• 패션비즈니스
• /
• 제19권4호
• /
• pp.92-108
• /
• 2015

This study aimed at developing a down jacket prototype that utilized sunlight as an alternative energy source with no air pollution. The jacket is filled with flexible solar panels and has a heat-generating function and LED function. In this study, three smart down jacket prototypes were developed, and the jacket's capabilities were demonstrated through the thermal effect on the performance test. The typical output voltage of the flexible solar panels was 6.4V. By connecting the 2 solar cell modules in series, the final output voltage was 12.8V. A battery charge regulator module was used the KA 7809 (TO-220) of 9V. Three heating pads were to be inserted into the belly of the jacket as direct thermal heating elements, and the LED module was configured, separated by a flash and an indicator. The smart down jacket was designed to prevent damage to the down pack without the individual devices' interfering with the human body's motion. Because this study provides insulation from extreme cold with a purpose, the jacket was tested for heat insulation properties of non-heating, heating on the back, heating on the abdomen, and heating on both the back and abdomen in a sitting posture in a static state. Thermal property analysis results from examining the average skin temperature, core temperature, and the temperature and humidity within clothing showed, that placing a heating element in one place was more effective than distributing the heating elements in different locations. Heating on the back was the most effective for maintaining optimal skin temperature, core temperature, and humidity, whereas heating on the abdomen was not effective for maintaining optimal skin temperature, core temperature, or humidity within clothing because of the gap between the jacket and the body.

• 한국응용과학기술학회지
• /
• 제38권5호
• /
• pp.1273-1281
• /
• 2021

본 연구의 목적은 율피 색소로 1제형 산성 염모제를 제조하여 1제형 산성 염모제의 단점인 색상의 발색력을 높이고 오랜 지속력을 살펴보는 것이다. 이를 위해, 분광측색계를 이용하여 염색력을 측정하고, 모발의 퇴색 정도를 살펴보기 위해 광학밀도(O.D.) 값을 측정하였으며, 모발의 탄력성은 인장강도를 측정하여 분석하였다. 각 레벨의 모발 시료에 대해 다른 방치 시간과 처리 방법을 적용한 결과를 비교한 결과, 20분간 열처리한 실험군이 가장 높은 염색력을 나타내었다. 이어 자연방치 40분, 열처리 10분, 자연방치 20분 순으로 확인되었다. 그리고 10레벨까지 올라갈수록 색상 표현이 높아지는 것을 확인하였다. 그러나 10레벨에서는 3일 후에도 약간의 수분 손실이 발생하고 인장강도도 낮은 것을 확인하였다. 이러한 결과는 앞으로 뷰티 업계가 다양한 천연염색 성분이 함유된 1제형 산성 염모제를 대중화하여 현대인의 웰빙과 건강한 심신을 유지하는 데 도움을 줄 것을 시사한다.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.402-408
• /
• 2017

PURPOSE. The goal of this study was to compare the adhesion of Candida albicans to the surfaces of CAD/CAM and conventionally fabricated complete denture bases. MATERIALS AND METHODS. Twenty discs of acrylic resin poly (methyl methacrylate) were fabricated with CAD/CAM and conventional procedures (heat-polymerized acrylic resin). The specimens were divided into two groups: 10 discs were fabricated using the CAD/CAM procedure (Wieland Digital Denture Ivoclar Vivadent), and 10 discs were fabricated using a conventional flasking and pressure-pack technique. Candida colonization was performed on all the specimens using four Candida albicans isolates. The difference in Candida albicans adhesion on the discs was evaluated. The number of adherent yeast cells was calculated by the colony-forming units (CFU) and by Fluorescence microscopy. RESULTS. There was a significant difference in the adhesion of Candida albicans to the complete denture bases created with CAD/CAM and the adhesion to those created with the conventional procedure. The CAD/CAM denture bases exhibited less adhesion of Candida albicans than did the denture bases created with the conventional procedure (P<.05). CONCLUSION. The CAD/CAM procedure for fabricating complete dentures showed promising potential for reducing the adherence of Candida to the denture base surface. Clinical Implications. Complete dentures made with the CAD/CAM procedure might decrease the incidence of denture stomatitis compared with conventional dentures.

