• Molecules and Cells
• /
• v.22 no.2
• /
• pp.203-209
• /
• 2006

TBP (TATA-binding protein)-related factor 2 (TRF2) regulates transcription during a nuber of cellular processes. We previously demonstrated that it is localized in the cytoplasm and is translocated to the nucleus by DNA-damaging agents. However, the cytoplasmic localization of TRF2 is controversial. In this study, we reconfirmed its cytoplasmic localization in various ways and examined its nuclear migration. Stresses such as heat shock, redox agents, heavy metals, and osmotic shock did not affect localization whereas genotoxins such as methyl methanesulfonate (MMS), cisplatin, etoposide, and hydroxyurea caused it to migrate to the nucleus. Adriamycin, mitomycin C and ${\gamma}$-rays had no obvious effect. We determined optimal conditions for the nuclear migration. The proportions of cells with nuclei enriched for TRF2 were 25-60% and 5-10% for stressed cells and control cells, respectively. Nuclear translocation was observed after 1 h, 4 h and 12 h for cisplatin, etoposide and MMS and hydroxyurea, respectively. The association of TRF2 with the chromatin and promoter region of the proliferating cell nuclear antigen (PCNA) gene, a putative target of TRF2, was increased by MMS treatment. Thus TRF2 may be involved in genotoxin-induced transcriptional regulation.

• Journal of Korea Foundry Society
• /
• v.19 no.1
• /
• pp.24-32
• /
• 1999

A series of investigations for Austempered Ductile Iron (ADI) castings were carried out by using the specimens with various chemical compositions and heat treatment conditions. The rolling wear characteristics of alloyed austempered ductile irons under an unlubricated dry rolling condition was evaluated by the Amsler type test with 9.09% sliding ratio. Generally, the wear amount was increased with the austempering temperature and decreased when the hardness of the matrix was higher. The alloying elements also influenced the austempering reaction, the microstructure and the mechanical properties. In this study, the mechanical properties (i.e.) ultimate tensile strength (UTS), hardness, elongation) and the wear resistance are analysed to show the relationship between the alloying elements and the austempering temperatures. Mo, Cu and Ni are alloyed individually or in combination. It has been found that when Cu and Ni alloyed individually to a casting, the wear amount is increased than others with elements alloyed in combination. The amount of rolling wear loss was decreased when Mo was alloyed in cast iron, individually or in combination.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.11
• /
• pp.1035-1040
• /
• 2003

High $T_{c}$ superconducting B $i_2$S $r_2$CaC $u_2$ $O_{8+d}$ (BSCCO2212) films were prepared by a metallorganic decomposition (MOD) method. The metal organic solution of BSCCO2212 was spin-coated on MgO (100) substrates at 3000 rpm for 1 min. To achieve a high critical current density, we controlled heat-treatment conditions and atmosphere. The films were annealed at temperature 75$0^{\circ}C$ ∼ 80$0^{\circ}C$ in $O_2$ or air. We obtained c-axis orientated BSCCO thin films on MgO substrates. The annealed sample at 77$0^{\circ}C$ with $O_2$ showed the critical temperature about 77 K and critical current denstity of 1.19 ${\times}$ 10$^{5}$ A/$\textrm{cm}^2$ about 13 K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04a
• /
• pp.59-63
• /
• 2002

The purpose of this paper is to investigate the crystal texture of the 2223 phase and its relationship with PIT processing parameter. Ag-sheathed Bi-2223 multi-filament tapes were prepared by changing rolling reduction ratio. We analysed the degree of texture for 2223 phase after heat-treatment. According to X-ray pole-figure, the texture of the filaments located near surface and center were not so different each other for all rolling conditions. we found a little higher degree of texture for 60% rolling reduction. But its difference is not so high compared with those tapes with a lower rolling reduction ratio. Reaction induced texturing seemed to contribute with a large portion under present condition.

• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.74-80
• /
• 2020

Synthesis of composite powders for the Fe₂O₃-Zn system by mechanical alloying (MA) has been investigated at room temperature. Optimal milling and heat treatment conditions to obtain soft magnetic composite with fine microstructure were investigated by X-ray diffraction, differential scanning calorimetry (DSC) and vibrating sample magnetometer (VSM) measurement. It is found that α-Fe/ZnO composite powders in which ZnO is dispersed in α-Fe matrix can be obtained by MA of Fe₂O₃ with Zn for 4 hours. The change in magnetization and coercivity also reflects the details of the solid-state reduction process of hematite by pure metal of Zn during MA. Densification of the MA powders was performed in a spark plasma sintering (SPS) machine at 900 ~ 1,000 ℃ under 60 MPa. Shrinkage change after SPS of sample MA'ed for 5 hrs was significant above 300 ℃ and gradually increased with increasing temperature up to 800 ℃. X-ray diffraction results show that the average grain size of α-Fe in the α-Fe/ZnO composite sintered at 900 ℃ is in the range of 110 nm.

