• 설비공학논문집
• /
• 제9권1호
• /
• pp.73-81
• /
• 1997

In this experimental study, the air cooling radial shape heat exchanger which influences on the COP and the cooling capacity by heat and mass transfer rate in the adsorbent bed was designed and applied to test its performance for adsorption heat pump(AHP). Zeolite-water was used for the adsorbent-adsorbat pair. As a result, the cooling COP and a cycle period of this adsorption heat pump are 0.28 and 2 hours, respectively, on the condition of none heat recovery from the adsorption reactor(absorber). The other results and recommendations are mainly related to improving the heat and mass transfer inside the absorber to reduce a cycle period.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.341-346
• /
• 2005

Nowadays, adsorption chillers have been receiving considerable attentions as they are energy-saving and environmental1y benign systems. A Fin & tube type heat exchanger in which adsorption/desorption take place is required more compact size. The adsorption chiller is expected to have high energy-efficiency in utilizing the waste heat exhausted from a process. The objectives of this paper are to investigate the effect of fin pitch of fin & tube on the adsorption performance and to develop an optimal design fin & tube heat exchanger in the silica gel/water adsorption chiller. Previous study concluded that optimal particle size selected 0.5mm, type HO silica gel, and fundamental heat transfer & mass transfer experiments carried out. From the numerical results, the adsorption rate for the fin pitch 2.5mm is the highest than that for the fin pitch 5mm, 7.5mm and 10mm. Also cooling water & hot water temperature affect the adsorption rate.

• 설비공학논문집
• /
• 제25권8호
• /
• pp.457-463
• /
• 2013

Nowadays, adsorption chillers have been receiving considerable attention, as they are energy saving and environmentally benign systems. A fin tube type heat exchanger in which adsorption/desorption takes place is required with more compact size. The adsorption chiller is expected to have high energy efficiency in utilizing the waste heat exhausted from a process. The objectives of this paper are to scrutinize the effect of design parameters on the adsorption performance, especially the fin pitch of the fin tube, and to develop an optimal design fin tube heat exchanger in a silica gel/water adsorption chiller. From the numerical results, the fin pitch of 2.5 mm shows the highest adsorption rate, compared to other fin pitches, such as 5 mm, 7.5 mm and 10mm. Also, the adsorption rate is affected by the cooling water and hot water temperature.

• 한국태양에너지학회 논문집
• /
• 제33권6호
• /
• pp.39-46
• /
• 2013

This work introduces a simple one-reactor adsorption desalination system that harnesses low temperature heat sources (solar energy, waste heat), which has been experimentally studied to elicit the most suitable design parameters and operating conditions. The design process of the system was divided into three parts to reflect the operating principle of desalination technology with application of adsorption processes. First, the evaporator for the vaporization of saline water was designed, then the reactor for the adsorption and release of the steam, followed by the condenser for condensation of the fresh water. The specific water yield is measured experimentally with respect to the time while controlling parameters such as heat source temperatures, coolant temperatures, system switching and half-cycle operational times. The present system well demonstrates the applicability of silica gel in relation to adsorption technologies that utilize low temperature heat sources ranging from 60 to $80^{\circ}C$, such as solar energy and waste heat.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.71-76
• /
• 2013

This study is experimentally performed for using the oyster shell as a desiccant in the batch type system. The peltier element(thermoelectric device) is used for absorbing and releasing the adsorption and desorption heat generation. The cooling and heating effects of peltier element exist in this experiment and these effects are generally known phenomena among some references. The increase in electric current induced into peltier element is effectively release the heat generation of adsorption and desorption. Consequently, the non-dimensional adsorption and desorption amount would increase with increase in electric current. However, in the case of adsorption, the increase of induced current into peltier element, the heat of cold side can not release sufficiently. So the heat of hot side of peltier is transferred into the cold side.

• 한국결정성장학회지
• /
• 제12권3호
• /
• pp.115-119
• /
• 2002

흡착열 공간분포함수를 외형적으로 포함하는 흡착등온식을 형식화한다. 요철모형 흡착열 공간분포함수를 사용하여 우리가 유도해낸 흡착등온식을 직접 계산해 보고, 계산 결과로부터 모형계의 흡착특성을 분석한다. 이를 통하여 우리가 새로이 형식화한 흡착등온식의 유용성 여부를 확인한다. 본 논문은 통계열역학이 적용되었다.

