• 열처리공학회지
• /
• 제31권2호
• /
• pp.56-62
• /
• 2018

Many researchers have studied on the precipitation control after solution treatment to improve the damping capacity without decreasing the strength. However, studies on the damping capacity and microstructure changes after deformation in the solid solution strengthening alloys were inadequate, such as the Al-Zn series magnesium alloys. Therefore, in order to investigate the effect of annealing condition on microstructure change and damping a capacity of AZ61 magnesium alloy. In this study, it was confirmed that the microstructure changes affect the damping capacity and hardness when annealed AZ61 alloy. AZ61 magnesium alloy was rolled at $400^{\circ}C$ with rolling reduction of 30%. These specimens were annealed at $350^{\circ}C$ to $450^{\circ}C$ for 30-180 minutes. After annealing, microstructure was observed by using optical microscopy, and damping capacity was measured by using internal friction measurement machine. Hardness was measured by Vickers hardness tester under a condition of 0.3 N. In this study, static recrystallization was observed regardless of the annealing conditions. In addition, uniform equiaxed grain structure was developed by annealing treatment. Hardness is decreased with increasing grain size. This is associated with Hall-Petch equation and static recrystallization. In case of damping capacity, bigger grain size show the larger damping capacity.

• 한국초지조사료학회지
• /
• 제33권1호
• /
• pp.39-44
• /
• 2013

In Korea, wide spread use of whole cottonseed, which is primarily a GMO plant imported from foreign countries and being fed to animals as raw state, has aroused concern that it may disturb the existing ecology of the country unless dispersion of the seed is under proper control. The objective of this study was to elucidate the changes in various nutritive parameters due to heat treatment and to determine the effective condition for removing germination ability of whole cottonseed (WCS). Of the various temperatures applied (76, 78, 80, 85, $100^{\circ}C$/30 min) $85^{\circ}C$ for 30 min was confirmed to be the lowest temperature treatment which resulted in a complete removal of the germination ability of WCS. Therefore, based on the determined temperature condition ($85^{\circ}C$ 30 min) we tried to examine the changes of various nutritional parameters, including nutrient composition, in vitro digestibilities and ruminal protein degradabilities, comparing raw whole cotton seed (RWCS) and heated whole cotton seed (HWCS). Some changes in amino acid composition were observed with heat treatment of WCS, but these were regarded to originate from the variation in plant quality and seed morphology, which are usually affected by different environmental factors during the vegetation period. As for fatty acid composition, no significant differences were observed to occur during heat treatment. However, WCS heated at $85^{\circ}C$ for 30 min in a circulating oven showed a significant decrease (p<0.05) of in situ rumen degradability in both dry matter (DM) and crude protein (CP), as compared to raw WCS. Overall results obtained in the study indicate that the heating condition used in this study, which was proven to be the most appropriate and economic to remove germination ability of WCS, may also improve the nutritional value of the ruminant with regard to reducing its protein degradability within the rumen.

• 대한치과보철학회지
• /
• 제19권1호
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• 농업과학연구
• /
• 제50권4호
• /
• pp.603-616
• /
• 2023

This study was conducted to investigate the productivity, meat quality, blood variables, stress responses, and litter quality of broilers offered feed with different levels of Glycine (Gly) supplementation under heat stress condition. A total of 760 one-day-old Ross 308 broiler males were randomly assigned to one of the four dietary treatment groups: (1) basal diet (control; CON); (2) basal diet + Gly 0.1% (Gly 0.1%); (3) basal diet + Gly 0.2% (Gly 0.2%); and (4) basal diet + Gly 0.3% (Gly 0.3%). The environments for all the treatments groups were maintained according to broiler rearing guidelines from day 1 to day 21, and heat stress condition (32 ± 1℃, 60 ±5%) was created from day 22 to the end. The addition of Gly increased weight gain and affected feed intake (p < 0.05). Gly 0.1% group had higher pH and ferric reducing antioxidant power (FRAP) in the chicken meat and lower heterophil (HE)/lymphocyte (LY) ratio in the blood (p < 0.05). In particular, Gly 0.2% treatment group had lower serum corticosterone level (p < 0.05) than other groups. For jejunum morphology, the addition of Gly 0.2% significantly reduced the depth of the crypts (p < 0.05). However, the addition of Gly did not significantly affect litter quality (p > 0.05). In conclusion, the addition of glycine improved productivity and meat quality, alleviated heat stress, and improved intestinal function. Further studies are needed to determine the optimal level and mechanism of action of the additive when ingested.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.467-475
• /
• 2007

