λmax were 452nm. During thermal treatment at 95$^{\circ}C$, 111$^{\circ}C$, 116$^{\circ}C$ and 121$^{\circ}C$ for 60 minutes, retention ratio of carotenoid were 71.8%, 66.8%, 64.4% and 36.5%, and after 120 minutes retention ratio were 56.6%, 30.6%, 30.3% and 17.2%, respectively. When heated at 95$^{\circ}C$, 111$^{\circ}C$, 116$^{\circ}C$ and 121$^{\circ}C$, formation of browning material were increased at high temperature and long time treatment.