• 한국재료학회지
• /
• 제5권6호
• /
• pp.699-705
• /
• 1995

질화규소 요업체에서 입계상의 변화가 파괴인성에 미치는 영향에 대해 살펴보았다 실험에는 Si$_3$N$_4$-Y$_2$O$_3$-SiO$_2$(YS)계와 Si$_3$N$_4$-Y$_2$O$_3$-A1$_2$O$_3$(YA) 계를 사용하였으며, 175$0^{\circ}C$에서 Can/HIP 처리한 후 1800~200$0^{\circ}C$ 온도구간에서 열처리시키면서 입계상의 변화에 따른 파괴인성의 변화를 조사하였다. 열처리 온도구간에서 입계상이 비정질상만으로 존재하였던 YA계의 경우는 열처리 온도가 증가되어 입성장됨에 따라 파괴인성 값이 증가되었으나, 190$0^{\circ}C$ 이상에서 열처리될 때 입계상이 결정상에서 비정질상으로 변화하였던 YS계의 경우는 오히려 파괴인성 값이 급격히 감소되었다. YS계에서 파괴인성의 급격한 저하는 열처리 온도 증가에 따라 입계상이 결정상과 비정질상의 공존 상태에서 비정질상만의 상태로 전이하며 파괴거동에 영향을 미쳤기 때문이라고 생각된다.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.11-16
• /
• 1998

$VO_2$ thin films have been prepared on borosilicate glass substrate using alkoxide method to characterize the effects of fabricating factors on thermochromic performance. The gel films formed by spin coating were converted to $V_2O_5$ phase during oxidizing heat-tratment and the $VO_2$ phase were formed by reducing heat-treatement. The thermochromic switching properties of $VO_2$ thin films are strongly affected by the crystal phase and microstructure and those could be controlled by reducing heat-treatment conditions. The ther-mochromic switching characteristics of $VO_2$ thin films synthesized were measured at IR (2.5$\mu\textrm{m}$) as the transition temperature of $63^{\circ}C$ the transition width of $3.6^{\circ}C$and the maximum and minimum transmittance of 84% and 14% respectively.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.46-55
• /
• 1998

This stud demonstrates the profiles of heavy ions (As, Sb) in silicon by high energy (1~10 MeV) implantation. Implanted profiles were measured by SIMS (Cameca 4f) and compared with simulation results (TRIM) program and analytical description method using Pearson function). The experimental results have a little bit deviation with simulation data in the case of As high energy implatation. But in the case of Sb, the experimental results are in good agreement with TRIM data. SIMS profiles are perfectly fitted with a analytical description method only using one pearson function in Sb implantation. but in the case of As, fitted profilesshow with a little bit deviations by channeling effects of SIMS profiles. Thermal annealing for electrical activation of implanted ions was carried out by furnace annealing and RTA(Rapid Thermal Annealing). Concentration-depth profile after heat treatement were measured by SR(Spreading Resistance) method.

• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.700-708
• /
• 1996

TiO2 membranes for microfiltration were prepared on $\alpha$-alumina support tube by slurry coating. The coating layer was obtained by flowing TiO2 slip on the inner surface of the alumina support. TiO2 membranes were heat-treated at 9$25^{\circ}C$ for 2 hrs. The thickness of the unsupported membrane was about 10${\mu}{\textrm}{m}$. The mean pore diameter of the membranes were 0.09 and 0.15${\mu}{\textrm}{m}$ respectively and the pure water flux was 900~1,200ι/m2.hr at room temperature and 1 bar. For a possible application of oily wastewater treatement an kerosene/wa-ter emulsion was separated in terms of flux and removal efficiency. In 60 min of operating time the flux of TiO2 membranes was 50~100 ι/m2.hr and removal efficiency was over 97% at 3kgf/cm2 of operating pres-sure and 600 ml/min of flow rate. TiO2 membranes could be recycled by reheat treatments at $600^{\circ}C$ for 2 hrs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1062-1065
• /
• 2003

