• Biomedical Science Letters
• /
• v.11 no.1
• /
• pp.63-69
• /
• 2005

We investigated the changes of fibrinolytic and antioxidative activities of wild or cultivated Codonopsis lanceolata, which were packed in woven polypropylene (WP) film or low density polyethylene (LDPE) film and stored for 0, 15, and 30 days at refrigerated $(2\~4^{\circ}C)$ or room $(l8\~20^{\circ}C)$ temperature (So we have 16 samples, and wrote them as the abbreviated words such as W-WP-RE-15, W-WP-RO-15, W-LDPE-RE-15, W-LDPE-RO-15, W-WP-RE-30, W-WP-RO-30, W-LDPE-RE-30, W-LDPE-RO-30, C-WP-RE-15, C-WP-RO-15, C-LDPE-RE-15, C-LDPE-RO-15, C-WP-RE-30, C-WP-RO-30, C-LDPE-RE-30, C-LDPE-RO-30). Fibrinolytic activity of fresh Codonopsis lanceolata cultivated in the mountain or field were 0.8 unit (plasmin unit/ml) or 7.3 units, respectively. In descending order, the activities of wild Codonopsis lanceolata stored for 15 days were as followed; LDPE-RE (0.70 unit), WP-RO (0.52 unit), WP-RE (0.45 unit), and LDPE-RO (0.30 unit). After 30 days, fibrinolytic activities of them decreased to 0.47 unit (LDPE-RE), 0.28 unit (WP-RO), 0.21 unit (WP-RE), and 0.30 unit (LDPE-RO). Considering from the point of fibrinolytic activity, the optimal storage condition of wild Codonopsis lanceolata was packing with LDPE film and storing at $4^{\circ}C$. The change of fibrinolytic activities of Codonopsis lanceolata cultivated in the field revealed the similar trend as wild samples, but the fibrinolytic activities of 30 days-stored samples were maintained better than the wild Codonopsis lanceolata. Fibinolytic activity of wild Codonopsis lancealata was increased by heating for 5 min at $100^{\circ}C$ and decreased by addition of NaCl. Antioxidative activities of Codonopsis lanceolata were also compared from the electron donating activity. Fresh Codonopsis lanceolata had about $70\%$ of electron donating activity. Independent of cultivation area, electron donating activity dropped to $19\~74\%$ (wild Codonopsis lanceolata) and $27\~59\%$ (cultivated Codonopsis lanceolata) during 15 days storage. But after 30 days storage, we obtained the unexpected results, which meant that the activities were higher activities than 15 days-stored samples or even though the fresh samples. In general, Codonopsis lanceolata could maintain antioxidative activities most strongly with LDPE film and chilled condition.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.362-367
• /
• 2006

Waste activated sludge(WAS) collected from domestic wastewater treatment plant is biomass that contains large quantities of organic matter. However, relevant literature show that the bio-hydrogen yield using WAS was too low. In this study, the effect of pretreatment of WAS on hydrogen yield was investigated. Pretreatment includes acid and alkali treatments, grinding, heating, ozone and ultrasound methods. After pretreatment organic matters of WAS were solubilized and soluble chemical oxygen demand(SCOD) was increased by 14.6 times. Batch experiments were conducted to investigate the effects of pre-treatment methods and buffer solution, hydrogen partial pressure, and sodium ion on hydrogen production from WAS by using heated anaerobic mixed cultures. Experimental results showed that addition of buffer solution, efficient pre-treatment method with alkali solution, and gas sparging condition markedly increased the hydrogen yield to 0.52 mmol $H_2/g$-DS.

• Microbiology and Biotechnology Letters
• /
• v.45 no.3
• /
• pp.236-242
• /
• 2017

The conversion of marine biomass to renewable energy has been considered an alternative to fossil fuels. Butanol, in particular, can be used directly as a fuel. In this experiment, the brown alga Undaria pinnatifida was selected as a biomass for biobutanol production. Hyper thermal (HT) acid hydrolysis was used as an acid hydrolysis method to produce monosaccharides. The optimal pretreatment conditions for U. pinnatifida were determined as slurry with 10% (w/v) U. pinnatifida content and 270 mM $H_2SO_4$, and heating at $160^{\circ}C$ for 7.5 min. Enzymatic saccharification was carried out with Celluclast 1.5 L, Viscozyme L, and Ultraflo Max. The optimal saccharification condition was 12 U/ml Viscozyme L. Fermentations were carried out for the production of acetone, butanol, and ethanol by Clostridium acetobutylicum KCTC 1724, Clostridium beijerinckii KCTC 1785, and Clostridium tyrobutyricum KCTC 5387. The fermentations were carried out using a pH-control. The optimal ABE fermentation condition determined using C. acetobutylicum KCTC 1724 adapted to 160 g/l mannitol. An ABE concentration of 9.05 g/l (0.99 g/l acetone, 5.62 g/l butanol, 2.44 g/l ethanol) was obtained by the consumption of 24.14 g/l monosaccharide with $Y_{ABE}$ of 0.37 in pH 5.0.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.301-308
• /
• 1987