• 한국식품저장유통학회지
• /
• 제8권1호
• /
• pp.74-78
• /
• 2001

밤호박를 이용한 가공식품을 개발하여 안정적인 내수기반을 마련하고자 밤호박과 몇가지 부재료를 이용하여 즉석죽을 제조한 결과는 다음과 같다. 밤호박 즉석죽은 증숙 밤호박 78.4%, 가열 옥수수 9.2%, 볶은 양파 4,6%, 삶은 통팥 6.9%, 설탕 0.6%, 소금 0.3% 비율로 배합했을 때 제품의 관능적 품질이 양호하였다. 즉석식품으로서 저장성을 확보하기 위해 12$0^{\circ}C$에서 20~60분간 열처리한 결과 제품의 색도는 낮아졌으나 산도와 점도는 증가하는 경향이었다. 제품의 열처리 효과를 검토하기 위해 37$^{\circ}C$에서 5일간 저장한 후 제품의 기호도를 조사하였을 때 12$0^{\circ}C$에서 30~40분 처리가 양호한 결과를 나타내었다.

• 한국한의학연구원논문집
• /
• 제2권1호
• /
• pp.454-484
• /
• 1996

There are many factors to evoke pain, for example cold, heat, seven emotion, digestion, fatigue, venemous worms, deficiency of blood etc., and its pathogenesis is complicated. Treatments for pain in oriental medicine are as follows. 1. Pharmacotherapy is a method to treat pain by different effects of herbal medicine, for example, regulating vital energy, activating blood circulation, eliminating phlegm, and dispelling the cold evil etc. 2. Acupuncture and moxibustion therapy is a kind of external application, it has a distinct effect in relieving pain. Recently its operation method has been more developed, so new acupuncture therapies are used in clinics. There are electroacupuncture, auricular acupuncture and injection of drugs at an acupuncture points etc. 3. Oriental physiotherapy is a treatment method to stimulate acupuncture points and meridians. (1) Hot pack, Paraffin bath, Microwave, Ultrasound, Short wave, Infra-red etc. are used to treat cold syndrome by dispersing cold by warming the channels. (2) E.S.T., I.C.T., T.E.N.S., S.S.P., cupping treatment etc. are used to treat disorders of vital energy. (3) Health ion, Carbon, T.D.P., etc are used to treat conic and deficiency syndrome.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1166-1168
• /
• 2003

In most power electronic applications, the AC power input provided by the electronic utility needs to first converted to a DC voltage. Such conversion is accomplished by a diode rectifier due to its circuit simplicity and low cost. However, since diode rectifiers have some intrinsic problems such as low power factor and high harmonic distortion, a wide use of such rectifiers may cause noises, malfunction and heat damage in both electrical power systems and electrical machinery systems. This paper proposes soft switched three-phase single switch boost-type converter. The proposed circuit can perform Zero Voltage Switched(ZVS) without using any current and voltage sensors. For this circuit, both simulation and experiments have been performed. The results not only confirmed the ZVS but also indicated that, compared to the conventional hard switched converter, the prosed circuit can improve the efficiency as much as 1.7 to 4.7[%] while keeping the same high power factor and small harmonic distortion in their AC input.

• 한국지열·수열에너지학회논문집
• /
• 제17권4호
• /
• pp.46-58
• /
• 2021

As accidents with thermal runaway (TR) of lithium-ion batteries occur sporadically, the safety concern is the main obstacle that hinders the large-scale applications of lithium ion batteries. In most accidents, the TR of a single cell occurred first, and then dissipated the heat to the surroundings and triggered the TR of adjacent cells, resulting in TR propagation. Therefore, it is important to understand the mechanism of TR propagation and determine the key parameters during TR propagation in a battery pack. In this study, we performed a numerical analysis on the thermal runaway phenomenon by cathode active materials and appearance sizes in cylindrical lithium-ion batteries using a two-dimensional analysis model. The model results showed that the TR propagation of 21700 type cells (21 mm diameter, 70 mm height) occurs more rapidly than 46800 type cells (46 mm diameter, 80 mm height) and the LFP cell has higher thermal safety than the NCM cell. Especially, we found that the effect of the separator on the occurrence of TR is negligible.