본 연구에서는 초미세 $Y_2O_3:EU^{3+}$ 분말을 이용하여 나노 형광체를 제조하였다. 나노 형광체는 소량의 Eu가 도핑된 $Y_2O_3$ 재질로 구성되어 있다. 형광체 분말의 결정화를 위해 $500{\sim}900^{\circ}C$의 온도로 열처리하였다. 제조된 나노 형광체를 HRTEM으로 관찰한 결과 입자 크기가 열처리 온도에 따라 약 $4{\sim}30nm$의 분포를 나타내었다. 또한 XRD로 결정상을 분석한 결과 주로 입방정 구조로 되어 있고 소량의 단사정 구조가 포함된 $Y_2O_3$ peak가 검출되었다. EDS 분석 결과 약 $6.7{\sim}7.5%$의 Eu가 검출되었다. 약 4nm 크기의 $Y_2O_3:EU^{3+}$ 분말로 제조한 나노 형광체의 발광 특성은 주요 파장대가 612nm인 PL spectrum이 관찰되어, 적색 형광체로서의 $Y_2O_3:EU^{3+}$ 나노 분말이 제조되었다.

• 대한한방소아과학회지
• /
• 제29권2호
• /
• pp.1-15
• /
• 2015

Objectives In the theory of Korean Medicine, Cicadae Periostracum (CP) has been used to treat skin diseases such as inflammatory dermatitis, tetanus and pruritus. CP can reduce heat and disperse wind. In prior studies, anti-allergic effect and anti-inflammatory effect of CP were reported. However, there has been no report regarding the correlation of CP and allergic contact dermatitis (ACD). This study was performed to show the effects of CP in ACD induced by 2,4-dinitrochlorobenzene (DNCB) in mice. Methods In this experiment, the effects of CP on biological changes were measured, such as changes in ear and spleen weight, ear and dorsum skin thickness, clinical aspect on the dorsum skin and histological changes. The effect of proliferation rate of splenocytes was also investigated in vitro and vivo study. Results In results, CP application (CPA) group and CP application and administration (CPAA) group were significantly restrained in ear weight gain and increase in ear and dorsum skin thickness compared to the control group. In addition, CPA and CPAA group showed diminished erythema, desquamation, bloodstain, and marks. Also, the histological assessment showed that CP treatement diminished thickness of epidermis, hyperkeratosis, pigmentation and parakeratosis. Conclusions In conclusion, these data suggest that CP can decrease symptoms of ACD.

• 열처리공학회지
• /
• 제5권2호
• /
• pp.103-110
• /
• 1992

This study is aimed to investigate the effect of various thermomechanical treatments($T_6$, $T_8$ and ITMT) on the microstructure and mechanical properties of an Al-Cu-Li-Ag-Mg-Zr alloy (Weldalite 049) which has been known to strong natural aging response, good weldablity and high strength in $T_6$ sand $T_8$ temper. This experiment was performed by means of differential scaning calorimetry, tensile test, optical and transmission electron microscopy. The tensile strength in the peak aged condition shows 620, 650 MPa in $T_6$ and $T_8$(40% cold work), respectively. Also, The tensile strength is increased with cold working in $T_8$ but decreased at 60% cold working. However, the tensile strength of the intermediate thermomechanical treated speciman(ITMT) is lower than that of $T_6$ temper about 20% but the elongation is higher than two times. It might be predicted that the ITMT is effective processing to improve the toughness of this alloy. In $T_6$, $T_8$ and ITMT, the major strengthening phase is $T_1(Al_2CuLi)$ phases. and the fine $T_1$ phase which are homogeneously precipited in matrix was observed much more in $T_8$ than $T_6$ and ITMT.