This study was conducted to examine temperature effects on hydrogen production in anaerobic fermentation. 18 batch reactors were operated at mesophilic ($35^{\circ}C$) and thermophilic conditions ($55^{\circ}C$) to achieve maximum hydrogen production in anaerobic fermentation. Optimum hydrogen production conditions were also investigated at each temperature. Different trends were observed regarding pH effects on hydrogen production. This effect was not significant for mesophilic fermentation ($35^{\circ}C$). In this case, pH may not drop to interfere hydrogen production during the test. However, hydrogen production decreased without pH control for thermophilic condition ($55^{\circ}C$). Effects of heat treatment were observed for both fermentation process. Hydrogen production with heat treatment was higher than hydrogen production without heat treatment for both fermentation processes. The amount of produced hydrogen for each substrate concentration with temperature changes showed that more hydrogen was produced at $35^{\circ}C$ than at $55^{\circ}C$.

• 열처리공학회지
• /
• 제31권3호
• /
• pp.120-125
• /
• 2018

The PMMA composited material mixed with alumina studied to find the optimal condition, the adequate ratio of mixing, for the associated mechanical properties such as anti-corrosive, weatherproof performance. The 80% of hardness and 52% of scratch coefficient improved according to increasing ratio of alumina, which is mostly 3 times higher than that of pure PMMA, on other hand 16% of tensile strength and 35% of flexural strength has lost while alumina was adding in. The most proper ratio, having the best availability in substantial production, of composite between pure PMMA and alumina is determined as 93 wt. % vs 7 wt. %. Results of related five properties had estimated by using of a pentagram.

• 펄프종이기술
• /
• 제34권1호
• /
• pp.1-6
• /
• 2002

Alkaline sizing characteristics of TMP (thermomechanical pulp) handsheets with AKD (alkylketene dimer) were studied under various conditions. The sizing degree of TMP handsheet was much lower than that of chemical pulp. Especially, the sized TMP handsheet dried at $20^{\circ}C$ showed no sizing features, but sizing degree of TMP handsheet was clearly Increased by heat treatment at $105^{\circ}C$. The sizing effect of TMP was also improved by addition of $CaCO_3$, but it was not affected by pH. Therefore, sizing effect of TMP with AKD can be improved to some extent by controlling stock condition and heat treatment of handsheet.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.930-933
• /
• 2001

Titanium Alloys used in this experiment has an good corrosion resistance and specific strength, and is the new material developed for medical supplies living goods. In this study the rolled titanium alloy is done by annealing, solution heat-treatment and aging and then is worked by wire EDM. With changing the process conditions, the process properties of surface hardness, surface roughness, shape of process surface and the analysis of ingredients are measured through experiment repeating main cut and finish cut. It is confirmed to gain good measure values as increasing the number of processing of wire EDM. In this experiment the phenomena of processing is studied and the appropriate process condition is proposed.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1215-1222
• /
• 1999

It is advantageous to use an NDE method to assess the mechanical properties of materials since the conventional method is time-consuming and sometimes requires cutting of sample from the material/component. This paper shows that the ultrasonic and the Barkhausen noise(BHN) methods can be used to accurately characterize forged reactor vessels. The attenuation coefficient of the ultrasonic wave was changed with heat treatment temperature and condition[as-quenched, tempered, PWHT]. The RMS[root mean square] voltage of Barkhausen noise depended on heat treatment temperature and conditions. The fracture appearance transition temperature(FATT) can be predicted using nondestructive evaluation methods.

• 한국기계가공학회지
• /
• 제19권4호
• /
• pp.16-23
• /
• 2020

An electric vehicle operates at high currents and requires real-time monitoring of the entire system for ensuring efficiency and safety of the vehicle. Current sensors are applied to drive the motors, inverters, and battery control systems, and are the key components to ensure constant monitoring of the magnitude and waveforms of the operating current. In this study, a heat treatment process condition to influence the performance of Permalloy current sensors was developed; the correlation between the output capacity, low-temperature characteristics, and high-temperature characteristics of the current sensor was studied; and the process was optimized to meet the required output accuracy and temperature characteristics.