• Steel and Composite Structures
• /
• v.38 no.5
• /
• pp.523-531
• /
• 2021

The generalized thermoelastic analysis problem of a two-dimension porous medium with and without energy dissipation are obtained in the context of Green-Naghdi's (GNIII) model. The exact solutions are presented to obtain the studying fields due to the pulse heat flux that decay exponentially in the surface of porous media. By using Laplace and Fourier transform with the eigenvalues scheme, the physical quantities are analytically presented. The surface is shocked by thermal (pulse heat flux problems) and applying the traction free on its outer surfaces (mechanical boundary) through transport (diffusion) process of temperature to observe the analytical complete expression of the main physical fields. The change in volume fraction field, the variations of the displacement components, temperature and the components of stress are graphically presented. Suitable discussion and conclusions are presented.

• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.469-476
• /
• 2022

A mathematical model of Lord-Shulman photo-thermal theorem induced by pulse heat flux is presented to study the propagations waves for plasma, thermal and elastic in two-dimensional semiconductor materials. The medium is assumed initially quiescent. By using Laplace-Fourier transforms with the eigenvalue method, the variables are obtained analytically. A semiconductor medium such as silicon is investigated. The displacements, stresses, the carrier density and temperature distributions are calculated numerically and clarified graphically. The outcomes show that thermal relaxation time has varying degrees of effects on the studying fields.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.3 no.2
• /
• pp.87-90
• /
• 1998

Hemolymph is oxidized and darkens visibly during the collection from silkworm due to the activity of tyrosinase in it. Toxic quinones are produced by the oxidation and consequently inhibit the cell growth. Heat treatment can be used to prevent the oxidation ; however, the oxidation may occur during the collection of hemolymph before it is heat-treated. It makes the hemolymph collection difficult especially on a large-scale preparation. Hemolymphs collected from 257 different strains of silkworms were examined to select the slowly oxidized hemolymphs. Hemolymphs collected from mutant strains such as Lemone, TBO, Cre, Y4, and wEb showed relatively slow color changes. Oxidation rates of the hemolymphs were measured by the absorbance change using a spectrophotometer. The hemolymph of wEb showed the slowest oxidation. The absorbance of this mutant hemolymph reached the saturation value at 20$^{\circ}C$ in 450 min, whereas the total oxidation time of the wild-type (Baekokjam) hemolymph at the same temperature was 120 min. We tested if this mutant hemolymph is useful as a medium supplement for insect cell culture. Cell growth rate and final cell concentration in the medium supplemented with the wEb hemolymph were almost same as those in the medium supplemented with the wild-type hemolymph. Hemolymph is collected on a small scale by clipping the abdominal leg; however, this method is not appropriate fro large scale preparation. Centrifugation after chopping the silkworm hemolymph by a blending mixer is a more appropriate procedure for large scale collection. Slowly oxidized wEb hemolymph resulted in higher cell concentration than the wild-type hemolymph when hemolymph was collected by the large scale preparation method.

• Resources Recycling
• /
• v.22 no.4
• /
• pp.46-54
• /
• 2013

The produced quantity of waste plastics including waste vinyls was assumed as about 5 million tons per year. The quantity of waste vinyls produced from the waste recycling center among total quantity of waste plastics was estimated as about 1 million tons per year. Most of waste vinyls produced from the waste recycling center were recycled as refuse plastic fuel(RPF) or recycled feedstock material. In this study, the medium material using waste vinyls was made by the melting process of heat medium heating and the tensile strength was analyzed for checking the usable possibility of recycled waste vinyl material by comparing with the existent product. In order to use the medium material for producing the recycled product, it can be considered that the tensile strength of medium material is more than 100 $kgf/cm^2$.

• Journal of Food Hygiene and Safety
• /
• v.12 no.4
• /
• pp.304-309
• /
• 1997

A study was undertaken to determine the thermal inactivation of Escherichia coli O157:H7 as influenced by the effects of temperature, time, suspension medium and ascorbate. Tryptic soy broth was more heat resistant than pfosphate buffer (pH 7.1), with D values of 1.52~1.68 min at 6$0^{\circ}C$ and 1.51~1.63 min at 7$0^{\circ}C$ compared with 1.52~1.65 min at 6$0^{\circ}C$ and 1.26~1.61 min at 7$0^{\circ}C$ for phosphate buffer as suspension medium. E. coli O157:H7 was completely inhibited within 30 min when small inoculum (106 CFU/$m\ell$) was heated at 7$0^{\circ}C$. When E. coli O157:H7 was preheated at 48$^{\circ}C$ for 60 min in phosphate buffer before heating, D values were 1.28~1.60 min at 6$0^{\circ}C$, and 1.13~1.56 min at 7$0^{\circ}C$, showing that preheating increases the heat resistance of the strain. Phosphate buffer containing ascorbate (0.001 M) was enhanced the thermal inactivation of the strain when inoculated as large inoculum (109 CFU/$m\ell$), while ascorbic acid was no effect at low cell concentrations (109 CFU/$m\ell$).