The results of experiment to find out the optimum pasteurization condition by heating from $50^{\circ}C$ to $70^{\circ}C$ at intervals of $5^{\circ}C$ and to review chemical composition, microbiological aspects and keeping quality were summarized as follows: 1. The milk sample pasteurized at $50-70^{\circ}C$ showed the decreased pH value from 6.55 to 6.42 while the contents of protein, fat, lactose and ash did not have significant changes. 2. Non-casein nitrogen and filterable nitrogen decreased while casein nitrogen and non protein nitrogen increased as the heat treatment increased. 3. The content of calcium and vitamin C decreased and artificial digestibility for the pasteruized milk increased from 14.07% to 20.00% by the heat treatment. 4. Milk pasteurized at $65^{\circ}C$ had viable bacteria counts $1.3{\times}10^4/m{\ell}$, coliforms negative, psychrotrophic bacteria $9.5{\times}10^2/m{\ell}$ and 99.0% pasteurization effect. 5. Milk pasteurized at $65^{\circ}C$ did not show significant changes in chemical composition and microbiological aspects at $4^{\circ}C$ in refrigerator.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.613-620
• /
• 2013

Concrete has been recognized as a material which is resistant to high temperatures, but chemicophysical property of concrete is changed by the high temperature. So, mechanical properties of concrete may be reduced. Because of this, standards and researches on the degradation of the mechanical properties of concrete at high temperatures have been presented. However, research data about the state that considering the loading condition and high-strength concrete is not much. Therefore, this study evaluated the high-temperature properties of high-strength concrete by loading condition and elevated temperature. The stress-strain, strain at peak stress, compressive strength, elastic modulus, thermal strain and the transient creep are evaluated under the non-loading and $0.25f_{cu}$ loading conditions on high strength concrete of W/B 12.5%, 14.5% and 20%. Result of the experiment, decrease in compressive strength due to high temperature becomes larger as the compressive strength increases, and residual rate of elastic modulus and compressive strength is high by the shrinkage caused by loading and thermal expansion due to high temperature are offset from each other, at a temperature above $500^{\circ}C$.

• Journal of the Korea Concrete Institute
• /
• v.29 no.2
• /
• pp.141-148
• /
• 2017

This study is experimentally investigated the effects of various steam curing parameters on the early-age compressive strength development of high strength concrete (over 40 MPa) in the precast plant production. High strength concrete are used only ordinary portland cement (type I) and water-cement ratio selected 3cases (25%, 35% and 45%). Also, steam curing parameters are as followings ; (1) Preset period 2cases (3 hours and 6 hours) (2) Maximum curing temperature 3cases ($45^{\circ}C$, $55^{\circ}C$ and $65^{\circ}C$) (3) Maintenance time of curing temperature 3cases (4 hours, 6 hours and 8 hours) (4) Maximum rate of heating and cooling $15^{\circ}C$/hr. Initial setting time and adiabatic temperature rising ratio of these concrete according to water-cement ratio are tested before main tests and examined the compressive strength development for the steam curing parameters. Also compressive strength are compared with optimum steam curing condition and standard curing at test ages. As test results, the optimum steam curing conditions for high strength concrete(over 40 MPa) are as followings. (1) Preset period ; over initial setting time of concrete (2) Maximum curing temperature ; bellow $55^{\circ}C$ (3) Maintenance time of curing temperature ; bellow 6hours. Also strength development of steam curing concrete show in the reversed strength at 28 days. It is to propose an efficient steam curing condition for high strength concrete in the precast method.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.3
• /
• pp.362-369
• /
• 1996

Seven different drying methods were tested in peony roots of Euisung cultivar, harvested in February, in three year's old plant. The roots were selected in length and diameter and half of the samples were removed cork-layers to compare the effects of cork-layer in processing of drying. The 3$0^{\circ}C$ heat drying without cork-layer reduced in days to drying by five days compared to those of the with cork-layers at the same temperature. The 5$0^{\circ}C$ heat drying after cork-layers removed was the most effective in days to drying. In quality of skin color of the 5$0^{\circ}C$ heating was worse to compare with the lower drying temperature. In the drying at room temperature and the heat drying at lower temperature, the paeoniflorin content in drying after cork-layers removed were higher than that of the drying with cork-layers. However, in the boiling water treatment, the paeoniflorin contents in drying after cork-layers removed were lower than those of with cork-layers. In heat drying, paeoniflorin content showed a decreasing tendency to increase of drying temperature. Total sugars in the peony roots showed a decreasing tendency according to the drying temperature increasing, but starch concentration showed a increasing tendency at the same condition. Concentrations of crude protein, crude fiber and crude ash were showed no differences in various drying methods and the materials with or without cork-layers. Relationships between the paeoniflorin and total sugars, and the paeoniflorin and starch were different significantly by the materials of cork-layers removed or not. The 30~4$0^{\circ}C$ heat drying without cork-layers was the most advisable condition for drying in paeoniflorin concentration, days to drying and skin color after drying.

