• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1041-1046
• /
• 2001

Solutions of fructose, glucose and sucrose were heated without catalyst at various temperature for different length of time. Changes in the formation of early caramelization product and browning intensity as well as pH of heated sugar solutions were determined. Reducing powers of caramelization products (CP) and their inhibitory effects on polyphenol oxidase (PPO) were also determined and their correlations were discussed. The early CP and browning intensity increased with temperature and time, in the order of heated fructose>sucrose>glucose solutions (p<0.005), while pH decreased. pHs of sugar solutions heated at 20$0^{\circ}C$ showed in the range of 3.32 ~ 3.50. Reducing power of CP as well as their inhibitory effect on PPO also increased with temperature and time, respectively. Among sugar solutions, reducing power showed the same trends as above at both 15$0^{\circ}C$ and 17$0^{\circ}C$ (p<0.001). However, those of heated fructose solutions were the highest in the early stage, while those of heated sucrose solutions were the highest in the final stage at 20$0^{\circ}C$. This is due to the difference in CP formed. Sucrose solution heated at 20$0^{\circ}C$ showed the highest inhibitory effect, reducing PPO activity by 34.6%. From these results, it is considered that the inhibitory effect of CP on PPO is partly related to their reducing power.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.157-160
• /
• 2004

If concrete structure is exposed to high temperature such as long-term fire, damages affecting partial or whole structure system may occur. Therefore accurate diagnosis of deterioration is needed based on mechanism of fire deterioration in general concrete structures. Fundamental information and data on the properties of concrete exposed to high temperature are necessary. Especially, the amount of fire damage done to concrete depends on the materials, the standard design compressive strength of concrete, and heated temperature. So, the object of this study is to present data for supposed heated Temperature of deteriorated concrete by fire.

• Journal of ILASS-Korea
• /
• v.21 no.4
• /
• pp.177-183
• /
• 2016

In this study, the evaporation characteristics of water or nanofluid droplets on a heated surface was investigated by visualization of the evaporation process and evaluation of the heat transfer coefficient using the droplet temperature measured. The evaporation characteristics was compared between water and nanofluid droplets and the effects of the mass ratio of nanofluid and the inclination of heated surface were analyzed. The heat transfer rate of nanofluid droplet was higher than that of water droplet. The heat transfer coefficient was increased with the increase of the mass ratio of nanofluid. The effect of the inclination of heated surface was much higher than that of fluid type used, which indicates that the inclination of heated surface should be considered as one of influential parameters in the spray cooling process.

• International journal of advanced smart convergence
• /
• v.7 no.2
• /
• pp.38-46
• /
• 2018

This study proceeded an experiment that can increase such physiological properties of heated radish extract. During the extraction of radish, including the byproduct, an increase in antioxidant properties of radish according the heating temperature was performed. Upon the extracts of radish bark and radish green extract(mucheong), the physiological functionalities and antioxidant activity were investigated. As a result, the color of radish ethanol extract in dependence of heating temperature, showed light brown color at low heating temperature and black color from $150^{\circ}C$. The total polyphenol content significantly increased as a result of heat treatment; 6.7 times and 22 times higher than the control at $110^{\circ}C$ and $150^{\circ}C$, respectively. DPPH radical scavenging ability and antioxidant property increased with increasing heating temperature; in comparison to heat-treated radish at $110^{\circ}C$ and $150^{\circ}C$, $IC_{50}$ decreased by 1/22 times. $IC_{50}$ of the control was 23times higher than $150^{\circ}C$ heat treated radish (Control $IC_{50}$:130.305). According to the graph that represents ABTS activity, antioxidant activity increased in dependence of heat treatment likewise to the total polyphenol content and DDPH radical scavenging activity. Upon heat treatment at $150^{\circ}C$, antioxidant activity in consequence of ABTS assay increased 23 times higher than the control.

• Journal of Welding and Joining
• /
• v.3 no.1
• /
• pp.11-21
• /
• 1985

The line heating is a thermoplastic working technique which is used in bending work of steel plate and in correcting the distortion of welded structure. This method is considerably effective when the water-cooling is followed. In this study, an investigation was accomplished to find the effects on the change of material properties when the line heating was applied on the high tensile steel plate of 50kg/mm^2$ grade. Some steel plates were heated to various temperatures and then cooled with water or in the air. In this study, the author measured the angular distortion continuously during line heating to find out the relation between the bending efficiency and heating or water-cooling temperature. Furthermore, its material properties were examined by the V-notch Charpy impact test, the microscope observation and the Vickers hardness test. As results, the followings were clarified. (1) The amount of angular distortion increases as the heating temperature or the water-cooling temperature rises. (2) When the steel plate is heated between 700.deg. C and 900.deg. C, and then is water-cooled over 700.deg. C, some brittle structure is observed. But if the temperature of water-cooling is below 700.deg. C, no brittle one is found. (3) When the steel plate is heated over 800.deg. C and is cooled in the air, there is no unfavrable effect.

