• 한국수산과학회지
• /
• 제33권5호
• /
• pp.399-402
• /
• 2000

일반적인 수산물 통조림의 내용물 속에는 물, 기름 및 조미액즙 등 packing medium이 들어있다. 본 연구에서는 새우, 꽁치 및 굴을 원료로 건조 및 조미 후 packing medium이 없는 새로운 형태의 조미통조림을 제조하고 이들 제품의 진공도별 (15, 30, 45 및 60cmHg) 열침투 특성을 조사할 목적으로 본 연구를 수행하였다. 진공도별 제품의 열침투 속도는 진공도가 높을수록 빠르게 나타났으며 동일시간 살균했을 때 진공도가 높을수록 Fo치가 높게 나타났다. 한편 상법으로 제조된 water pack과 본 시험에서 제조한 조미통조림과의 열침투 속도를 비교했을 때 새우와 꽁치 조미통조림의 경우는 진공도 15cmHg 이상에서는 열침투 속도가 water pack 제품보다는 빠르게 나타났고 굴 제품의 경우는 water pack 제품이 30cmHg 이상에서 열침투 속도가 빠르게 나타났다. 따라서 packing medium이 없는 조미 통조림의 경우 진공도 30cmHg 이상이 되면 기존의 water pack 제품보다 열침투 속도가 빠르다는 사실이 관찰되었다.

• 대한물리의학회지
• /
• 제4권3호
• /
• pp.149-156
• /
• 2009

Purpose：The hamstring muscle has an important role in standing, walking and other functions related to daily living. Most people with Cerebral Palsy(CP) have muscle tightness, especially in the hamstring, which may cause abnormal alignment in the lower extremities. To investigate an effective treatment for hamstring muscle tightness by observing the effects of heat pack or Soft tissue mobilization(STM) on hamstring muscles. Methods：Thirteen-two volunteers with CP aged between 9 and 13 years($M\pmSD$: $11\pm1.46$), were recruited and divided into four groups of four: (1) the STM for people with Spastic CP group, (2) the heat pack(HP) for people with Spastic CP group, (3) the STM for people with Mixd CP group, and (4) the heat pack for people with Mixed CP group. All received treatment three times per week for six weeks. A inclinometer was used to measure for hip flexion & knee extension joint range motion(ROM). Results：The ROM of hip flexion & knee extension were improved at the STM and HP for people with Spastic CP groups. The ROM and hip flexion were improved at the STM and HP for people with Mixed CP groups. The amount of increase ROM are differenced by the types of CP. Conculusion：STM and heat pack, both are effective for people with CP especially for Spastic CP.

• Journal of Oral Medicine and Pain
• /
• 제31권1호
• /
• pp.47-57
• /
• 2006

본 연구는, 표면열요법 중에서 널리 쓰이는 습열 요법(온습포)과 건열 요법(적외선 램프)이 전이부 표층부 혈류량과 피부온도에 미치는 영향을 평가하기 위해, 건강한 성인 20명(남 10명, 여 10명)을 대상으로 laser doppler flowmetry를 사용하여 표면열요법 적용전후의 피부 온도와 표층부 혈류량을 측정함으로써 다음과 같은 결과를 얻었다. 1. 온습포와 적외선 램프 모두에서 표층부 혈류량과 피부 온도는 적용전보다 적용후에 유의하게 증가하였다. 2. 표면열 요법 적용 후 표면 온도는 표면열 요법 적용 직후에, 표층부 혈류량은 표면열 요법 적용 4분 후에 가장 높게 나타났으며, 그 이후 꾸준히 감소하였다. 3. 표면열 요법 적용 후 증가된 표층부 혈류량은 적외선 램프에 비해 온습포에서 더 오랫동안 유지되었다. 4. 표면열 요법 적용 후 증가된 피부 온도는 두 요법 모두 60분간 유의성있게 증가된 상태로 유지되었으나, 적외선 램프 적용 후 증가된 피부 온도는 온습포에 비해 급격히 감소하였다. 5. 적외선 램프 적용 직후 여성이 남성보다 표층부 혈류량의 증가가 컸으나, 그 이후 차이가 점차 감소하여 20분 이후에는 성별에 따른 차이가 없었다.