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.4
• /
• pp.10-22
• /
• 1990

A study has been investigated on the effect of mechanical properties (tension strength, rotary bending fatigue strength, wear resistance, hardness) according to the carbide particle size variation by the treatment of 1) quenching tempering, and 2) quenching, subzero treatment and tempering. The material used in this investigation was a typical bearing steel, high C high Cr, AISI E 52100. The result obtained in this study were as follows : (1) Finer the carbide particle size increasing the hardness and retained austenite in same quenching condition. (2) Finer the carbide particle size reduced the tension and rotary bending fatigue which were resulted from austenite grain growth and carbide precipitation on grain boundry that induced by carbide refine heat treatment. (3) Finer the carbide particel size increasing the wear resistance which were resulted by uniform distribution of carbide and increased hardness induced by microstructural uniform hardenability of matrix. (4) When the carbide particles were refinded, subzero treatment is effective only wear resistance and hardness.

• Journal of Veterinary Clinics
• /
• v.28 no.1
• /
• pp.75-80
• /
• 2011

Proteomics is a useful approach to know protein expression, post-translational modification and protein function. We investigated the protein expression pattern and identity in pigs fed with the tissue culture medium waste after harvest of Korean wild ginseng (TCM-KWG) (Panax ginseng). Two groups (n = 30/group) of pigs were administered with 0 (control) and 16 ml/L (treatment) TCM-KWG through drinking water. After 4 weeks, we examined the protein expression pattern of longissimus dorsi muscle by Two-dimensional electrophoresis analysis. TCM-KWG treatment significantly increased two spot's density, and markedly reduced one spot's density in the muscles. We identified 3 proteins (heat shock protein 90-alpha, myosin binding protein and cofilin 2) by the ESI-MS/MS (Q-TOF2, Micromass). These results demonstrate that TCM-KWG treatment may play a protection role against physiological stress in pigs, like as increased heat shock protein 90-alpha.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.95-101
• /
• 2003

Ultrasonic transmitter used for scale prevention in boiler or heat exchanger is composed of the magnetostrictive material which transforms electric energy into ultrasonic wave and the horn which amplifies generated ultrasonic wave and transfers it into medium loaded. In this paper, we have performed the shape design for magnetostrictive material and analyzed a few type of horns which amplify generated ultrasonic wave and found each solution theoretically. Final length of the horn has been determined by measuring the sound pressure in medium between theoretical value and experience data. At last we have given the results of our study for the effects of ultrasonic wave irradiated by manufactured ultrasonic transmitter on preventing scale deposition on test pipe under the similar condition to boiler.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.852-857
• /
• 2014

This study was carried out to develop a simple, convenient, and reproducible testing device to determine wettability and dispersibility of dairy powders. The testing device consists of a sieve ($150{\mu}m$) attached to a sample chamber, sensors mounted on a supporting body and a main control unit containing a display panel. The sensors detect the difference in electrical resistance between air and water. A timer is automatically triggered by the sensor when the bottom of sample-loaded chamber contacts water in the petri dish. Wettability and dispersibility of commercial skim milk powders (SMPs) produced at different heating strengths (low-, medium-, and high-heat SMP) are compared using the new testing device. Wettability of the SMPs were correlated with particle size and are found to increase in the order of medium-, low-, and high-heat SMP regardless of the amount of sample tested. Dispersibility of SMPs showed the same trend and high heat-SMP which has the smallest particle size resulted in the lowest dispersibility. Unlike existing methods, the new testing device can determine both wettability and dispersibility of powders and successfully detected differences among the samples.

• Journal of Sericultural and Entomological Science
• /
• v.21 no.1
• /
• pp.15-20
• /
• 1979

Optimum conditions for rooting of hardwood cuttings of two mulberry varieties have been determined with respect to the concentration of IBA applied to the base of cutting, dipping depth into IBA solution, season of cutting collection and rooting medium in the bottom heat bins. 1. Optimum range of IBA concentration was 2,000 p.p.m.∼4,000 p.p.m. in Sariasi and Ichinose. 2. Most optimum dipping depth of cutting was 2.5 cm from the base of cutting 3. Rooting occurred most readily during December and March. 4. Perlite was the best medium to produce hardwood cuttings in the bottom heat bins.