• Journal of Biosystems Engineering
• /
• v.34 no.3
• /
• pp.175-182
• /
• 2009

This study was conducted to investigate the drying characteristics of tissue cultured mountain ginseng roots. The far infrared rays dryer of a double blast system used for this experiment can control the drying parameters such as far infrared heater temperature and air velocity. The far infrared rays drying tests of tissue cultured mountain ginseng roots were performed at air velocity of 0.4, 0.6, 0.8 m/s, under drying air temperature of 50, 60, and $70^{circ}C$, respectively. The results were compared with one obtained by the heated air drying method. The drying characteristics such as drying rate, color, energy consumption, saponin components and antioxidant activities were analyzed. The results showed that the drying rate of far infrared rays drying was faster than that of heated air drying and due to high temperature of drying air and fast air velocity, the far infrared rays drying of double blast type was superior to the heated air drying. The value of the color difference for heated air drying was 10.11${\sim}$12.99 and that of far infrared rays drying was in the range of 7.05${\sim}$7.54, which was in the same drying condition, also energy consumption of far infrared rays drying was in the range of 3575${\sim}$6898 kJ/kg-water. At the same time, the antioxidant activities using far infrared rays drying were higher than those using heated air drying.

• Food Science and Preservation
• /
• v.8 no.3
• /
• pp.331-337
• /
• 2001

The oxidative stability of tallow heated was studied by different frying condition (temperature 130, 150, and 180$^{\circ}C$;heating time, each 10hours per day, total 240hrs). Changes of physicochemical parameters such as acid value, peroxide value, iodine value, dielectric constant, content of polar components and polymer, refractive index, smoke point, viscosity and color changes in tallow heated were also measured. Acid value, dielectric constant, refractive index, viscosity, and content of polar component and polymer increased as the tallow was heated longer, whereas iodine value and smoke point decreased and peroxide value was increased and decreased repeatedly. These parameters changed to a greater extent as the heating temperature went up. The color became darkened with the increase of red and yellow values during heating. The decree of coloration was proportional to heating temperature.

• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.1041-1045
• /
• 2007

Heated onion juice was partitioned using the solvents hexane, chloroform, ethyl acetate, and butanol. The ethyl acetate fraction showed the strongest scavenging effect on the ABTS radical. The antioxidant activities of the ethyl acetate fraction from raw and heated onion (120, 130, and $140^{\circ}C$) were evaluated using radical scavenging assays. Radical and nitrite scavenging activities were higher in heated onion than raw onion, and the higher the temperature of heat treatment, the greater the radical and nitrite scavenging activities. Heated onion ($140^{\circ}C$, 2 hr) was more effective than raw onion, having higher DPPH radical scavenging (5.7-fold), hydroxyl radical scavenging (6.4-fold), superoxide radical scavenging (2.3-fold), hydrogen peroxide scavenging (11.8-fold), and nitrite scavenging (4.3-fold) activities. Onion increased its physiologically active materials after heating, and in this regard, heated onion can be used as biological material for the manufacture of health foods and supplements.

• Journal of Biosystems Engineering
• /
• v.29 no.1
• /
• pp.37-44
• /
• 2004

This study was conducted to develop a new drying method far reducing the drying cost and time and to investigate the drying characteristics of oak mushroom. A far infrared dryer of down draft air flow type used for this experiment can control the drying parameters, such as far infrared heater temperature and aeration velocity. The far infrared drying tests were performed at aeration velocities of 0.3 and 0.6m/s under the temperature of 90 and 100$^{\circ}C$ in for infrared heater, respectively. The results were compared and analyzed with those of an heated air drying method used as a control in terms of properties representing the drying characteristics. such as shrinkage rate, color, energy consumption amino acid components, drying rate and moisture ratio. The results obtained from this research can be summarized as follows. 1. The drying rate of far infrared drying was faster than that of heated air drying. With high temperature of far infrared heater and slow aeration velocity, the far infrared drying of down draft air flow type was superior to the heated air drying. 2. Most of far infrared drying conditions required less energy consumption than heated air drying. 3. The shrinkage rates of heated air drying and far infrared drying were decreased by 17.0% and 18.2∼19.8%, respectively. 4. The difference of color on oak mushroom surface before and after drying can be represented as $\Delta$E. $\Delta$E values of far infrared drying and heated air drying were 2.39∼4.55 and 6.77, respectively. 5. The amounts of free amino acids were higher in the far infrared than in the heated air drying. In addition the amounts of Gln and Glu generally were increased and those of Ala, Leu, and Val were decreased in order.

• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1387-1395
• /
• 1994

Re-hydration properties of heated and ground CaO-SiO2-H2O system were studied under hydrothermal condition in order to examine the possibility of recycling ALC waste as raw materials of ALC. Powder of calcium silicate hydrates and ALC waste without heat treatment did not show further hydration while those of heat-treated at proper temperature showed re-hydration properties under hydrothermal condition. The lath-like shape of initially synthesized tobermorite was gradually turned into small debris during heating and plate-like tobermorite was crystallized during re-hydration of the heated powders. Heated and ground ALC waste could be added to natural raw mix for ALC at the ammount up to 20% with increased compressive strength and up to 30% with slightly decreased compressive strength. The optimum heating temperature of ALC for recycling was about 50$0^{\circ}C$.