• Analytical Science and Technology
• /
• v.16 no.5
• /
• pp.399-406
• /
• 2003

This study was conducted to find out the analysis condition of selenium(Se) in oil refinery wastewater with a high concentration of Se using the atomic absorption spectrometry with hydride generation system (HG-AAS). From various experiments that reduced Se(VI) to Se(IV), the optimum pretreatment condition was determined to be a sample volume of 10 mL, HCl 10 mL, with a 30 min heating time in a water bath. In oil refinery wastewater, as the concentration of organics and constitution became higher, the recovery rates of Se decreased. Therefore, three acid digestion methods ($HNO_3/HClO_4$ digestion, $KMnO_4$ digestion, and microwave acid digestion) were tested on the recovery rates of Se in reference to the digestion of organics, petroleum and oxidation from organic Se(org.), Se(IV) to Se(VI). The experiment results showed that the average recovery rate of Se was the highest in microwave acid digestion, although all of the digestions were more than 90%. In consequence, the pretreatment procedure of microwave digestion followed by HCl addition was the most suitable for selenium analysis in oil refinery wastewater by using HG-AAS.

• Journal of Korean Home Economics Education Association
• /
• v.3 no.1
• /
• pp.1-13
• /
• 1991

The purpose of this study is to find out problems through looking into the actual condition of management and the extent of application in cooking practice in High School Home Economics Education, and as a practical subject, to present some basic materials to contribute to accomplishing the object of High School Home Economics Education through trying to find a direction to enhance educational value. The contents of this study are these ： to study with a theoretical background character, object, and contents of Home Economics referring to related books and to investigate the actual condition of management, the extent of application to life of cooking practice unit, and standard of recognition of students and teachers about this subject and to find out rational and efficient method of management. 552 girl students and 72 home economics teachers in cities and counties in Kangwon-do were asked to answer the answer-sheet prepared. The result of this study is summerized as follows. 1. Most of the respondent regard the characters and objects of Home Economics as a matter of basic education, education for life, and education for the wholeman, but they neglect the aspect of education for a course of this subject. 2. Among the contents of Home Economics, students are much interested in the Unit of preparing table, especially in cooking. Most of the teachers teach the cooking unit with only explanation without practice because of the lack of material and human resources. 3. Students have desire to do cooking practice, but the extent of application of their real life appears to be low. 4. It appears to be necessary that boy students as well as girl students should learn Home Economics as an education for preparation for managing housework. 5. Home Economics teachers are mostly satisfied with their teaching profession. But teachers who have been teaching for 3 or 5 years appear not to be satisfied with it. 6. Although Home Economics teachers can teach Cooking practice Unit with confidence, they usually do it with theory rater than with practice, and they evaluate it after practicing, but most of them do not add the result to the student’s grade. 7. They use most of the cookers fixed on the standard list of High School Cooking Practice appliances, but they seldom use electric heating cookers.

• Journal of Biosystems Engineering
• /
• v.39 no.1
• /
• pp.47-56
• /
• 2014

Purpose: In protected crop production facilities such as greenhouse and plant factory, farmers should be present and/or visit frequently to the production site for maintaining optimum environmental conditions and better production, which is time and labor consuming. Monitoring of environmental condition is highly important for optimum control of the conditions, and the condition is not uniform within the facility. Objectives of the paper were to investigate spatial and vertical variability in ambient environmental variables and to provide useful information for sensing and control of the environments. Methods: Experiments were conducted in a strawberry-growing greenhouse (greenhouse 1) and a cherry tomato-growing greenhouse (greenhouse 2). Selected ambient environmental variables for experiment in greenhouse 1 were air temperature and humidity, and in greenhouse 2, they were air temperature, humidity, PPFD (Photosynthetic Photon Flux Density), and $CO_2$ concentration. Results: Considerable spatial, vertical, and temporal variability of the ambient environments were observed. In greenhouse 1, overall temperature increased from 12:00 to 14:00 and increased after that, while RH increased continuously during the experiments. Differences between the maximum and minimum temperature and RH values were greater when one of the side windows were open than those when both of the windows were closed. The location and height of the maximum and minimum measurements were also different. In greenhouse 2, differences between the maximum and minimum air temperatures at noon and sunset were greater when both windows were open. The maximum PPFD were observed at a 3-m height, close to the lighting source, and $CO_2$ concentration in the crop growing regions. Conclusions: In this study, spatial, vertical, and temporal variability of ambient crop growing conditions in greenhouses was evaluated. And also the variability was affected by operation conditions such as window opening and heating. Results of the study would provide information for optimum monitoring and control of ambient greenhouse environments.