• 열처리공학회지
• /
• 제32권4호
• /
• pp.161-167
• /
• 2019

Impact toughness and fracture behavior were studied in five kinds of non-heat treating steels containing bainite; standard(0.25C-1.5Mn-0.5Cr-0.2Mo-0.15V), high V(0.3V), Ni(0.5Mn-2Ni), W(0.4W instead of Mo), and high C-Ni(0.35C-0.5Mn-2Ni) steels. The good hardness and impact toughness balance was exhibited in the $1100^{\circ}C$-rolled condition, while the impact toughness was deteriorated due to coarse grained microstructure in the $1200^{\circ}C$-rolled condition. The impact toughness decreased with increasing the hardness in all steels studied. The fracture behavior was also basically identical, that is, the fracture area was divided into 3 zones; shear and fibrous zone, fracture transition zone with ductile dimples and cleavage cracks, where the cracks initiate and grow to critical size, unstable cleavage fracture propagation zone. The energy absorbed for the critical crack formation through the plastic deformation inside the plastic zone in front of the notch root contributed to a mostly significant portion of the total impact energy.

• 열처리공학회지
• /
• 제13권6호
• /
• pp.405-411
• /
• 2000

The effects of added elements, such as Co or Nb, on wear properties of high speed steel by powder metaliurgy(PM-HSS) had been eluminated in auther's previous paper. In addition, it is generally known that the wear properties of materials have been influenced by heat-treating conditions as well. Therefore, a study has been done to clarify the effects of heat-treating conditions on wear properties of PM-HSS. The wear tests have been performed under the same conditions as the previous paper using heat-treated PM-HSS(5%Co-1%Nb) with different quenching and tempering temperatures. The result of this paper shows that wear resistance of PM-HSS is improved with relatively high quenching temperature. However, tempering temperature is not sensitive to the wear resistance in the range of high quenching temperature. It may be deduced by the fact that the shear strength of matrix by strengthening mechanisms due to not only the quenching aging but also dispersion-hardening is improved.

• 산업공학
• /
• 제6권2호
• /
• pp.171-181
• /
• 1993

In this study, a process management system is designed that can automatically control the heat treating atmosphere, and a managment software is developed to monitor and control continously the heat treating process using a n interface device. Especially, a communication protocol is developed to control and monitor atmosphere condition, temperature, surrounding gas, and time. The developed interface device, called COMPORT SELECTOR is to send and receive information from PID controllers and PLC via RS-232C communication. This system will reduce manufacturing cost and cycle time, and improve the effectiveness of working process and quality.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.424-429
• /
• 2003

Hot gas path components, which are made of nickel based superalloys, are subject to periodic replacement due to degradation of thermomechanical properties that might bring catastrophic failure during normal operation of gas turbine units. In order to rejuvenate the metallurgical condition of the serviced components, heat treating techniques such as solution annealing and aging heat treatments have widely been employed. However, the effectiveness of those typical heat treatments is not apparent enough in terms of quantitative grounds. On the other hand the demand of the rejuvenation heat treatment and hot isostatic pressing (HIP) have constantly been raised by the end users. Therefore it is necessary to verify how the typical heat treating techniques affect to the aged and degraded material. As the result of experimental work in this study, GTD-111 and GTD-222 Ni-based superalloys were collected and analyzed quantitatively through microscopic observation, microhardness evaluation and creep test.

• 한국재료학회지
• /
• 제9권7호
• /
• pp.740-747
• /
• 1999

결정립 미세화는 강도와 인성을 동시에 향상시킬 수 있는 유일한 방법이다. 제어압연과 가속냉각은 공정 중에 재결정과 결정립 조대화 거동을 조절함으로써 기계적 성질을 향상시키는 효과적인 방법으로 알려져 있으며, 반복열처리에 의한 반복상변태는 결정립 미세화 방법 중의 하나이다. 본 연구에서는 제어압연과 반복열처리를 복합 적용하여 그 효과를 관찰하였다. Mo 첨가효과와 공정변수의 효과를 관찰하기 위해 Mo이 첨가된 저탄소강 시편을 준비하여 Gleeble로 가공열처리 모의실험을 하였다. Mo첨가는 결정립 조대화 온도를 상승시키고, 오스테나이트 재결정을 억제하는 효과를 나타내었다. 오스테나이트 결정립 미세화에 가장 효과적인 공정조건은 반복 열처리 제어압연을 두번 실시하는 것이고, 첫번째보다 두번째 압연율을 더 크게 하는 것이었다

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1494-1496
• /
• 1997

The MRI Magnet is a most practical application of NbTi superconductor. In this paper, we present the main research results on superconducting wires for MRI magnet which we have developed. Cu/NbTi superconducting wires were fabricated by repeat of cold working and heat-treating process after that billets were extruded. We investigated the relation of superconductivities of wires and heat treatment condition. The correlation between cross section shape of wires and work inhomogeneity of NbTi rods was investigated by microscopic observation. The more repeatation number of cold working and heat-treating process, the higher critical current is achieved.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.228-228
• /
• 2017