• 한국재료학회지
• /
• 제27권3호
• /
• pp.127-131
• /
• 2017

Isosteric heat of hydrogen adsorption is one of the most important parameters required to describe solid-state hydrogen storage systems. Typically, it is calculated from adsorption isotherms measured at 77K (liquid N2) and 87K (liquid Ar). This simple calculation, however, results in a high degree of uncertainty due to the small temperature range. Therefore, the original Sievert type setup is upgraded using a heating and cooling device to regulate the wide sample temperature. This upgraded setup allows a wide temperature range for isotherms (77K ~ 117K) providing a minimized uncertainty (error) of measurement for adsorption enthalpy calculation and yielding reliable results. To this end, we measure the isosteric heats of hydrogen adsorption of two prototypical samples: activated carbon and metal-organic frameworks (e.g. MIL-53), and compared the small temperature range (77~87K) to the wide one (77K ~ 117K).

• Carbon letters
• /
• 제11권1호
• /
• pp.34-37
• /
• 2010

In this work, graphite nanofibers (GNFs) were prepared by ammonia and heat treatment at temperatures up to $1000^{\circ}C$ to improve its $CO_2$ adsorption capacity. The effects of the heat treatment on the textural properties and surface chemistry of the GNFs were investigated by $N_2$ adsorption isotherms, XRD, and elemental analysis. We found that the chemical properties of GNFs were significantly changed after the ammonia treatment. Mainly amine groups were formed on the GNF surfaces such as lactam groups, pyrrole and pyridines. The GNFs treated at $500^{\circ}C$ showed highest $CO_2$ adsorption capacity of 26.9 mg/g at 273 K in this system.

• 공업화학
• /
• 제18권3호
• /
• pp.245-250
• /
• 2007

실리카겔의 열처리 온도에 따른 1,2-dichlorobenzene의 흡착 특성을 모멘트 법으로 고찰하였다. 실리카겔의 열처리 온도는 150, 500, $800^{\circ}C$로 변화시켰으며 고정층 반응기를 사용하여 TCD (Thermal Conductivity Detector)가 장착된 기체크로마토 그래프에서 1,2-dichlorobenzene의 펄스 응답곡선을 측정하였다. 1,2-dichlorobenzene의 평형흡착상수와 표면 흡착열은 열처리 온도 $500^{\circ}C$에서 가장 높은 값을 나타내었다. 열처리 온도가 증가함에 따라 실리카겔 표면의 수분과 OH 작용기가 제거되어 1,2-dichlorobenzene과의 상호작용이 증가한 것으로 판단된다. 고온인 $800^{\circ}C$에서 열처리한 실리카겔은 비표면적이 감소하여 평형흡착상수와 흡착열, 모두 감소한 것으로 사료된다. 모멘트 해석으로 계산된 축분산 계수는 $0.046{\times}10^{-4}{\sim}1.033{\times}10^{-4}m^2/sec$였으며 기공 내의 확산계수는 $500^{\circ}C$ 열처리 실리카겔에서 가장 낮은 것으로 나타났다.

• 한국식품과학회지
• /
• 제23권6호
• /
• pp.656-660
• /
• 1991

해바라기 종실제품(종실, 착유박, 농축단백, 분리단백)의 수분흡착열을 $10,\;20,\;30^{\circ}C$에서 측정한 등습곡선(isostere)으로부터 구하였고, 수분함량에 따른 흡착열의 변화를 Hunter 방정식에 의거하여 해석하였다. Hunter 방정식에 의한 예측치는 실측결과와 잘 일치하였으며 단백질함량이 증가할수록 정확도가 높았다. 흡착열은 수분함량이 높을수록 감소하였으며, 단백질함량이 높을수록 증가하였다. 해바라기종실의 흡착열은 건물기준 수분함량 4-12%에서 11.8-10.6 kcal/mole이었으며 분리 단백의 경우 수분함량 6-20%에서 12.4-11.0kcal/mole 이었다.