• 한국염색가공학회지
• /
• 제34권3호
• /
• pp.197-206
• /
• 2022

The purpose of this study was to confirm the optimal spinning conditions for PLA (Polylactic acid) as a fiber forming polymer. According to the melt spinning test results of PLA, the optimal spinning temperature was 258℃. However, it needs to note that relatively high pack pressure was required for spinning at 258℃. At an elevated temperature, 262℃, mono filament was broken easily due to hydrolysis of PLA at a higher temperature. In case of fiber strength, it was confirmed that the draw ratios of 2.7 to 3.3 were optimal for maximum strength of melt spun PLA. Above the draw ratio, 3.3, the strength of the PLA fibers was lowered. It was presumed that cleavage of the PLA polymer chain over maximum elongation. The heat setting temperature of GR (Godet roller) showed that the maximum strength of the PLA fibers was revealed around 100℃. The degree of crystallinity and the strength of the PLA fibers were decreased above 100℃. The optimal take-up speed (Spinning speed) was around 4,000m/min. Thermal analysis of PLA showed 170℃ and 57℃ as Tm (melting temperature) and Tg (glass transition temperature), respectively.

• 공업화학
• /
• 제18권3호
• /
• pp.227-233
• /
• 2007

탄소/탄소 복합재는 우수한 열충격 저항성, 낮은 밀도뿐만 아니라, 초고온에서도 높은 강성과 강도를 가지는 독특한 소재이다. 그러나, 탄소/탄소 복합재의 적용에 있어서 심각한 결함이 있는데, 높은 온도에서 산화되는 환경에서는 취약한 산화 저항을 나타낸다는 것이다. 탄화규소 코팅은 탄소재의 산화를 보호하는데 이용된다. 본 연구에서는 4방향성 탄소/탄소 복합재의 삭마 거동을 시험하기 위해 액체연료 로켓 엔진을 사용하여 연소시험을 하였다. 탄소/탄소 복합재는 기지 전구체로 석탄 핏치를 사용하였고, $2300^{\circ}C$에서 열처리 하였다. 고밀도화 과정을 반복하여 시편의 밀도는 $1.903g/cm^3$에 달했다. 4방향성 탄소/탄소 복합재를 노즐 형태로 가공한 후, 산화 저항성을 개선하기 위하여 pack-cementation 방법으로 노즐 표면에 탄화규소를 코팅하였다. 탄화규소로 코팅된 노즐의 삭마 특성은 연료와 산소의 비율에 따라 측정하였다. 또한 연소시험 후 노즐의 삭마된 현상은 주사전자현미경으로 관찰하고, 삭마 메커니즘을 논의하였다.

• 한국결정성장학회지
• /
• 제29권6호
• /
• pp.283-293
• /
• 2019

우주공간, 고에너지 플라즈마, 방사선 조사 환경과 같은 극한환경에서의 응용 분야가 증가함에 따라 더 높은 용융점 및 기계적 강도, 열전도도의 향상을 필요로 하는 재료에 대한 수요가 계속적으로 증가하고 있다. 이에 따라 대표적인 내열 소재인 탄소-탄소 복합체의 내산화/내삭마 특성을 개선하기 위하여 초고온 세라믹스를 이용하는 방법에 대하여 리뷰하였다. 초고온 세라믹스를 합성하는 가장 간단한 방법인 CVD 코팅법과 다른 코팅법인 pack cementation, 용사법의 장단점을 서로 비교하였다. 복잡한 형상의 C/C 복합체에 CVD 코팅법을 적용하기 위한 방법으로 열역학 계산 및 CFD 시뮬레이션의 활용 가능성을 제안하였다. 또한 이런 방법을 통하여 제작한 TaC/SiC 이중 층 코팅과 TaC/SiC 다중 층 코팅의 내산화 특성을 비교한 결과, 다중 층 코팅을 적용하였을 때 더 뛰어난 내산화성을 보이는 것을 확인하였다.