• 한국광물학회지
• /
• 제29권3호
• /
• pp.103-111
• /
• 2016

Li을 포함하는 삼팔면체 스멕타이트 계열의 헥토라이트가 터키 서부 퇴적 기원의 붕소광상에서 다량 존재하는 것이 확인되었으며, Li을 포함하는 헥토라이트는 리튬 자원으로서의 개발 가능성이 높기 때문에 많은 관심의 대상이 되고 있다. 헥토라이트의 열적 변화와 산에 대한 특성은 산업적인 적용을 위해서 매우 중요한 성질임에도 불구하고 아직 완전하게 이해된 것이 없다. 이번 연구에서는 터키 붕소광상 중 $Li_2O$ 함량이 가장 높은 비가디치 광상에서 채취된 점토광석을 이용하였다. 채취한 점토 광석 내에 존재하는 헥토라이트를 Stoke's Law를 이용하여 분리한 후 열 및 산 처리 실험을 실시하여특성 변화를 검토하였다. 헥토라이트는 $84^{\circ}C$ 부근에서 흡착수 및 층간수의 탈수에 의한 강한 흡열반응이 일어나며, $600^{\circ}C$ 이후 결정수의 탈수에 의한 흡열반응이 일어난다. 저온의 흡열반응은 약 6%의 많은 중량 감소를 동반한다. $762^{\circ}C$ 부근에서 헥토라이트가 완화휘석, 크리스토발라이트 및 비정질 산화철 광물로 분해되는 발열반응이 일어난다. 0.1 M 농도의 무기산으로 1시간 헥토라이트를 반응시킨 결과 황산 ${\geq}$ 염산 > 질산 순으로 용해 정도가 높았다.

• 한국식품영양학회지
• /
• 제15권4호
• /
• pp.331-336
• /
• 2002

본 연구는 두유에 칼슘을 강화하고자 두유단백질의 칼슘내인성을 높이기 위한 방법으로 단백분해효소를 처리한 경우 효소처리 전, 후에 나타나는 단백질의 구조적 특성을 비교 분석하였다. 표면소수도는 SMP

• Journal of Acupuncture Research
• /
• 제17권3호
• /
• pp.10-24
• /
• 2000

1. Objectives : Millions of people throuout the world are affected by some form of dry eye disorder. I made researches for more effective treatments for dry eye. 2. Methodes : I refered to occidental and oriental medical records. 3. The results were as follows : Common symptoms of dry eye are dryness, burning, irritation, grittiness, itching, fatigue of eye, photophobia, congestion, mattering and tear. Treatments of dry eye are to clear away heat and fire, remove dampness, replenish Um and promote production of body fluid, tonify the blood and replenish Ki. Acupunctre and moxibustion therapy of dry eye are as follows: Very busy points of traditional regular acupuncture are Sangsong, Chanjuk, Sajukkong, Chongmyong, Sabaek, Tongjaryo, Taeyang, Pungji, Tuimup, Paekoe, Un-gyo, Chonjong, Hapkok, Yangbaek, Kansu, Yanggye, Imup, Chok-samni, Taechung, Kwangmyong, Yang-gok, Uihui, Chohae, Haenggan. Less busy points of it are Oyo, Kuhu, Sungup, Konmyong, Konmyongl, Konmyong2, Sangmyong, SanghaChongmyong, Shinmyong, Osang, Shinjong, Yonghyang, Yaemyong, Chon-yu, Chon-ju, Kwallye, Naebi, Noeho, Tuyu, Mokchang, Ponshin, Shinhoe, Yepung, Okchim, Pungbu, Kokchon, Kollyun, Nae-gwan, Tae-nung, Samumgyo, Sokolkong, Shinsu, Um-gyo, Igan, Chongok, Choktaek, Kyonjungsu, Kokchi, Kongchoe, Kyuum, Kihae, Taekolkong, Taedon, Pino, Pisu, Sabong, Samgan, Kokchi, Shinmun, Shinmaek, Shimsu, Yangno, Aengmun, Yolgyol, Oegwan, Wijung, Chang-gan, Chungjo, Chungdo, Chigu, Chium, Chollyo, Tongni, Pungmun, Haryom. Very busy points of ear-acupuncture are Kan, Bi, Shin, An, Less busy points of it are Shim, Pye, Naebunbe, Mok1, Mok2, Shinmun, Ichom. Useful points of bleeding by needle are Taeyang meridian, Yangmyong meridian, Chono, Chonjong, Paekoe, Sangsong, Chanjuk, Sajukkong, nasal cavity. Useful points of moxibustion are Inchung, Huaryo, Shinchu, Pungmun, Kansu, Shimsu, Kokchi, Kongchoe, Sohae.