• Title/Summary/Keyword: Heat recovery system

Search Result 455, Processing Time 0.027 seconds

Characterization of Low-Temperature Pyrolysis and Separation of Cr, Cu and As Compounds of CCA-treated Wood (CCA (Chromated Copper Arsenate) 처리 목재의 저온 열분해와 CCA 유효 성분분리 특성)

  • Lim, Kie-Pyo;Lee, Jong-Tak;Bum, Jung-Won
    • Journal of the Korean Wood Science and Technology
    • /
    • v.35 no.1
    • /
    • pp.73-80
    • /
    • 2007
  • This study was carried out to separate the heavy toxic metals in eco-building materials by low-temperature pyrolysis, especially arsenic (As) compounds in CCA wood preservative as a solid in char. The pyrolysis was carried out to heat the CCA-treated Hemlock at $280^{\circ}C$, $300^{\circ}C$, $320^{\circ}C$, and $340^{\circ}C$ for 60 mins. Laboratory scale pyrolyzer composed of [preheater$\rightarrow$pyrolyzer$\rightarrow$1st water scrubber$\rightarrow$2nd bubbling flask with 1% $HNO_3$ solution$\rightarrow$vent], and was operated to absorb the volatile metal compound particulates at the primary water scrubber and the secondary nitric acid bubbling flask with cooling condenser of $4^{\circ}C$ under nitrogen stream of 20 mL/min flow rate. And the contents of copper, chromium and arsenic compounds in its pyrolysis such as carbonized CCA treated wood, 1st washing and 2nd washing liquors as well as its raw materials, were determined using ICP-AES. The results are as follows : 1. The yield of char in low-temperature pyrolysis reached about 50 percentage similar to the result of common pyrolytic process. 2. The higher the pyrolytic temperature was, the more the volatiles of CCA, and in particular, the arsenic compounds were to be further more volatile above $320^{\circ}C$, even though the more repetitive and sequential monitorings were necessary. 3. More than 85 percentage of CCA in CCA-treated wood was left in char in such low-temperature pyrolytic condition at $300^{\circ}C$. 4. Washing system for absorption of volatile CCA in this experiment required much more contacting time between volatile gases and water to prevent the loss of CCA compounds, especially the loss of arsenic compound. 5. Therefore, more complete recovery of CCA components in CCA-treated wood required the lower temperature than $320^{\circ}C$, and the longer contacting time of volatile gases and water needed the special washing and recovery system to separate the toxic and volatile arsenic compounds in vent gases.

Stress and Fatigue Evaluation of Distributor for Heat Recovery Steam Generator in Combined Cycle Power Plant (복합발전플랜트 배열회수보일러 분배기의 응력 및 피로 평가)

  • Lee, Boo-Youn
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.8
    • /
    • pp.44-54
    • /
    • 2018
  • Stress and fatigue of the distributor, an equipment of the high-pressure evaporator for the HRSG, were evaluated according to ASME Boiler & Pressure Vessel Code Section VIII Division 2. First, from the results of the piping system analysis model, reaction forces of the tubes connected to the distributor were derived and used as the nozzle load applied to the detailed analysis model of the distributor afterward. Next, the detailed model to analyze the distributor was constructed, the distributor being statically analyzed for the design condition with the steam pressure and the nozzle load. As a result, the maximum stress occurred at the bore of the horizontal nozzle, and the primary membrane stress at the shell and nozzle was found to be less than the allowable. Next, for the transient operating conditions given for the distributor, thermal analysis was performed and the structural analysis was carried out with the steam pressure, nozzle load, and thermal load. Under the transient conditions, the maximum stress occurred at the vertical downcomer nozzle, and of which fatigue life was evaluated. As a result, the cumulative usage factor was less than the allowable and hence the distributor was found to be safe from fatigue failure.