Rice production and quality could be changed by temperature condition. Extremely high temperature event have been occurred more frequently for global warming. To increase rice quality against to global warming, breeding of heat tolerance rice cultivar is needed. Ilmi which is the one of Korean leading rice cultivar shows heat stress resistant character during ripening stage. Yield and quality (brown and milled rice) of Ilmi did not show significant different under high temperature condition compared to control condition. However, the main physiological characters for heat resistance of Ilmi have been not investigated yet. Therefore we try to investigate the heat tolerance characters of Ilmi. Two rice cultivars, Ilmi and Ilpum-which is heat susceptible rice cultivar, were cultivated under natural condition in wagnor pot until heading was appeared. After checking heading date, each material was cultivated under different temperature condition, heat($32/22^{\circ}C$) and control($26/16^{\circ}C$) condition. Anti-oxidant enzyme activity was checked during ripening stage in each material. Catalase and ascorbic peroxidase activity of leaf under heat stress condition were higher in Ilmi than Ilpum especially early ripening stage. Analyzing of stress resistance using $H_2O_2$, the flag leaf of Ilmi showed more green color than Ilpum with higher chlorophyll content than those of Ilpum. We also checked the amount of $H_2O_2$ content in young leaf of each material by treating high temperature. $H_2O_2$ content in each material was increased according to treatment time. However $H_2O_2$ content of young leaf in Ilmi was less than those in Ilpum. Also catalase and ascorbic peroxidase activity in leaf increased much faster in Ilmi than Ilpum. With those data, we confirmed that heat stress resistance of Ilmi is due to the higher anti-oxidant activity against to stress condition. We will investigate the heat tolerance characters of Ilmi more in further study to enhance the breeding effect of heat stress tolerance rice.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.21-24
• /
• 2003

In hot forming process of the backward end-bulkhead of a pressure hull, the blank diameter and the tool clearance are the critical factors which influence wrinkling defect, forming load and shape completeness of the product. Two F.E.A softwares with the elasto-plastic material model and rigid plastic model were utilized to predict the occurrence of wrinkling defect. Tool clearance was determined by considering the increase of blank thickness, die strength and the stretching effect. Heat treatment condition after the hot forming to recover the original properties of the material was estabilished by specimen-based heat treating experiment.

• 한국세라믹학회지
• /
• 제25권5호
• /
• pp.502-508
• /
• 1988

The $\alpha$ to $\beta$ phase transformation of $\alpha$-Si3N4 whisker and related microstructural changes have been investigated. When only $\alpha$-Si3N4 whisker was heat treated in the range 1650~175$0^{\circ}C$, the $\alpha$ to $\beta$ phase transformation occured. In this case, it eas suggested that the oxygen content in $\alpha$-Si3N4 whisker affected the transformation behavior. Although $\alpha$-Si3N4 whisker with Si was heat treated under the same condition, however, the variation of $\beta$- fraction had a similar tendency with heat treating time. Therfore, it was considered that the oxygen content in $\alpha$-Si3N4 whisker affected the transformation behavior dominently rather than the content of added Si. The added $\beta$ phase did not affect the transformation behaviro of $\alpha$-Si3N4 whisker.

• 대한한의학원전학회지
• /
• 제33권1호
• /
• pp.135-147
• /
• 2020

Objectives : This study focuses on the condition Yinynagjiao, which was first mentioned in 『Huangdineijing』, on the cause, mechanism and reason for it being described as fatal. Later doctors's understanding and treatment of this condition were examined subsequently. Methods : Verses related to Yinyangjiao from texts such as 『Huangdineijing』, 『Jinkuiyuhanjing』, 『Maijing』 were cross-examined focusing on their context and difference in expression with reference to annotations and later texts that mention Yinyangjiao. Based on the findings, its mechanism and treatment methods as found in Wenbing texts were compared with descriptions from previous texts. Results & Conclusions : According to 『Huangdineijing』, heat disease belongs to the Shanghan category, treated through promoting perspiration. In the confrontational position between JingQi and XieQi, perspiration could be understood as the result of JingQi's victory that lead to the discharge of XieQi in the form of sweat. Yinyangjiao is the opposite situation where Jing is discharged while heat toxin sinks into the body, thus being fatal, and treatment aimed for perspiration not adequately addressing the main problem which was ultimately expected to resolve through means of solid Yin Jing that would stabilize the pulse in due time. On the other hand, Wenbing scholars saw the pathogen as heat, shifting previous perspectives entirely. As a result, instead of applying pungent/warm medicinals to promote sweating, they suggested the use of cool, sweet/moist medicinals to cool the heat and nourish Yin as means of treating the condition.