• Journal of Ginseng Research
• /
• v.13 no.1
• /
• pp.56-59
• /
• 1989

The changes in free sugar composition were investigated with respect to the kinds of dried ginseng for extraction, the various ethanol concentrations used for ginseng extract manufacture and the conditions of heating temperature and time under which the ginseng extract was stored . The results are as follows: 1) The free sugar content of dried ginseng was 6.02-8.02% and the sucrose and maltose content in the free sugar was 70-80%. 2) The free sugar content was 13.82-26.29% in the Sanggunsam (dried ginseng of whole root) extract and it had a tendency to increase with increase in ethanol concentration. In addition, when a higher ethanol concentration was used, the sucrose content was in- creased but the maltose content was decreased. 3) The glucose, sucrose and maltose content in ginseng extract, decreased, in the order, as heating temperature and time were increased. On the other hand the opposite results were neted for xylose and fructose. Keywords Panax ginseng, ginseng extract, Sanggunsam.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.431-435
• /
• 2014

Zinc peroxide nanoparticles ($ZnO_2$ NPs) were prepared by reacting zinc(II) isobutylcarbamate, as an organometallic precursor, with hydrogen peroxide ($H_2O_2$) at $60^{\circ}C$. Polyethylene glycol and polyvinylpyrrolidone were used as stabilizers, which suppressed aggregation of the $ZnO_2$ NPs. Conditions such as concentrations of $H_2O_2$ and the stabilizer were systemically controlled to determine their effect on the formation of nano-sized $ZnO_2$ NPs. The formation of stable $ZnO_2$ NPs was confirmed by UV-vis, Raman spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray diffraction. The TEM images revealed that polyvinylpyrrolidone-stabilized $ZnO_2$ NPs (diameter, 10-30 nm) were well dispersed in the organic solvent. Quite pure ZnO NPs were obtained from the peroxide powder by simple heat treatment of $ZnO_2$. The transition temperature of $170^{\circ}C$ was determined by differential scanning calorimetry.

• Korean Journal of Microbiology
• /
• v.46 no.3
• /
• pp.291-295
• /
• 2010

A novel bacteriocin produced by Streptococcus parauberis Z49 strain was characterized and efficiently extracted from fermented cultures by use of aqueous two-phase systems. The nisin-like bacteriocin, which was active even after a heat treatment at $121^{\circ}C$ for 15 min and in the broad pH range from 2 to 12, showed inhibition of bacterial growth of Micrococcus luteus, Lactobacillus spp., Lactobacillus fermentum, Enterococcus faecium, Listereia monocytogenes, and Pseudomonas fluorescens. Optimal conditions of PEG 600/$Na_2SO_4$ aqueous two-phase systems for the simple and rapid extraction of a novel bacteriocin were determined to be PEG 600 15%, $Na_2SO_4$ 30%, and NaCl 8%, where the bacteriocin was concentrated in PEG layer.

• Journal of Magnetics
• /
• v.8 no.1
• /
• pp.18-23
• /
• 2003

In our previous work, microstructure and magnetic properties of two-phase exchange-coupled $Sm_2Fe_{15}Ga_2C_{x}$/$\alpha$-Fe nanocomposites have been investigated by means of x-ray diffraction, transmission electron microscopy and magnetization measurement. It was found the exchange coupling between the magnetically hard phase $Sm_2Fe_{15}Ga_2C_{x}$ and the magnetically soft one ${\alpha}$-Fe results in an enhancement of the remanence. The sizes of crystallites of both phases are, however much larger than the Block domain-wall width of the magnetically hard phase. This microstructure gives rise to a concave demagnetization curve and consequently reduces the maximum energy Product. In order to improve their magnetic properties, a few Percent of Zr, which may be effective to refine the microstructure through rapid quenching, was introduced into the nanocomposites. The addition of Zr was found to improve the magnetic properties significantly, Under optimum heat-treatment conditions, the remanence, coercivity and maximum energy Product increase from 0.65 T, 0.48 T and 50 kJ/$m^{3}$ for the Zr-free sample to 0.72 T, 0.77 T and 71.6 kJ/$m^{3}$ for the 1 at.% Zr-containing one, respectively, The improvements of magnetic properties are due to the refinement of microstructure by the addition of Zr.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.156-160
• /
• 2001

The effects of TRansformation Induced Plasticity(TRIP) phenomena on the plastic deformation of 0.2C-1.5Si-1.5Mn multiphase steels have been investigated at various heat treatment and stress conditions. In order to estimate the formability, the hole expansion(HE) tests and the tensile tests were carried out. The formability evaluated from the uni-axial tensile tests was quite different from the formability measured from multi-axial HE-tests. Consequently, the formability in the multi-axial stress state decreased due to the extinction of the retained austenite relatively at earlier deformation stage and the production of irregular α' martensite. However, the defects of TRIP-steels were initiated exactly at the boundary between transformed martensite and ferrite matrix regardless of stress state. In addition, new experimental formula is proposed in order to predict the multi-axial formability of the TRIP steels from the results of uniaxial tensile test.