The Hybrid Fault Tolerant Technique for Embedded System (임베디드 시스템을 위한 복합 결함 허용 기법)

  • Kook, Joong-Jin;Hong, Ji-Man
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2007.06b
    • /
    • pp.273-278
    • /
    • 2007
  • 검사점 및 복구 도구(Checkpointing & Recovery Facility)를 이용하여 임베디드 시스템에서 결함 허용(Fault Tolerance) 기법을 적용할 경우 쓰기 작업의 오버헤드로 인해 실용성이 크게 떨어지게 된다. 실시간 운영체제와 함께 어떠한 한계 상황에서 결함 허용 및 복구 도구가 오히려 시스템의 성능을 저하시키는 요인으로 작용하게 되면 이는 결국 쓸모없는 도구가 되어 사용되지 않을 것이다. 따라서 프로세스의 복구를 위해 저장하는 프로세스 이미지의 기록에 소요되는 시간을 크게 낮추어야만 비로소 검사점 도구가 그 진가를 발휘하게 될 수 있다. 본 논문에서는 NVSRAM(Non Volatile SRAM)을 검사점 및 복구 도구의 저장 장치로 활용함으로써 기존의 검사점 도구에서 성능을 저하시키는 주원인이었던 검사점 기록의 오버헤드를 개선하기 위한 연구를 수행하였다. 검사점 기록 시간을 줄이기 위한 방법으로 주 메모리에 저장된 프로세스의 복구와 관련된 데이터를 SRAM 특성을 갖는 비휘발성 저장 장치인 NVSRAM에 저장하여 디스크 접근에 소요되는 시간을 최소화시킴으로써 임베디드 시스템에서 실용적으로 사용 가능한 검사점 도구를 구현하였고, 이러한 연구의 결과를 검증하기 위해 기존 시스템에서 저장 장치로 사용되던 플래시 메모리, 주 메모리, 원격 메모리를 사용하는 경우의 성능과 NVSRAM을 활용할 때의 성능을 비교해 보았다. 본 연구에서 제안하는 결함 허용 도구는 실제 시스템에 적용하여 효과적인 성능을 발휘할 수 있을 것이며, 차세대 메모리를 이용한 결함 허용 도구의 연구에 기여를 할 수 있을 것으로 기대된다.ate첨가배지(添加培地)에서 가장 저조(低調)하였다. vitamin중(中)에서는 niacin과 thiamine첨가배지(添加培地)에서 근소(僅少)한 증가(增加)를 나타내었다.소시켜 항이뇨 및 Na 배설 감소를 초래하는 작용과, 둘째는 신경 경로를 통하지 않고, 아마도 humoral factor를 통하여 신세뇨관에서 Na 재흡수를 억제하는 작용이 복합적으로 나타내는 것을 알 수 있었다.으로 초래되는 복합적인 기전으로 추정되었다., 소형과와 기형과는 S-3에서 많이 나왔다. 이상 연구결과에서 입도분포가 1.2-5mm인 것이 바람직한 것으로 나타났다.omopolysaccharides로 확인되었다. EPS 생성량이 가장 좋은 Leu. kimchii GJ2의 평균 분자량은 360,606 Da이었으며, 나머지 두 균주에 대해서는 생성 EPS 형태와 점도의 차이로 미루어 보아 생성 EPS의 분자구조와 분자량이 서로 다른 것으로 판단하였다.TEX>개로 통계학적으로 유의한 차이가 없었다. Heat shock protein-70 (HSP70)과 neuronal nitric oxide synthase (nNOS)에 대한 면역조직화학검사에서 실험군 Cs2군의 신경세포가 대조군 12군에 비해 HSP70과 nNOS의 과발현을 보였으며, 이는 통계학적으로 유의한 차이를 보였다(p<0.05). nNOS와 HSP70의 발현은 강한 연관성을 보였고(상관계수 0.91, p=0.000), nNOS를 발현하는 세포가 동시에 HSP70도 발현함을 확인할 수 있었다. 결론: 우리는 cyclosporin A가 토끼의 25분간의 척수허혈에 대해 척수보호 효과가 있었으며 이는 HSP70의

