• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.395-397
• /
• 2002

Recently, electric heating using midnight power has brought a rapid increase. Therefore, the increase of midnight power use has much influenced on midnight load pattern and share more than 20% of total midnight electricity consumption. Hence, the distortion of load by using midnight power apparatus is severe and made the usage pattern ineffective electricity usage pattern. This paper analyze the load pattern of midnight power apparatus and policies that can effectively build midnight load. In addition, it provides policies on shifting midnight power apparatus load.

• Journal of Energy Engineering
• /
• v.5 no.2
• /
• pp.183-192
• /
• 1996

This paper presents a numerical model of the optimal operation pattern of the CHP system built for duel-purpose of power generation and district heat production. The model can be differently formulated in accordance with the view of planner: society, electric utility or district-heating company. Here, the operation pattern of the system components and the effect of heat price are of major interest in the study. From the case study, it was found that the optimal use of auxiliary heating equipment is very important to achieve the minimum societal cost. And, the multi-step heat pricing scheme is desirable to induce the voluntary behavior of both companies towards the societal optimal pattern.

• Fashion & Textile Research Journal
• /
• v.18 no.5
• /
• pp.716-723
• /
• 2016

The purpose of this study was to investigate the change in blood velocity(mm/sec) when compression and/or heat were applied to the knee joint for the elderly who has both normal and painful legs with osteoarthritis(OA). Experimental compression knee band was prepared from the 3D knee data of the average women in 60's. 3D replica of knee was reduced by 7, 10, and 13% from the nude pattern in course direction. Clothing pressure was measured at the front and back of each healthy and painful knee of elderly women for one minute while standing and sitting on the chair. Blood velocity was measured at 13 cm upper from the mid-patella for 15 minutes. Results are as follows: first, compression or heating treatment itself did not change blood velocity of both legs; second, combination treatment with heating and compression was effective to increase blood velocity. In details, for healthy legs, combination treatments with compression by 10% reduced pattern(about 1.3kPa) and heating($43^{\circ}C$) induced the maximal blood velocity, however, for knees with OA, 7% reduced pattern(about 1.0kPa) with simultaneous heating($43^{\circ}C$) was more effective than other cases. These results indicated that pain and spasticity of knee joint with OA could be reduced by applying heat and compression therapy, where the compression level of painful knee should be slightly lower than of healthy leg.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.6
• /
• pp.556-565
• /
• 2004

We have experimented an actual solar water heating system acquiring real data for one year period. On the basis of the operation data, it is necessary to predict the system performance such as collector efficiency and solar fraction, and to analyze the economical efficiency for system optimal design. To estimate the performance of actual systems through simulation, valid modelling for components consisting of the system should be accompanied. The present study is focused on the modelling for load patterns and operating control conditions. We proposed two load models: concentration model which gathers real loads as a meaningful group and distribution model which disperses real loads with time. If grouping of the load distribution is suitable, the predicted values by the concentration model approaches to those by the distribution model close to actual load pattern apparently. As a result, both of them are in good agreement with those by experiment.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.871-874
• /
• 2005

The effect of rice starch at different concentrations (0, 4, 6, and 8%) on dynamic rheological properties of surimi sols was investigated by small-deformation oscillatory measurements at $10^{\circ}C$ and during heating from 10 to $95^{\circ}C$. Dynamic frequency sweeps at $10^{\circ}C$ showed that the magnitudes of storage modulus (G') decreased with increasing starch concentration while those of tan $\delta$ increased. G' values of surimi-rice starch sols during heating decreased with increasing starch concentration, indicating that the pattern of G' changes during heating was influenced by the concentration of the added rice starch. In general, the characteristic G' thermograms of all samples showed a similar sol-gel transition pattern.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2204-2209
• /
• 2008

Flame pattern in burner used in steel industry that constitutes 30% of country energy consumption is generally characterized as long narrow flame pattern so that localized heating causes product quality worse and many burners are needed for proper heating. This paper deals with flat wide flame pattern which has advantage in terms of uniform heating using less number of burners. For that purpose, impinging jet system of fuel and oxidant was used for making flat wide flame. Results show that nozzle angle $75^{\circ}$ of impinging jet is found to be optimum configuration for making effective wide flame which has uniform radiation heat transfer and flame temperature is also most uniform along the flame width for that nozzle angle.

• Journal of Power System Engineering
• /
• v.8 no.1
• /
• pp.30-35
• /
• 2004

This paper represents the numerical analysis on effect of the environmental velocity for circular heating source with heat generation. In general heating system, the oil and sheath heater is widely used, but these systems have many problems. So, the heating source with carbon ingredient has been researched in many country about manufacture, thermal and electrical properties. In this research, a circular heating source was studied through numerical analysis on several conditions of unsteady state, beat generation and environmental velocity. The temperature distributions at steady state is appeared as a non-linear pattern with variations of environmental velocity. So, the correlation equation between temperature at steady state and environmental velocity was obtained.

• Computers and Concrete
• /
• v.8 no.4
• /
• pp.425-443
• /
• 2011

Most previous studies have generally overlooked the contribution of thermal stresses generated within the concrete mass when subjected to microwave heating and reported on pore-pressure as being the dominant cause of surface spalling. Also, the variation in electromagnetic properties of concrete and its effects on the microwave heating process have not been studied in detail. In this paper, finite element modeling is used to examine the simultaneous development of compressive thermal stresses and pore-pressure arising from the microwave heating of concrete. A modified Lambert's Law formulation is proposed to estimate the microwave power dissipation in the concrete mass. Moreover, the effects of frequency and concrete water content on the concrete heating rate and pattern are investigated. Results show high compressive stresses being generated especially in concrete with a high water content when heated by microwaves of higher frequencies. The results also reveal that the water content of concrete plays a crucial role in the microwave heating process.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.13 no.3
• /
• pp.148-156
• /
• 1984

The effect of inclination on the steady, two-dimensional, laminar natural convection in rectangular enclosures with localized heating from below has been investigated numerically. The enclosure was uniformly heated with a partial heat source at the center of the bottom wall and cooled from the upper wall while the other walls were insulated. The governing equations were solved numerically by using the ADI finite difference method with the SOR method. The computations were carrid out with air, Pr =0.733, in the Grashof number range, $1\times10^4\~3\times10^4$, for the inclination of the enclosures was varied from $0^{\circ}\;to\;90^{\circ}$. The effects of Grashof number and aspect ratio on the inclination for the transition of the flow pattern in enclosures were determined. From the results, it was found that the transition angles of the flow in the enclosures were greater in localized heating than in uniform heating from below, and that the inclination was to strongly effect on the heat transfer and the flow pattern within the enclosure.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.1
• /
• pp.112-119
• /
• 2000

A die-casting junction method is usually used to manufacture the tub of an IH(induction heating) jar. If there is a very small air bubble in the junction area, the thermal conductivity is deteriorated and local overheat occurs. Such problem brings serious inferiority of the IH jar. In this paper, we propose a new method to detect such defect with simply measured thermal data. Thermal distribution of preheated tubs is obtained by scanning with infrared thermal sensors and analyzed with the statistic pattern recognition method. By defining the characteristic feature as the temperature difference between sensors and using ellipsoid function as decision boundary, a supervised learning method of genetic algorithm is proposed to obtain the required parpameters. After applying the proposed method to experiment, we have proved that the rate of recognition is high even for a small number of data set.