• 전자공학회논문지SC
• /
• 제40권3호
• /
• pp.172-180
• /
• 2003

본 연구에서는 자기공명영상(MRI)에서 수소 원자핵의 공명주파수(PRF) 방법을 기반으로 인체 종아리 근육 외부의 열원에 의해 근육 내부로 열원이 전달되는 과정을 비침습적으로 관찰하는 방법을 제시한다. 열전달과정을 온도 변화로 측정하였는데 온도 영상의 안정성 및 보정 실험은 phantom을 이용하였고 온도의 변화는 phantom과 인체 모두에서 측정하였다. Phantom 실험은 agarose gel을 중탕하여 약 50℃까지 가열시킨 후 1시간의 냉각과정 동안 매 3분마다 데이터를 획득하였다. 인체 실험에서는 지원자의 종아리(the calf)에 hot pack을 이용하여 열을 전달하였다. Hot pack을 발열시키기 전에 기준 데이터를 1번 획득하고, 발열시킨 후부터 매 2분마다 30분 동안 데이터를 획득하였다. 획득된 영상 데이터는 위상차 영상으로 재구성된 다음 각 ROI에서의 평균 위상차를 관측하였다. 온도를 34.2∼50.2℃의 범위에서 변화시켰을 때 phantom의 위상차는 온도 변화에 대해 선형적으로 변하였다. 이 범위에서 측정된 온도의 해상도는 0.0457 radian/℃(0.0038 ppm/℃)였다. 인체 실험에서는 각 영상에서 hot pack과 가까운 위치의 평균 위상차가 hot pack과 먼 위치의 평균 위상차보다 작은 값을 나타냈다 이를 통해 같은 영상 단면에서도 열원(heat source)과의 거리에 따라서 온도 변화가 다르게 나타나는 것을 관찰할 수 있었다. 본 연구를 통해 PRF방법을 이용하여 MRI에서도 비침습적으로 인체 내부의 열전달과정을 관측하였고 이로서 온열치료 시 MRI가 임상적 이용 가능성이 있음을 확인하였다.

• 국제물리치료학회지
• /
• 제4권1호
• /
• pp.505-509
• /
• 2013

This study has investigated the effect of isometric contractile force and muscle activity applying sperficial heat according to the time from the biceps brachii muscle. In this study, 20 university students participants without musculoskeletal and neurological disorders. By applying a hot pack 5min, 10min, 20min and 30min respectively. After that measurement are skin temperature, contractile force and muscle activity. Skin temperature of the hot 5 min applied that rapidly changing. Increasing the time it takes to apply a variance has been reduced(p<.001). Isometric contractile force was not statistically significant but highest when applying the hot pack 5 minutes and lowest when applying the hot pack 30 minutes(p<.001). Muscle activity and median frequency was highest when applying the hot pack 5 minutes. To analyze the above results, it was found that isometric contractile force and muscle activity changed according to the applying time. These result lead us to the conclusion that this study will be more evidence for changes in muscle contraction to apply hot pack on clinic.

• 전력전자학회논문지
• /
• 제23권6호
• /
• pp.408-414
• /
• 2018

Given that lithium-ion batteries are expected to be used as power sources for electric and hybrid vehicles, thermodynamics experimentation and prediction based on experimental data were performed. Thermal, electrochemical, and electrochemical/electrical-thermal models were used for accurate battery modeling. Various applications of different battery packs were demonstrated, and thermal analysis was performed using the same experimental conditions for square and rectangular battery packs. Accurate thermal analysis for a single cell should be prioritized to determine the thermal behavior of the battery pack. The energy balance equation, which contains heat generation and heat transfer factors, defines the thermal behavior of the battery pack. By comparing battery packs of different shapes tested under the same condition, this study revealed that the rectangular battery pack is superior to the square battery pack in terms of the maximum temperature of inner cells and temperature variation between cells.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.3-11
• /
• 1995