  • PDF

SPECTROPHOTOMETRIC ANALYSIS ON THE SEALING EFFECT OF ULTRASONIC OBTURATION OF THE ROOT CANAL (초음파(超音波) 근관충진법(根管充眞法)의 폐쇄효과(閉鎖效果)에 관(關)한 분광광도계(分光光度界) 측정(測定))

  • Kim, Yang-Lag
    • Restorative Dentistry and Endodontics
    • /
    • v.15 no.2
    • /
    • pp.46-57
    • /
    • 1990
  • The purpose of this study was to spectrophotometrically investigate the sealing effect of the ultrasonic canal obturation with softened gutta-percha utilizing an endosonic plugger by means of ultrasonic vibrations and heat. The 120 extracted human central and lateral incisors with single root were randomly selected, and the root canals were instrumented up to size #60 file by conventional method. The prepared canals were obtruated with gutta-percha by lateral condensation method, McSpadden technique and ultrasonic condensation method, with or without sealer. All specimens were immersed in 2% methylene blue in an incubator at $37^{\circ}C$ for 10 days. The teeth were then dissolved in 5ml of 60% nitric acid solution and the dye present within the root canal system was returned to solution. The leakage of dye was quantitatively measured via spectrophotometric method. The obtained data statistically evaluated usint two-way ANOVA and Student's t-test. The results were as follows : No statistically significant difference in leakage was observed between the lateral condensation method and ultrasonic condensation method, with and without sealer. When sealer was used or not, McSpadden technique showed significantly greater leakage than lateral or ultrasonic condensation method. Statistical analysis of the data indicated that the canals obturated in conjunction with sealer demonstrated less dye leakage than the canals obturated without sealer(p<0.01), except McSpadden technique. The ultrasonic condensation method appeared comparable sealing ability to the lateral condensation method.

  • PDF

Evaluation of Selective Media for Isolation of Staphylococcus aureus from Agricultural Products (농산물 중 Staphylococcus aureus의 분리를 위한 선택배지 평가)

  • Kim, Se-Ri;Lee, Seo-Hyun;Seo, Min-Kyoung;Kim, Won-Il;Park, Kyeong-Hun;Yun, Hye-Jeong;Yoon, Yo-Han;Yoo, Soon-Young;Ryu, Kyoung-Yul;Yun, Jong-Chul;Kim, Byung-Seok
    • Journal of Food Hygiene and Safety
    • /
    • v.27 no.2
    • /
    • pp.169-175
    • /
    • 2012
  • Five kinds of selective media, such as mannitol salt agar (MSA), Baird-Parker agar (BPA), Baird-Parker supplemented with rabbit plasma fibrinogen (BPA+RPF), CHROMagar Staphylococcus aureus (CSA), and Petrifilm Staph Express count system (Petrifilm), were compared to recommend the optimum selective media for isolation of Staphylococcus aureus from agricultural products. Seventy four target and non target bacteria were inoculated on five selective media to analyze sensitivity and specificity. In the recovery test of injured S. aureus cells, S. aureus was exposed to acid (1% lactic acid for 10 min), heat ($60^{\circ}C$ for 90s), and cold ($-20^{\circ}C$ for 1h) conditions. And artificially contaminated agricultural products (iceberg lettuce, green pepper, and cherry tomato) was enumerated on five selective media. The sensitivity of BPA+RPF, CSA, Petrifilm, MSA, and BPA were 100%, 100%, 100%, 90.5%, 90.5%, respectively. In addition, the specificity of BPA+RPF, CSA, MSA, BPA and Petrifilm were 100%, 100%, 84.6%, 75.0%, 67.3%, respectively. However, no difference among five selective media was observed in recovery on injured S. aureus cell and enumeration from agricultural products. This results suggest that BPA+RPF and CSA are the optimum media for detection of S. aureus from agricultural products.