A theoretical model which combines gaseous transport and solid state diffusion was used to study aluminide coating process by pack cementation. The aluminide coatings were applied in the high activity pack containing $NH_4Cl$ activator with Ni substrate under argon atmosphere. On the basis of the process conditions, the suggested model allows the surface composition, the growth rate of coating layers and the aluminium concentration profiles in coatings to be calculated. In the case of $NH_4Cl$ activator, careful consideration was required in the analysis, because activator contains nitrogen and hydrogen as well as halogen element to activate the pack. A good agreement is obtained between the theoretical predictions and the experimental results.

• 반도체디스플레이기술학회지
• /
• 제13권1호
• /
• pp.101-108
• /
• 2014

The battery pack in this research consists of dozens of a small battery for energy storage. And this battery pack charges and discharges repeatedly at high capacity (25 ~ 50 V, 25 ~ 100 A). The high temperature which can be generated in this process has a bad effect to the lifetime and efficiency of batteries. Moreover these factors are related with maintenance cost. Therefore, we need to assess the thermal performance of the battery pack in advance using the experimental or numerical analysis. In this research, we analyzed voltage and surface temperature of one cell battery to calculate heat transfer using the numerical analysis. And the temperature of the battery surfaces and inside of the pack was also analyzed. As a result, we found out the appropriate pack structure which stacked five modules.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.489-497
• /
• 2020

The Li-ion battery is considered to be one of the potential power sources for electric vehicles. In fact, the efficiency, reliability, and cycle life of Li-ion batteries are highly influenced by their thermal conditions. Therefore, a novel thermal management system is highly required to simultaneously achieve high performance and long life of the battery pack. Basically, thermal modeling is a key issue for the novel thermal management of Li-ion battery systems. In this paper, as a basic study for battery thermal modeling, temperature distributions inside the simple Li-ion battery pack (comprises of nine 18650 Li-ion batteries) under a 1C discharging condition were investigated using measurement and computational fluid dynamics (CFD) simulation approaches. The heat flux boundary conditions of battery cells for the CFD thermal analysis of battery pack were provided by the measurement of single battery cell temperature. The temperature distribution inside the battery pack were compared at six monitoring locations. Results show that the accurate estimation of heat flux at the surface of single cylindrical battery is paramount to the prediction of temperature distributions inside the Li-ion battery under various discharging conditions (C-rates). It is considered that the research approach for the estimation of temperature distribution used in this study can be used as a basic tool to understand the thermal behavior of Li-ion battery pack for the construction of effective battery thermal management systems.

• 한국전문물리치료학회지
• /
• 제3권2호
• /
• pp.19-28
• /
• 1996

The purpose of this study was to asses and compare the effects of superficial heating on the pain threshold at limbs in healthy adult and adult hemiplegia. We used hot pack for superficial heat and applied to healthy adult(n=12) and adult hemiplegia(n=12) on lumbar region. Pain treshold was quantatively measured by an electrical stimulator and measured before hot pack application, immediatly and post 30 minutes after hot pack application on the distal parts of limbs(styloid process of radius, medial malleoulus of tibia). The results were as follows 1) A statically significant defference in pain treshold were not found at limbs of healthy adult and adult hemiplegia that have an affected side and a non-affected side before hot pack application, immediatly and post 30 minutes after hot pack apllication(p>0.05). 2) In comparance of pain threshold of upper and lower limbs in the all subjects, pain threshold was significantly increase at lower limbs(p<0.01). 3) In comparance of pain threshold of limbs between healthy adult and adult hemiplegia, pain threshold was showed a significant defferance at the upper and lower limbs of affected side before hot pack application(p<0.05, p<0.01).